Question about 1992 Lincoln Town Car
No tails is switch ,,, no brakes is switch ,, i think ,,,, but you need to trace it using a test light
Posted on Feb 15, 2012
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: 1998 Lincoln Town Car
If your main brake lights are not working and the third light in the back window is working
it is the turn signal switch on the column cost about 150 to have replaced
Posted on Aug 30, 2008
check the outputs on the multi function switch (t/s switch) the brake lights and flashers all go threw this switch try to wiggle the flasher button if the lights start to work then the switch is bad to replace switch remove bottom cover by pedals if it has one bottom cover on steering colum has i beleave 4 screws that hold it on, the tilt colum lever unthreads and the cover will come off the upper colum just clips on you will have to remove the key tumbler to get it off . you need to disconnect the battery at this point and block the wheels. to get tumbler out put key in and turn to run postion there is a small silver button that pushes in with small screwdriver once its pushed in use the key to pull tumbler out the top cover will now come off you will probably have to tilt colum down and shift to 1 to get cover off there are 2 torx head screws that hold switch on plug new switch in and reconnect battery to test lights unhook battery again and reassemble please let me know how you make out
Posted on May 22, 2009
The airbag module is located behind the glovebox, once the glove box is removed it will be on the right hand side, it is blue in color.
Posted on Oct 22, 2009
Remove the Negative Earth Lead to make sure no one can start the engine on you be best start.
Remove the Air that goes into the top of the engine a bolt holds it in place near the butterfly and the tube to the Air filter housing.
Put a 3/4 Wrench into the Tensioner you'll find a cut out square where it fits perfectly into. Push forward if i recall correctly to release the tension on the Serpentine belt and with your spare hand remove the belt from the Alternator.
Unbolt the 2 bolts of the top. remove the pluged in connections. and replace!
Enjoy doing it and becareful to make sure you put the Belt back on correctly and make sure its sat in the other pulleys correctly!
Posted on Oct 26, 2009
Tips for a great answer:
Nov 02, 2013 | 1996 Lincoln Town Car
Feb 19, 2013 | Cars & Trucks
Sep 21, 2012 | 1998 Lincoln Town Car
Apr 18, 2009 | 1988 Mazda 323 Hatchback
Mar 20, 2009 | 1987 Jeep Wrangler
Feb 25, 2009 | 1991 Lincoln Town Car
Jan 28, 2009 | 1999 Lincoln Town Car
Jan 10, 2017 | 1992 Lincoln Town Car
304 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: