Question about Nissan Cars & Trucks

Open Question

Hinges on back doors of nissan interstar have ceased

Hinges on back doors of nissan have ceased really difficult to open or close doors

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 6 Answers

SOURCE: 1999 clk 320 driver door makes loud clicking noise

tony i'm assuming you on about the little bar/plate about an inch wide which seems to rattle about when you open the door??? This is i suppose the check strap and it is designed to hold the door open while not letting the door go too far and become hingebound, bending the hinge and possible damaging the door panel. If it is making a clicking noise it may need a bit of lubrication as it will go over some kind of ball or ridghe to slow it down. If it is completely loose it may be catching something inside the door, possibly the window frame guide or the internal skin of the door. check the mounting bolts on the door post and in the resess on the door and tighten them up and lubricate the rod. You may need to remove internal door skin, window switches etc to get to it. what ever you do do not remove it altogether, as one day the wind may catch it and take the door right around 180 degree causing serious damage, they are not designed to stop the door completely and can stretch if the wind does catch it so check it for damage to as it could effect the door hinges later on

Lee

Posted on Mar 16, 2009

Ad
  • 260 Answers

SOURCE: Need to grease driver side door hinge on our 2005 Sienna.

If you can get a can of lithum grease in a spray can use the straw to spray on inside of hinge this may save you time.

Posted on Apr 09, 2009

co7196
  • 3433 Answers

SOURCE: 1995 Chevy suburban back door hinges too stiff

Lubricate the hinge or the hinge will have to be replaced.. I recommend wd40 first, then a finger tip amount of grease on top of hinge pin. the oil from the grease will keep the hinge constantly lubricated. It's not too late.

Posted on May 22, 2009

MNfisherman
  • 11896 Answers

SOURCE: Driver side window stuck on Nissan Maxima 2004

It is likely the window motor is wearing out and will need to be replaced. You can always try a different switch on those wires to rule out switch problem. Otherwise, the motor will have to be replaced.

Posted on May 25, 2009

  • 2 Answers

SOURCE: clicking noise on door hinge

there is a plastic piece that slides in the center of the door hing if you look close it will be broke or cracked in half. That is what is causing the noise.

Posted on Aug 19, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Nissan Civilian CO sensors


think this is about air quailty

cant find the listing for co sensors on the nissan civilain

these sensors fit the nissan interstar bus 2006

Sensors NISSAN INTERSTAR Bus X70 dCi 150 107 KW 145 PS from 2006 Electrics
26220085-rbhpigkjbg41n3t3ajiek4my-1-0.jpg

Jun 17, 2016 | Nissan Cars & Trucks

1 Answer

Nissan terstar dci 120 not starting flashing red stop light


no year, now that makes for a long story, huh?
what is a terstar?
you ment , INTERSTAR (so says google.)??????
a VAN.
ouch wiki is only in German....
2003-10 (transated)
Analogous to the revision of the Renault Master II / Opel Movano I also received the Interstar 2003 a revision of the body, engines and interior. Since then, an automated manual transmission (Interstar X70) was for the revised model now available and optional ESP (vehicle dynamics control) available. Also belonged from now a Brake Assist besides the previously installed anti-lock braking system standard on all models. Since then, the Interstar has been delivered as a minibus with up to 16 seats. 2010, the Interstar was replaced by the Nissan NV400.

NO START.
but to start any DIESEL engine,
IT MUST Crank first. does it?
if NOT, the the battery is dead, or bad. (or discharged)
DOes jumper cables used, (donor car) crank engine now?
if it DOES, crank, and robustly, then Id bet the glow plugs are bad.
if not glow plugs, lack of FUEL , ever change the filters per schedule>?

open glove box, extract the operators guide, I PROMISE
it tells you what the RED lamp means..
if lost , get one. from NISSAN , they are free.

Jul 04, 2014 | Cars & Trucks

1 Answer

My sliding door hinge broke


if it will go back in the track reinsert it in and slowly close the door..and dont use until a replacement hinge is gotten from the towyard...

Jan 21, 2013 | 2000 Nissan Quest

1 Answer

2001 honda passport front driver side door hinge is popping loudly when opening and closing, how do I repair it


You need to go to the nearest auto parts store like O'reilly and tell them you need a new door hinge pin for your car. The pin comes with llittle nit looking pieces. It is simple to put on but it will take time. But put the little pieces on top of the holes for the pin then slide the pin through the nuts and the problem should cease to exist.

Jan 17, 2013 | 2001 Honda Passport

1 Answer

My 2005 Quest has power side door problem.Opens fine but when closing it will only come about half way then go back to open. We have vaccumed @ wiped it all clean does not help.Keith


most commonly caused by binding hinges due to lack of lubrication.door has anti crush feature .unusually high amp draw caused by hinges is interpretted by controller as an obstuction in door and it reverses.lube hinges generously with rust penetrant and cycle door while doing so.takes some time but usually does the trick.

Jan 29, 2011 | 2006 Nissan Quest

1 Answer

Drivers side door will open but it is really hard to open it.


sounds like the door hinges may need some grease applied to them. open door and spray a teflon based lubricant onto hinges, move door back and forth and spray hinges one more time. if this does not free up the door then I would say that there may be a problem with the alignment of the hinges.

c...

Dec 31, 2010 | 2004 Nissan Altima

1 Answer

How to adjust passenger door on 95 nissan pathfinder?


Adjust it for what? I am gonna say that it is probably not striking the stiker latch dead center and is below it and when you close it it hits and you either have to hold up on the door or it hits low and then closes hard. Solution: the striker pin at he opposite side than the hinges is the rod that sticks out where the latch hits. It can be unloosened by a wrench or star wrench or allen wrench head depending on vehicle. Lossen it move it which way up or down till it latches good. this is a cure for bigger problem usually the hinges are worn and the door is dropping down (especially on long heavy car doors, usually 2 door versions) Check the hinges by lifting the door up at the entrance end if it lifts and drops sloppily on the hinge or moves on it without the entire care moving up and down it is worn. If you are actually adjusting the hinges. Try putting a long wobble head extention on a rachet or whatever allows access to the hinge bolts and put them in place and then close slowly and adjust till all body lines line up and door closes good without interference.( this can be a little tedious) use 2 people or 3 it really helps. If all this fails take it to a body shop and for a small fee they will do it in a few minutes.

Aug 14, 2009 | 1995 Nissan Pathfinder

2 Answers

How to adjust the passenger door on 95 nissan pathfinder


There are hing bolts to adjust the gap in the door on the top and bottom, loosen them and move the door into position and then close and make sure the gap is even all around. If the door is not latching properly then there are two star screws in the door jam you can loosen and move the latch hook out and tighten back down to get the door to latch tighter, however if the plastic is wore off the striker plate it needs to be replaced or it will rattle no matter what you do.

Aug 14, 2009 | 1995 Nissan Pathfinder

2 Answers

1995 Chevy suburban back door hinges too stiff


Lubricate the hinge or the hinge will have to be replaced.. I recommend wd40 first, then a finger tip amount of grease on top of hinge pin. the oil from the grease will keep the hinge constantly lubricated. It's not too late.

May 22, 2009 | 1995 Chevrolet Suburban

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

241 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...