Question about Cars & Trucks

1 Answer

No heat 03 stratus chgd therm stat and anti-freeze. have read about blend actuator.Where is it located?

Posted by on

  • carhodge
    carhodge Apr 03, 2012

    looks like I forgot,but the problem has been fixed thanks all.

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,212 Answers

That would be on passenger side. If your heat adjustment knob is a mechanical connection, it is likely the outer jacket slipped out of it holder. If it is vacuum actuated, there will be a small vacuum servo on the plenum that controls that position. The hose may be pinched.

You may also have air trapped in the heater core. When the engine is warm- check the heater hoses to see if they are both evenly warm- if not purge the air out of the system. Difficult to remove air bubbles can be removed by installing a flushing tee in the upper hose at a point where you can raise the hose above the highest point of the engine. and when warm, carefully cracking it open to let air out of system until only coolant escapes.

Posted on Feb 15, 2012

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 50 Answers

SOURCE: A/C and Heater Blend Door Actuator

location is on ac and heater box under dash.Good luck big jab to fix it.

Posted on Mar 13, 2009

harley9701ha
  • 424 Answers

SOURCE: cant find the blend door actuator on 2003 ford f150 super crew

The temperature blend door actuator is located on the right side of the transmission hump under the evap. case. The floor ducts cover it.

Posted on Jun 22, 2009

RonPark
  • 855 Answers

SOURCE: no heat in the passenger compartment its not the

If the thermostat and heater control valve (not the door actuator) are good. Ypu woulwant to check that the heater core is not clogged. The heater control valve is a valve in line with one of the heater hoses which allows flow or no flow to the heater core. You need to check that when temperture is on hot the hose is hot on both sides of the valve. If the valve doesn't work you will not get ant heat.

Posted on Oct 10, 2009

roniecon
  • 6826 Answers

SOURCE: need to locate blend door actuator on 2002 ford

Open the glove box,and look on top of ac/heater box toward the center of vehicle,it should be setting right there.

Posted on Oct 10, 2009

  • 236 Answers

SOURCE: Where is the blend door actuator located? Is it a

buried in the dash, about an 8 hour job.

Posted on Oct 13, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Location of passenger side blend door actuator on 2006 mercury mountaineer auto controls, 6 cylinder


Temperature Blend Door Actuator - RH, EATC Removal and Installation
  1. Remove the RH floor console finish panel.
  1. Lower the glove compartment.
  1. Disconnect the RH temperature blend door actuator electrical connector.
  2. Remove the 3 RH temperature blend door actuator screws.
    1. Remove the RH temperature blend door actuator.
2006 2010 Ford Explorer NO Heat Passenger Temp Actuator Replacement same as mountaineer

Jun 19, 2017 | Mercury Cars & Trucks

2 Answers

1998 Dodge Stratus - Air conditioning is blowing through the defrost vents


Vacuum controls this circuit and leaks will cause blend air door to default to defrost. Check for bad check valve or hose leaks under hood first as these are the easy ones to get at and under hood heat causes deterioration.

Jul 08, 2015 | 1998 Dodge Stratus

1 Answer

How do i fix a stuck blend door on 2010 dodge nitro?


I would pull off the blend door actuator and swap it out with a new one. Or another option is to swap it out with one of the other actuators. The blend door actuator is interchangeable with the actuators for the mode-air doors and the recirculation-air door.

Disconnect and isolate the negative battery cable.

If equipped, remove the silencer from below the driver side of the instrument panel.

Disconnect the wire harness connector from the blend door actuator located on the driver side of the air distribution housing.

Remove the two screws that secure the blend door actuator to the actuator mounting bracket and remove the actuator

Feb 17, 2015 | 2010 Dodge Nitro

2 Answers

Where is the blend door actuator located on 03 Hummer h2. Driver side blows cold, passenger side blows hot


They are not vac on the h2. there is 2 for temp control, one for recirc and one for blend. check the hummer forum as there is a great read for it there. the driver side actuator is really ez as it's under the glovebox, 20 min fix. the rest take removing the whole dash but it's not that tough.

Jan 10, 2012 | 2003 Hummer H2

1 Answer

1999 ford taurus no heat blowing out of vents cool air blows out has a new t-stat ,antifreeze is fine,


Hi Ron,

Blend air door actuators fail often in Ford Taurus. It sounds like that may be the problem with yours. For more information regarding this subject, please read the following article:

Why Is My Hater Cold?

Dec 27, 2011 | 1999 Ford Taurus

1 Answer

No heat Heater core is hot


If heater core is getting coolant circulating through it then you may have a temp blend door, or blend door actuator not working properly. The blend door is located in the air box under the dash, and the actuator is located on the air box. You may be able to visually check the operation while turning the temp knob, by locating the coresponding actuator on the air box and monitoring the movement. If it is moving ok and still no heat then the blend door, or lever is broken, which will require removal of the dash.

Oct 17, 2009 | 2001 Dodge Ram 2500 Truck

1 Answer

No heat in the passenger compartment its not the stat not the blend door actuator not the anti freeze level and the sensing valve I got from auto zone looks like nothing under my hood help


If the thermostat and heater control valve (not the door actuator) are good. Ypu woulwant to check that the heater core is not clogged. The heater control valve is a valve in line with one of the heater hoses which allows flow or no flow to the heater core. You need to check that when temperture is on hot the hose is hot on both sides of the valve. If the valve doesn't work you will not get ant heat.

Oct 10, 2009 | 1999 Ford Taurus

4 Answers

I have a 2000 ford windstar no heat still


My 99 windstar did this too. It was the blend door that the actuator motor goes into was broke. When you pull the actuator out look into the hole and see if you see a d shape piece coming out of the box if it is not d shape it is broke check out this site great photos

Feb 27, 2009 | 2000 Ford Windstar

1 Answer

Air lock in Madza 626 2L


I took thermal stat off car again,place it in hot water till the stat open(to see if working).Place stat back in and not put the housing back on,disconnect the top hose,pored anti freeze into hose.Anti freeze started to drip out of thermal stat,as I was filling head the air was being pushed out.I could hear like a whistle,when whistle sound stopped put thermal stat housing on,hooked hoses up.did not over heat and have heat in my car now

Jan 05, 2009 | 1998 Mazda 626

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

33 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...