Question about 1997 GMC Jimmy

1 Answer

Wiper arm removal 1997 GMC Jimmy

The pass. side wiper arm wont move while the driver one does. New wiper motor (tried replacing the board on old one). Turns out wiper motor was bad.
How do I remove the pass wiper arm to repair?

Posted by on

  • 4 more comments 
  • Anonymous Mar 17, 2014

    I replaced the wiper arm blade on my 96 GMC Jimmy passenger side. The blade does not move.

  • Anonymous Mar 21, 2014

    How to replace wiper arm

  • Anonymous Mar 21, 2014

    i cannot get the wiper arms off

  • Anonymous Mar 21, 2014

    how do i remove the wiper arms

  • Anonymous Mar 25, 2014

    remove driver side wiper arm

  • Anonymous Mar 31, 2014

    the wiper wont budge not a sound how do i remove the motor

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 2,920 Answers

Youll have to raise the hood on the truck to access the screws that hold it in place there should be 2 of them holding it

Posted on Oct 25, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The drivers side wiper will not sweep, when I turn on the wipers the passenger side works fine. The driver side attempts but doesnt sweep. So I doubt its the wiper motor. any ideas are welcome.


check the nut at the base of the wiper arm . There is a splined taper on the end of the wiper arm shaft and if this is loose then the arm shaft moves but it turns inside the base of the wiper arm.

Oct 22, 2014 | 2001 Chevrolet Chevrolet Blazer

2 Answers

Windshield wiper linkage


sounds like the wipers are stuck if you have to force them when disconnected from the motor, try lubricating all moving parts,

Jan 29, 2018 | Toyota Tundra Cars & Trucks

1 Answer

Taurus wiper blade wont work drivers side


Sounds like the pivot stud is stripped, or the linkage under the cowl is broke.
You can take the arm off the stud and see if the stud turns by hand.

Feb 04, 2013 | 2003 Ford Taurus

1 Answer

Passenger side wiperblade arm not moving, driver's side working fine.


you need to check to make sure the "arm" is moving , some gm vehilce have a sealed wiper unit, but the alero should still have arms. turn wipers on and look down at the cowl vent and see if it appears to move. if it is the mounting post for the arm on the passenger side has PROBABLY stripped out the soft lead mount at the bottom of the wiper arm. make sure the wipers are "parked", then carefully try to wiggle the pass side back and forth (its normal motion...). if it moves you will need to pop the arm off(super careful here..) and the post that looks smooth must be cleaned out with a fine pick or equilalent, the post accually has splines all around to engage the wiper arm. put on the new arm.. presto.... wipers.

Mar 06, 2011 | 2004 Oldsmobile Alero

1 Answer

Can't move wimdshield wiper arms on 91 ford ranger


Dis connect the transmission from the motor and turn the wiper motor on,then turn it off,when it stops,attach it to the transmission with the wipers in down(rest) position,then it will do right.

Apr 08, 2010 | 1991 Ford Ranger Supercab

2 Answers

My driver side wiper is not moving but the passenger side is. It is a 1993 Mazda MX6 LS. Any ideas?


it seems the motor is working ok so it only leaves your linkage or the actual wiperarm mounting to fault.remove the retaining nut on the drivers side wiper arm usually a 12 or 13 mm spanner.once removed turn wipers on and keep hands clear, look at the drivers side spindle,if it turns when the other wiper moves your linkage is ok and you need a new arm, if it dosn't move then its your linkage,hope this helps!

Feb 17, 2010 | 1993 Mazda MX-6

3 Answers

Driver side wiper does not move; passenger side wiper crosses over it


In view of the answer from jchaffcom I feel that if there is a Hex on the end of the Wiper Arm the Hex Nut needs Tightened. I have a 2004 Silverado and this is what happened to it. Simply tightening the Nut solved my problem. Try it and get back to me with the results whether good or bad.

Fastest Robe

Dec 04, 2009 | 2003 Chevrolet Impala

1 Answer

2003 Buick. The pass side wiper stopped working,


the arm mechanism has a clip that pop off get a new clip and remove the access panel and move the arm over to the access area put the arm back into the hole socket and reattache clip , not the easiest repair but with a long pair of needle nose pliers you should have a better chance to complete repair. Some cars to access the arm the wiper motor must be disconnected and pulled out slightly then move wiper over and reattache pin arm into lever hole nstall clip.

Jul 08, 2009 | 2003 Buick Regal

2 Answers

Pass side wiper not working on 2002 volvo s40


Ok, this is a bad motor and you will have to replace this failed motor. this will fix the issue.


Apr 22, 2009 | 2002 Volvo S40

1 Answer

2004 Dodge Caravan - Passenger Wiper does not move


start the caravan turn wiper off with the switch remove the capon the wiper arm most of the time the nut holding the arm in place is loose tight it up and try it thanks pierre

Dec 07, 2008 | 2004 Dodge Caravan

Not finding what you are looking for?
1997 GMC Jimmy Logo

Related Topics:

534 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

77544 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...