Toyota previa, in reverse gear it wont move but if i rev it up then it starts slowly move, is this a transmission problem, do i need new one

6ya staff

• 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Download 6ya

6ya.com

Need repair answers fast Use 6ya to...

Posted on Jan 02, 2017

SOURCE: Transmission issue - almost no reverse & clacking

I had the same problem with my 1991 sv21 camry, it sounds like the reverse clutch is on its way. if you try to engine brake the car in 2nd or low gear does it hold, or slip?, if it slips then the box needs to come out and the cluch replaced, or is the fluid low? i had spent around $1500 Australian Dollars to fix the issue but with the 5sfe enging im aware that the whole engine and box assem, has to come out as well.

Posted on May 03, 2009

SOURCE: 1992 toyota 4 runner 4wd v6

There is an electronic module called ECT under the dash that controls the transmission ( a small computer), however if you had your vehicle serviced in the recent past the wiring connector (a 3 Pin connector) under the Drivers side (LHD) just before the T/case could have become loose or the wires broken, check this connector out.

Posted on Oct 17, 2008

Peter Castaldo

• 90 Answers

SOURCE: when driving (auto) in 2nd gear car jurks

If the transmission fluid was VERY low, the damage may already be done. I know on alot of Rav-4's, there is a computer problem, that causes transmission problems. basically, it wants to shift into 2 gears at once, and will eventually make the transmission come apart. BUT, it has to be replaced WITH the ECU because it will just break the new transmission. I would take it to your local Toyota dealer and have them check the ECM and transmission.

Posted on Feb 18, 2009

SOURCE: vault on automatic gear box on toyota estima enima

Normal reason for this because car is low on automatic transmisson fluid

Posted on Mar 03, 2009

Garagetuner1

• 1 Answer

SOURCE: 91 Toyota Previa AWD - Swap original engine for Previa Supercharged engine

I do a lot of work on Toyota Previa before; including rebuilt engine, swapping engine and transmission and lot of things in between, but never swap a normal aspirated engine to a supercharged engine or diesel. Since i have some experience in Previa, I would like to share my opinion with you regarding your plan to swapping the normal aspirated Previa engine to a Supercharged engine. When you do a swapp like that, you will not only be dealing with just swapping engine, but some wiring, computer, throttle body, air cleaner assembly, extra frame and pulley on the accessory items, transmission as well as a right rear end to get the correct gear ratio to accomodate the new engine and transmission. I can go on even more, but let me tell you this, beside less headache, it would definitely cheaper if you were to find a Supercharged Previa and fix it up. However, if you are totally motivated to do this project, keep in mind, this engine swap will be a long term and time consuming project.l I wish you best of luck and have fun!

Posted on Jan 17, 2010