Question about 2000 Ford Focus
Brake lights, signals, and hazard lights don't work
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
FIRST Check for Blown Fuse Then Locate Flasher Units @ Fuse Block to Determine Wiitch one is Hazard Turn On Key Then Turn Syg. Feel Flashers The One you feel Clicking is For Turn The Other IS Flasher Replace this Flasher unit.
Posted on Jun 01, 2009
I have a 2000 ford focus no brake lights. with the brake lights the transmission would not go into drive .replaced the brake light switch checked fuse replaced turn signal switch with no results then i moved onto the wiper switch and replaced it as much to my supp rise it fixed the problems
Posted on Aug 06, 2009
i work on plenty of police and non police crown vics(mostly 2003 and newer) but i am not 100% sure if this car has a LIGHTING CONTROL MOBULE. the newer ones do. this module controls the headlights,interior lights,turn signals.etc. it is a black box located above the brake pedal but off towards the pass. side.not far from the OBD connector.i wanna say it has 2 or 3 electrical plugs. it would also help if you get a WIRING DIAGRAM. i dont know how much they cost but maybe try swapping in a used or alot of times ive been able to open up the plastic "case" and look to see if anything on the circuit board looks burnt. let me know if this helps!
Posted on Sep 06, 2009
Testimonial: "yep...looks like I don't have a lighting control module at all...I have 3 connectors that are stuffed just above the gas pedal.:-( thanks 4 the help."
Sounds like the multifunction switch. Try working the hazard switch up and down a few times to see if you get some lights to work. If so then replace the switch.
Posted on Nov 09, 2009
Tips for a great answer:
Sep 30, 2015 | Cars & Trucks
Jul 11, 2012 | Ford Focus Cars & Trucks
Sep 22, 2011 | 1995 Ford F250
Sep 04, 2011 | 1981 Ford F 150
Aug 10, 2011 | 1997 Oldsmobile Bravada
May 14, 2011 | Chevrolet S 10 Cars & Trucks
Jun 18, 2009 | 2000 Ford Focus
Jun 02, 2009 | 2000 Ford Mustang
Dec 02, 2008 | 2000 Chevrolet Lumina
66 people viewed this question
Usually answered in minutes!