Question about 2006 Chevrolet Impala SS
If you have the SS remove the fues panel cover and take the two nuts off at the top of the pannle lift it up and look under it you will see the thin wiring harness running down between the strut tower and the behind the serpentine belt follow it down to a plug-in lift to unplug the clip and you will find the cam position sensor there is one 8mm screw holding in place. Remove that screw wiggle the cam position sensor left and right and it will pull out replace it with a new one and reverse the procedure. The car will crank but not start if this part is bad.
Posted on Dec 11, 2017
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
At the right rear of the engine under the intake manifold and to the left of the oil filter. You will probably need to go under the car to spot it, it's the sensor with a three-wire connector arranged vertically. But you can take it out from above. It's held in with a single bolt with an eight MM head located just above the sensor. Un-clip and remove the electrical connector. Unscrew the bolt with a socket wrench & extension bar. Wiggle and pull the sensor out.
here is a picture.
Posted on Apr 10, 2009
IF U GO TO THE RIGHT SIDE OF THE ENGINE AND LOOK 4 INCHES BEHIND THE BELT IT WILL BE ON TOP OF THE TIMING COVER.THE WIRES WILL BE RED/WHITE,BLACK,BROWN/WHITE
Posted on May 05, 2009
It's held down by one bolt right above the timing chain cover. It's next to the head that's facing toward the front of the car.
Posted on Feb 06, 2009
Tips for a great answer:
Nov 07, 2017 | Cars & Trucks
Jan 04, 2016 | 2006 Chevrolet Impala
Aug 21, 2015 | Cars & Trucks
Apr 17, 2015 | 2006 Chevrolet Cobalt
May 23, 2011 | 2006 Chevrolet Impala
Mar 07, 2011 | 2006 Chevrolet Impala
Nov 26, 2009 | 2006 Chevrolet Impala
1,865 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: