Question about 2003 Ford Ranger Regular Cab
Not sure but my ranger 4 x4 seems to be in 4 wheel drive all the time even if not selected.
Confrim this by lifting the front wheels off the ground, if that is the case the 4X4 Transfer case may be jammed or low on fluid. You may also have a defective actuator at the transfer case.
Posted on Feb 15, 2012
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: 4 wheel drive
there is a way to do that.....all you have to do is go get the manual locking hubs and switch it over...not that hard....did it to a early 90s f150....pretty easy.
Posted on Sep 30, 2008
SOURCE: 1993 FORD RANGER 4 WHEEL DRIVE
there is an actuator on the back of the transfer case that likes to fail odds are this is where your problem is. check power and ground here and if you have both replace the actuator
Posted on Dec 01, 2008
Chances are the linkage for the transfer case is out of adjustment try loosening the adjuster bolt and put the 4WD shifter into the position 4WD high or low (depending upon which position it's lockup in) then lock down the adjuster bolt, try to shift out of 4wd sometimes you need to go forward and backward with the vehicle to get it out of 4wd, when you get it out of 4wd you may have to fine tune the adjustment to get it to engage and disengage smoothly it's a trial and error thing keep resetting adjuster until you get the desired effect.
Posted on Jul 02, 2009
the 4x4 don't use vacuum. the front is auto lock when the transfer is engauged with the button. if the light don't which when pressed into 4hi or 4low. the motor on the transfer case maybe hung up. they have to be used at least 4 times a year not to go bad. the motor is on the back side of the transfer case. best of luck.
Posted on Aug 07, 2009
Tips for a great answer:
Sep 14, 2015 | 1999 Ford Ranger SuperCab
Dec 20, 2011 | Dodge Ram Cars & Trucks
Apr 27, 2011 | 1987 Ford Ranger
Oct 14, 2010 | 1998 Ford Ranger SuperCab
Oct 29, 2017 | 2003 Chevrolet Avalanche
Dec 01, 2009 | 2000 Ford Ranger SuperCab
Mar 18, 2009 | 1999 Ford Ranger SuperCab
203 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: