Question about 2003 Cadillac CTS
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
i do not know where it is but give these guys a try they sells only GM-parts only its Schram auto & truck parts 1-800-292-1032 and they website is www.schramauto.com if all fails stop by a cadillac dealership in the parts department and they be able to tell you sorry wasn't able to help you Michigan Man
Posted on May 09, 2009
ok cadillac for some reason has to be difficult about these things you actually have to take the whole tail light assembly out. . .here is what youre going to need:
1. socket wrench
2. number 10 socket (gm's nut of choice)
3. patience because it is easy to drop the nut be careful
ok so you have to open the trunk then take the plastic that holds the carpet down off. you do this by unscrewing the black screw on pegs (not sure what to call these things). after you do this pull the plastic thing hard because it is being held in place by some pegs other than the ones you have already removed. then remove all the side carpeting depending on which side youre changing. ok after this look directly behind the tail light assembly for 2-3 (i forget how many) bolt like pegs (my new favorite word) these are attached to the plastic tail light assembly. then take the nuts off of these pegs and then you should be able to tug the assembly off. then you do what the others say take out the socket and replace the bulb.
like i said cadillac makes **** hard to do. if you hate this wait til you have to take the whole bumper off to replace the headlight bulbs (might want to invest in some hid lights so you wont ever have to replace them)
Posted on Jul 26, 2009
drain the coolant.remove belt by rotating belt tensioner cllockwise. water pump pulley will require a holding tool to keep it from turning while removing bolts. access to air ratchet can sometimes eliminate the need to hold but be careful cause thats a good way to skin some knuckles. also make installation more difficult to obtain proper torque. after pulley is off just a few water pupm mounting bolts remain. clean and dry gasket surface very well before reinstalling.
Posted on Nov 07, 2009
Testimonial: "Very quick with a response, and good info!"
My 2003 CTS would not start on the first, second or third try after filling the gas tank. Finally after several months of this occuring every two weeks a check engine light came on. It was the evac purge valve. Tom
Posted on Jan 08, 2010
Tips for a great answer:
Feb 21, 2015 | 2005 Cadillac CTS
Feb 24, 2014 | 2005 Cadillac CTS
Jan 14, 2011 | 2005 Cadillac CTS
Oct 01, 2009 | 2005 Cadillac CTS
Aug 10, 2009 | 2005 Cadillac CTS
Mar 20, 2009 | 2004 Cadillac CTS
Mar 15, 2009 | 2005 Cadillac CTS
Mar 01, 2009 | 2005 Cadillac CTS
73 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: