Question about 2000 Ford F350 Super Duty Super Cab

Open Question

I put transmission range sensor in a f350 ford and now it will not shift

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
alicantecoli
  • 22246 Answers

SOURCE: 98 ford escort

check the oil level in the transmission

Posted on Nov 04, 2008

Ad
gypsycat00
  • 224 Answers

SOURCE: 1996 ford contour transmission range sensor

Transmission range sensor and neutral safety switch are the same thing (when you go to buy the part). It's at the top of your transmission. You'll see the shifting cable connected to it. Here are the instructions for adjustment:
Shift Control Linkage
The transmission shift linkage adjustments must be performed in the order in which they appear.

Column Shift

Place transaxle range selector lever in (D) (OVERDRIVE) position or D (DRIVE) position on vehicles equipped with a transmission control switch (TCS). A weight of 1.4 kg (3 lb) should be hung on the transaxle range selector lever to ensure the lever is located firmly on the (D) (OVERDRIVE) or D (DRIVE) position on vehicles equipped with a transmission control switch (TCS) detent.

Loosen manual control lever-to-control cable retaining nut.

Move transaxle manual control lever to OVERDRIVE position or D (DRIVE) position on vehicles equipped with a transmission control switch (TCS), second detent from most rearward position.

Tighten retaining nut to 17-23 Nm (13-17 lb-ft). Check operation of transaxle in each transmission range position. Make sure that park mechanism and transmission range (TR) sensor are functioning properly.

Floor Shift

Position transaxle range selector lever in DRIVE position against rearward stop. The floor transaxle range selector lever must be held in the rearward position using a constant force of 1.4 kg (3 lb) while linkage is being adjusted.

Loosen manual control lever-to-control cable retaining nut.

Move transaxle manual control lever to DRIVE position, second detent from most rearward position.

Tighten retaining nut to 17-23 Nm (13-17 lb-ft).

Check operation of transaxle in each transmission range position. Make sure that park mechanism and transmission range (TR) sensor are functioning properly.



To take it off, it's a couple of retaining bolts and a wiring harness.

Posted on Jun 29, 2009

  • 115 Answers

SOURCE: 1999 ford f350 engine code P0705 transmission range sensor warnin

This switch is also known as the neutral safety switch.

Posted on Jul 09, 2009

oldfishead
  • 155 Answers

SOURCE: 2003 FORD F350 6.0 DIESEL NO CRANK TRANS RANGE

researching your problem back soon....

Posted on Jul 10, 2009

  • 2 Answers

SOURCE: where and how do you put a cam sensor on a Ford

Camshaft Position Sensor located above front crankshaft pulley. Use 10mm socket on 1/4" drive ratchet. Crawl under front of vehicle, disconnect electrical lead, remove bolt, clean timing chain cover area, install new CPS. About $27 at Ford dealer. On some years this is covered under a recent RECALL by Ford...after years of litigation.

Posted on Sep 15, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Location of speed sensor


Vehicle Speed Sensor Removal & Installation - YouTube

? 8:47
www.youtube.com/watch?v=rAenb7qb3BY
Jul 4, 2012 - Uploaded by TheYoshiClan Speed Sensor Replacment Fix Transmission Shifting Problems ...10 Min Automatic Transmission Fluid Flush + Replacement (Most

Sep 16, 2015 | 2004 Ford F350

2 Answers

Transmission range sensor circuit


No you won't need to replace the transmission the Digital Transmission Range Sensor isn't inside of the transmission and can be replaced fairly easily.

Here is a link to the instruction for the replacement

How to replace a DTR sensor

Oct 16, 2013 | Ford Explorer Cars & Trucks

1 Answer

1995 f350 powerstroke wont start one other time had to drop shifter and put back to park before it started now it wont start the lights elect windows and glow plug cycles but no clicking noise just nothing


replace the transmission range sensor. Adjust the new sensor by loosening the bolts slightly, turning the key on, putting the truck in reverse, and turning until reverse light come on.

there are 2 possible sensors, depending on which transmission you have.

jturcotte_2379.gif

jturcotte_2380.gif

Oct 06, 2011 | 1995 Ford F350

1 Answer

My 1997 Ford F-350 truck won't shift from park to drive, and 'ABC' is lit up in yellow on the dashboard. What does 'ABC' mean on the dashboard of a ford f350?


