Question about 1993 Oldsmobile Cutlass Ciera

1 Answer

High Level 3rd Center Stop Light

Anyone know how to change the bulb (I'm assuming there's a bulb) in the
High Level 3rd Center Stop Light in the center of my back window?
Car is a 1994 Olds Cutlass Cierra. Fuse is a-ok. Other stop lights in the rear of the car work OK. I have a warning ticket from the police to fix this.

I looked in the trunk and there's some clips that look like they could be pushed in for the front of the unit; but the back of the unit looks like it's screwed in from the top of the shelf behind the back seat. I can't seem to get the holding unit loose from the top (inside of the car) or the trunk.

Any ideas?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Oldsmobile Master
  • 77,202 Answers

It is removed from inside the truck, that I know for sure, the exact method of retaining it I am not sure of.

FixYa.com claims they have factory repair manuals, they have nothing of the sort, this is not to say some experts may have manuals, we do, but we work from home and in most cases have a small library. Experts are not employed by FixYa.com, we help free of charge as much as we can with the general automotive knowledge we have learned while working as auto technicians, specific test values, repair procedures and illustrations are unique to each car line, these are not in most cases available to us. Thanks for using FixYa!

Posted on Nov 03, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Does the brake switch also operate the high mount brake light


Hi,
Get the original bulb for that 3rd brake light from the dealer parts center.
Tell them( parts dealer center ) the model of your vehicle and they will provide necessary part.

Hope that helps!

Nov 30, 2011 | Dodge Cars & Trucks

2 Answers

Center brake light working but neither tail light brakes working both bulbs good


the center and brake light are not on the same circuit, check voltage coming from the switch

Mar 28, 2011 | 2001 Dodge Durango

2 Answers

I need to replace high 3rd stop light on 1996 pontiac grand am se


  1. Disconnect the negative battery cable.
  2. Pull the center high-mount stop lamp cover to disengage the retaining tabs.
  3. Unfasten the lamp retaining screws.
  4. Remove the sockets using a suitable prybar to release the retaining tabs.
  5. Detach the bulbs from their sockets.
  6. Using a suitable prybar to release the tabs, remove the lamp lens.

8af06eb.gif
View of the center high-mount stop lamp assembly—1995 Grand Am and Achieva shown

7. Installation is the reverse to install. Connect the negative battery cable, then check the lamp for proper operation.

Jan 18, 2010 | 1996 Pontiac Grand Am

3 Answers

I have a 2006 pontiac vibe. The shift is in the center console area (not on the steering wheel) and at night you can't tell if you are in park, reverse, or drive bc their are not lights. Are they burned...


2006 Pontiac Vibe Car Light Bulb Size Chart
Low Beam Headlight Bulb Size: 9003/HB2
High Beam Headlamp Light Bulb Size: 9003/HB2
Parking Light Bulb Size: 1157A
Front Turn Signal Light Bulb Size: 1157A
Rear Turn Signal Light Bulb Size: 7440
Tail Light Bulb Size: 7443
Stop Light Bulb Size: 7443
High Mount Stop Light Bulb Size: 921
Fog/Driving Light Bulb Size: 9006
License Plate Light Bulb Size: 168
Back Up Light Bulb Size: 7440
Dome Light Bulb Size: DE3175
Step/Courtesy Light Bulb Size: DE3175

Heres the shifter:
(IMG:http://i50.tinypic.com/29b0wer.jpg)
Push The little plastic cover up:
(IMG:http://i46.tinypic.com/2hzhn3l.jpg)
Put your finger under the plastic cover:
(IMG:http://i48.tinypic.com/2wr2bs4.jpg)
And simply pop it off (IMG:style_emoticons/default/smile.gif) :
(IMG:http://i45.tinypic.com/i5c5ll.jpg)
And there's the bulb, you'll probably need tweezers to get it off:
(IMG:http://i50.tinypic.com/2ng7lfd.jpg)

Good luck

Dec 10, 2009 | 2006 Pontiac Vibe

1 Answer

1996 Lincoln Continental : Instructions given by others=dont work


The sides of the third light inside of the car have plastic revits in each side looking carefully with a bright flashlight you can see them the center of the rivit can be pushed in about an eighth Inch and the rivit can be pryed out. onece the rivets are out the whole light will come off its mount. Watch as you do this as you need to put it back.turn it over and change the bulbs. The owners manual in the maintaince section tels the way and it's called the high mount brake light

Aug 15, 2009 | 1995 Lincoln Town Car

1 Answer

How to get to stop light in back window of 95 lincoln cont. Bulb is burnt out. do we change from trunk side or inside of car? also have a problem with interior lights staying on for a long time after car...


First, the stop light bulb is accessible from inside the car. The cover can be removed by pressing down on the center of the unit and pull back toward the front of the car. Once off, you will have access to the bulb itself

You have a sticky door switch. Apart from replacement, best course of action is to spray the switch (all throughout the inside of the door/lock) with WD-40. Since you're unsure which switch is sticking, repeat this procedure on all doors. Once thoroughly lubricated, open and close the doors several times. This should fix your sticky switch problem.. Best of luck.
Greg

Jun 08, 2009 | 1995 Lincoln Town Car

1 Answer

High mount stop lamp stays on


must have a short somewhere. start at the high mount light and trace it back. I know that is not easy but thats the only way i know to find it.

Jun 06, 2009 | 1993 Buick Roadmaster

1 Answer

Brake lights only show on center 3rd high stop tail lamp


Yes, the flasher does interrupt the brake signal. you do know that this is a push on, push off switch. Some try to pull this switch to turn off flashers, but, it has to be pushed again to turn off.

Nov 30, 2008 | 1999 GMC Suburban

1 Answer

Center High Level Stop Light


that s exactly it and its a 194 bulb/ Please rate my response thank you very much

Oct 28, 2008 | 1994 Oldsmobile Cutlass Ciera

Not finding what you are looking for?
1993 Oldsmobile Cutlass Ciera Logo

81 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

77202 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8759 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...