Question about 2003 Ford Escape

Open Question

How to replace a serpentine belt on a 2003 ford escape

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 2 Answers

SOURCE: serpentine belt replacement

2.0L Engines
See Figures 11, 12 and 13
The accessory drive belt for 2.0L engines has no provision for manual belt adjustment, since these engines use an automatic belt tensioner. Drive belt slack is taken up by the automatic tensioner.
Movement of the automatic tensioner assembly during engine operation is not a sign of a malfunctioning tensioner. This movement is the tensioner self-adjusting and is required to maintain constant belt tension.
The belt tensioner has a belt length indicator. If the indicator marks are not between the MIN and MAX marks, the belt must be replaced.
0900c1528008d836.jpgFig. 11: Drive belt routing-2.0L SOHC engine with A/C 0900c1528008d837.jpgFig. 12: Drive belt routing-2.0L SOHC engine without A/C 0900c1528008d838.jpgFig. 13: Drive belt routing-2.0L DOHC engine

Posted on Oct 02, 2008

whitehorse02
  • 11 Answers

SOURCE: serpettine belt diagram

Google Image5def4ad.jpg

Posted on Oct 21, 2008

blueextc3221
  • 15935 Answers

SOURCE: need diagram of serpentine belt for 94Solution for "need diagram for replacing serpentine belt for 94 ford taurus gl w/3 0 v6 engine and a/c" ford taurus gl w/3.0 v6 engine and a/c

89beac5.gif Thanks for using FixYa - a FixYa rating is appreciated for answering your FREE question.

Posted on May 21, 2009

  • 6 Answers

SOURCE: headlight went out in 2003 ford escape i have

you have to remove the whole headlight assembly, then pop off the front cover pull the old bulb out and put the new one in. reverse the process to re-install. there is a small plastic tab on the topfront of the headlight assembly, that is what you need to release to get the clear cover off and get inside.

Posted on Oct 07, 2009

  • 1757 Answers

SOURCE: serpentine belt diagram

CLICK on the following LINK. It has the Belt Diagrams you will need.

If you would: Before Clicking: Let me know if this helped you, or if you have any additional information or questions. Feel Free to contact me at FixYa.com!
http://www.2carpros.com/car_repair_information/year/2002/make/ford/model/escape/2002_ford_escape_drive_belt_routing_diagram.htm

Posted on Mar 09, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2004 ford escape belt assembly


Most of the Fords I've owned including my 3 Escapes, have a diagram for the serpentine belt under the hood of the vehicle. Typically located on the frame above the radiator.

Jun 16, 2014 | 2004 Ford Escape

1 Answer

I need a serpentine belt diagram for a 2008 ford escape 3.0 v6


It is not that hard just remember to put the belt on where every pulley turns in the same direction .

Feb 18, 2014 | 2008 Ford Escape

1 Answer

How many belts does 2003 ford escape have


1 belt known as serpentine belt.

Feb 16, 2013 | 2003 Ford Escape

1 Answer

How do I remove an altinator from a 2004 ford escape.


Hello there,
To replace the alternator in your car:
Open the Escape's hood, and examine the belt-routing diagram on the fan shroud. This will show you the location of the alternator and the serpentine belt tensioner.
Pull the serpentine belt tensioner away from the serpentine belt with the serpentine belt tool far enough to allow you to dislodge the belt from the alternator pulley with your other hand.
Unplug the wiring harness from the back of the alternator by hand. Remove the ground harness from the alternator with the socket set.
Unbolt the alternator from the alternator bracket with your socket set. Lift the old alternator out of the bracket by hand.
Compare the old alternator to the replacement alternator before installing the replacement. Make sure they're both physically identical before continuing. If not, take them both to the parts store to match up a proper replacement.
Set the replacement alternator in the alternator bracket by hand. Bolt it in with the socket set. Plug the wiring harness in by hand and bolt the ground harness to the back of the alternator with the socket set.
Install the serpentine belt on the replacement alternator in reverse of how you removed it from the old alternator.
All the best. Elect_Comp

Sep 13, 2011 | 2004 Ford Escape

1 Answer

Need a diagram for a serpentine belt for a 2002 ford escape 24 v DOHC V6


I did find your manual but it did not detail the serpentine belt. Here it is just FYI.
2002 Ford Escape Owners Manual

Mar 28, 2011 | 2002 Ford Escape

1 Answer

I just went to my local Ford Dealership and asked them to replace my timing belt on my 2003 Ford Escape, V6. My receipt says I got a new serpentine belt. Is this related to the timing belt?


well, this part comes off to do the timing belt so if it was bad they should replace it but!!!!! not without your permisson first,just because its coming off doesnt mean they can replace it because its bad, they quote you a price they should stick to it, any extra cost would be nice to get your approval before installing more parts, hope this helps.

Feb 16, 2010 | 2003 Ford Escape

1 Answer

I need a diagram to replace the serpentine belt on a 2003 ford escape. There is no diagram under the hood... Please help!


My sincere apologies for the delayed response.
I am personally going back to answer your unanswered questions.

I do not know if you still need this information, but I am going ahead and answering it anyway. You may want to Print the Diagrams for future use.

CLICK
on the following LINK. It has the Belt Diagrams you will need.
If you would: Before Clicking: Let me know if this helped you, or if you have any additional information or questions. Feel Free to contact me at FixYa.com!
Again my apologies...
Thanks!
http://www.2carpros.com/car_repair_information/year/2003/make/ford/model/escape/2003_ford_escape_drive_belt_routing_diagram.htm

Feb 04, 2010 | 2003 Ford Escape

1 Answer

Can't get belt back on


AutoZone has diagrams of serpentine and accessory belt routing for your model here.

Mar 08, 2009 | 2002 Ford Escape

2 Answers

How do you change serpentine belt on a 2003 ford escape xlt 3.0L engine


Rotate the accessory drive belt tensioner (5)clockwise and remove the accessory drive belt.
207b6b6.gif

Mar 05, 2009 | 2003 Ford Escape

Not finding what you are looking for?
2003 Ford Escape Logo

Related Topics:

171 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5474 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...