Question about 1994 Pontiac Bonneville

1 Answer

I need the head bolt torque specs for a 94 bonniville with the 3.8l v6

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Pontiac Master
  • 76,164 Answers

A few notes. These head bolts are what are called torque to yield, this means they are like a spring and are only used once or the torque spec is not valid.
1ST 37 ft/lbs + 130 degrees OF BOLT ROTATION THEN REPEAT WITH 30 MORE degrees OF ROTATION. there IS NOT A SET TORQUE SPEC IN FT POUNDS

Posted on Feb 15, 2012

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
johnjnail
  • 1702 Answers

SOURCE: need 2 know torque specs 4 2001 pontiac sunfire

cylinder head bolts short bolts 43 ft lbs long bolts 46 ft lbs.

rocker arm bolts 22 ft lbs.

Posted on May 18, 2011

  • 393 Answers

SOURCE: Head bolt torque specs for 1992 Pontiac 3.1 ltr

the last time i did the same job the gasket kit had the specs inside the box. the parts store should have a book/reference manual

Posted on Dec 09, 2008

  • 16 Answers

SOURCE: 1991 Pontiac Sunbird Head bolt torque sequence and timing marks

torque sequence for head bolts start in the middle of the head barely tighten this and work your way out doing one bolt toward the back and one toward the front on the second pass torque to 30 ft lbs on the second pass torque to 60 ft lbs dunno about the timing marks

Posted on May 01, 2009

Mr BrokRench
  • 1623 Answers

SOURCE: 1994 Pontiac Firebird 3.4 litre V6

28-33 ft/lbs

Posted on Jun 13, 2009

csmock132
  • 4669 Answers

SOURCE: need the head bolt torque specs for a 1999 grand

There is a service bulletin on this. They have changed the spec, The new spec is 44ft lbs. Then an additional 95 degrees. Start from the center and work you way out

Posted on Mar 30, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How much torque for each head bolt in a 2004 Dodge ram 1500 3.7 liter


Install the cylinder heads. Use new gaskets and tighten the bolts, in sequence, as follows:
  1. Step 1: Bolts 1-8 to 20 ft. lbs. (27 Nm)
  2. Step 2: Bolts 1-10 verify torque without loosening
  3. Step 3: Bolts 9-12 to 10 ft. lbs. (14 Nm)
  4. Step 4: Bolts 1-8 plus 1 / 4 (90 degree) turn
  5. Step 5: Bolts 9-12 to 19 ft. lbs. (26 Nm)


26002143-2qxw3km0vcnqu3setvnduoab-2-1.gif

Dec 10, 2015 | Dodge Cars & Trucks

1 Answer

1999 ford explorer blown head gasket. is it ok for the head be resurfaced. V6


well experts recommend that, i replaced a head gasket to a 94 toyota 4runner and i did not resurfaced, all i did was a visual inspection of valves springs seats etc,and of course a good clean aruond both surfaces, block and head, if all this looks good, go ahead, goodluck. head bolts must torque to spec. good luck

Jul 15, 2011 | Ford Explorer Cars & Trucks

1 Answer

I need head bolt torque specs. for a 2002 ford f150 v6


Torque Specifications for Ford 4.2L-256ci-V6
These bolts are torque and turn procedure!
STEP 1: 14 FtLbs STEP 2: 29 FtLbs STEP 3: 36 FtLbs STEP 4: LONG Bolts Loosen 3 Turns - re-torque to 33FtLbs STEP 4: SHORT Bolts Loosen 3 Turns - re-torque to 19FtLbs STEP 5: ALL Bolts +180deg turn

Aug 05, 2010 | 2002 Ford F150 Regular Cab

1 Answer

Head bolt torques spec


3.8L V6

cylinder head bolt torque

step 1 37 ft lbs.

step 2 an additional 130 degrees

step 3 4 center bolts an additional 30 degrees

Jul 07, 2010 | 1999 Buick LeSabre

3 Answers

Need to know the head bolts torch specs on 98 toyota v6


heres the torque specs and the way to tighten the head bolts for your 1998 toyota sienna, hope this helps,
12 point bolts step 1- 40 ft lbs
step 2- additional 90 degrees
recessed bolt 13 ftlbsaf151d2.gif

May 12, 2010 | 1998 Toyota Sienna

1 Answer

I need the engine torque specs for 99 chevy malibu. like the head bolt torque sequence and rocker bolt torque sequence


99 chevy malibu v6 3.1 engine, head bolt torque is-- 98 through 2001 is step1- 37 foot lbs, step 2- rotate an additional 90 degrees (1/4 turn). the rocker arm bolts are 168-in. lbs.

Mar 12, 2010 | 1999 Chevrolet Malibu

1 Answer

94 mazda B3000 3.0L cylinder head torque specs


Step 1 torque to 59 ft pounds
2. Loosen one full turn
3. 37 ft pounds
4. 68 ft pounds

Use torque sequence below
aca9f77.gif

Sep 17, 2009 | 1994 Mazda 2WD B Series Pickup

1 Answer

I need torque specs for 94 rodeo


flywheel 80-90 foot lbs (new bolts 90), press plate 45 foot lbs

Feb 14, 2009 | 1995 Isuzu Rodeo

2 Answers

NEED TORQUE SPECS AND SEQUENCE FOR 02 DODGE 2.4 V6 STRATUS


  1. Tighten bolts in sequence shown in (Fig. 23), using the following steps and torque values:
    • Step 1: Bolts 1 - 8 to 48 Nm (35 ft. lbs.)
    • Step 2: Bolts 1 - 8 to 75 Nm (55 ft. lbs.)
    • Step 3: Bolts 1 - 8 to 75 Nm (55 ft. lbs.)
    • Step 4: Bolts 1 - 8 to +90° . Turn Do not use a torque wrench for this step.
    • Step 5: Bolts 9 - 11 to 28 Nm (250 in. lbs.)
  • I tried to send a pic of the head bolt numbers but it wont let me so e mail me dbern002@att.net have a good day DB

Feb 01, 2009 | 1997 Dodge Avenger

1 Answer

Head bolt torque specs and timing marcs for a 94 volvo 960 6cyl


you do 14 foot pounds then 45 foot pounds then a 120 degree turn.if aluminum heads are what you have

Oct 05, 2008 | 1992 Volvo 960

Not finding what you are looking for?
1994 Pontiac Bonneville Logo

337 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...