I have never heard of a ABC light on any ford truck what I think you mean is the ABS. To repair the ABS light you need a diagnostic computer to pull the code find the sensor that is bad and replace it. More than likley it is one of the speed sensors on the wheels, you have one for each wheel. That will fix the ABS light now not able to shift it out of park, they utilize a cable on the shifter. The cable itself may be frozen so bad to the point where it wont shift at all. What I would do to varify that is first block wheels so the truck wont roll, unhook cable down at transmission than see if still wont shift or is very difficult to shift, if so replace cable and you should be all set.

Feb 08, 2011 | 1997 Ford F350 Crew Cab

1 Answer

I have a 2002 f350 superduty 4x4 crew cab with an automatic trans. Where is the transmission range sensor located?


It's on the side of the transmission. drivers side. Once you get under the truck you will see the shift cable going to the transmission. the range sensor is mounted on the transmission under the cable arm. easy to replace.

Feb 06, 2011 | 2002 Ford F350 Super Duty DRW Reg. Cab

1 Answer

2001 F350 SUPER DUTY; I ran my transmission about a quart low on transmission fluid. It ocaisionly shifts from 1st to 2nd irregularly and slips in 2nd. I can stop then start again and it shifts normaly.


Replace the transmission filter. If transmission still acts up some trash may have penetrated the filter and be causing a shift valve to stick. A teardown and rebuild may be necessary.




































Jul 22, 2010 | 2001 Ford F350 Super Duty SuperCab

1 Answer

I have a 96 ford f350 with a 7.3 diesel. The


You may have spun the speedometer cable gear off in the transmission. Try replacing the speedometer cable.

Jul 10, 2010 | 1993 Ford F350

1 Answer

My f350 transmission will not shift unless you


check transmission fluid level.if level okay.look at tranny fluid.if it look dark and smell real bad change filter and fluid.

Jul 06, 2009 | 1987 Ford F 350

1 Answer

1996 ford contour transmission range sensor


Transmission range sensor and neutral safety switch are the same thing (when you go to buy the part). It's at the top of your transmission. You'll see the shifting cable connected to it. Here are the instructions for adjustment:
Shift Control Linkage
The transmission shift linkage adjustments must be performed in the order in which they appear.

Column Shift

Place transaxle range selector lever in (D) (OVERDRIVE) position or D (DRIVE) position on vehicles equipped with a transmission control switch (TCS). A weight of 1.4 kg (3 lb) should be hung on the transaxle range selector lever to ensure the lever is located firmly on the (D) (OVERDRIVE) or D (DRIVE) position on vehicles equipped with a transmission control switch (TCS) detent.

Loosen manual control lever-to-control cable retaining nut.

Move transaxle manual control lever to OVERDRIVE position or D (DRIVE) position on vehicles equipped with a transmission control switch (TCS), second detent from most rearward position.

Tighten retaining nut to 17-23 Nm (13-17 lb-ft). Check operation of transaxle in each transmission range position. Make sure that park mechanism and transmission range (TR) sensor are functioning properly.

Floor Shift

Position transaxle range selector lever in DRIVE position against rearward stop. The floor transaxle range selector lever must be held in the rearward position using a constant force of 1.4 kg (3 lb) while linkage is being adjusted.

Loosen manual control lever-to-control cable retaining nut.

Move transaxle manual control lever to DRIVE position, second detent from most rearward position.

Tighten retaining nut to 17-23 Nm (13-17 lb-ft).

Check operation of transaxle in each transmission range position. Make sure that park mechanism and transmission range (TR) sensor are functioning properly.



To take it off, it's a couple of retaining bolts and a wiring harness.

Jun 28, 2009 | 2000 Ford Contour

2 Answers

1999 ford f350 engine code P0705 transmission range sensor warnin


P0705 - Trans Range Switch Circuit

Get under the truck and look where the trans shift linkage connects to the trans, there is a post that comes out of the trans, on that post u will see a large switch with multipile wires connected to it, that is the range selector switch, you need to remove the shift arm and a couple of bolts to remove the range switch, it is adjustable, u will see the slots, make sure u put the new switch in the same position as the old one or the truck may not start.

Jan 05, 2009 | 2008 Ford F-350

Not finding what you are looking for?
2000 Ford F350 Super Duty Super Cab Logo

Related Topics:

508 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

fordexpert

Level 3 Expert

5546 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...