Question about Cars & Trucks
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
The 5.9L diesel engine accessory drive system (with a/c) consists of :
1. Position drive belt over all pulleys except water pump pulley. 2. Attach a 1/2 inch ratchet to tensioner.
The 5.9L diesel engine accessory drive system (without a/c) consists of :
Posted on Jan 22, 2009
no you should be able to do it There should be a routing label on the underside of hood or on the radiator support/ Its should not be very hard if you have one already just loosen the Alternator it will slide down get the other one ready look to see the way its routed then slide the new one and tighten up the alternator thats it/ Please rate my response thank you very much
Posted on Jan 31, 2009
Looking at the engine from front (right side of the Van): Stating at the Top, Going Left to Right and Clockwise:
Over the Alternator
To under the Idle Pulley,
To Over the AC Compressor.
To the Left Side of the Water Pump.
To the Right side and Under the Crankshaft Pulley
To the Right side and Over and Down the Tensioner
To Under the Power Steering Pump
And Back up-to the Left side of the Alternator.
Advise when puting it on:
Put the Belt around everything else accept for the Alternator. After it is around all the rest of the Pulleys - Pull the belt up - tight from the Power steering Pump and the Idle Pulley to form a loop, holding the Belt close to the Altenator Pulley.
Using the 15mm wrench or belt tensioner bar - rotate the Tensioner Pulley towards the front of the Van and then place the belt over the Alternator.
Let me know if this helped or if you have additional information or questions. Feel free to contact me at FixYa.com!
Posted on Jan 22, 2010
DRIVE BELT DECAL SHOULD BE UNDER THE HOOD.OR YOU CAN GO TO DEALERSHIP GET ONE AUTO ZONE OR ADVANCE AUTO PARTS CAN GET YOU ONE.OR YOU CAN BUY A HAYNES REPAIR MANUAL IT HAS BELT DIAGRAM.
Posted on Mar 10, 2010
Tips for a great answer:
Mar 14, 2017 | 2007 Dodge Ram Pickup 3500
Jun 18, 2016 | Dodge Cars & Trucks
Jan 01, 2016 | Dodge Cars & Trucks
Dec 02, 2015 | Dodge Cars & Trucks
Sep 27, 2014 | 2011 Dodge Ram 3500
Jan 01, 2011 | 2008 Dodge Ram 3500
Jul 27, 2010 | 2004 Dodge Ram 3500 Truck
Jul 08, 2010 | 2005 Dodge Ram 3500
Mar 09, 2010 | 2004 Dodge Ram 3500 Truck
May 28, 2009 | 2007 Dodge Ram Truck
Aug 22, 2017 | Dodge Cars & Trucks
26 people viewed this question
Usually answered in minutes!