Question about 2010 Toyota Yaris

1 Answer

I was driving and my check engine and p/s light came on and I lost the power steering on my yaris 3 door 2010 I just installed a power windos kit and I guess the prooblem is electrical but I cannot find a fuse for power steering pump. Can anybody give me alternatives

Posted by on

  • miguelloz816 Feb 17, 2012

    I replied to the expert and thanked him for his assistance. The yes button will not work on my cel. It was very helpful. Thanks



1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert that has over 500 points.

  • Expert
  • 202 Answers

Check where you took the power source,,, sounds like wrong place

Posted on Feb 15, 2012

Testimonial: "Thanks for your suggestion. I was thinking that it had something to do with it. I was using a free plug but I guess I was wrong. Althought the plug was not in use before I used it. The power steering was somehow connected to it. Anyway I found the burned fuse in the fuse box under the dash board directly under the steering wheel and was marked as ECU power if I read it correctly. Thank You for your help."


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

What does it mean when my 2010 camaro has no power steering

2010 Camaro Power Steering Failure

It means the power steering pump is no longer operating and so providing the required power assistance.
You either have a power steering fluid leak in the system and much of the fluid has been lost or the power steering pump itself has failed. You should not try and drive the car when you have this problem because the steering will be far too heavy to drive safely and because if a fluid leak has run the pump nearly dry you will cause damage to the PS pump.

The first thing to do is check the power steering fluid reservoir in the engine compartment. If it is low or empty you have a leak in the system. You can refill the system with new fluid but it will continue to leak until the leak is addressed and you will have to constantly add new PS fluid. In the case of a major leak the car will not be driveable as the PS fluid will be lost very rapidly. Without fluid you will quickly ruin the pump and you will also have no power assistance in your steering.

Feb 16, 2015 | Cars & Trucks

1 Answer

How do I reset toyota yaris 2010 2 door engine immobilizer

Please hook up the scan tool, pull out the error code number/ numbers and post them here.
Dealing with the engine immobilizers is a big deal and requires the proper equipment and knowledge. But again nothing could be done without knowing about the error codes.

Feb 11, 2015 | 2010 Toyota Yaris

1 Answer

2010 Mazda 3 power steering quit working, warning light came on

Most likely you have power assist. Either the pack and pinion died, or you lost power and /or ground to it.

Dec 06, 2014 | 2010 Mazda MAZDA3

1 Answer

Recently purchased a Toyota Yaris 2010 1.3 Engine shuts down periodically ...P/S light come on. Car shuts down ...takes another 10 minutes then starts up via ignition

Electric motor power steering is notoriously unreliable , even on newer car's , found that Toyota has a recall on some vehicles of the year , follow this link to check if your vehicle is affected
Toyota announces recall of some Yaris and Verso models for power steering...

Nov 07, 2014 | 2010 Toyota Yaris

1 Answer

Power steering

P/s light? (are all fan belts good?)
do head lights glow bright on demand?
do all dash cluster lamps glow, key on,? and the CEL lamp???????
then the CEL goes out when engine starts and runs??? says out>?????
the engine is stalling. does it stall hot and cold engine?

there are 50 causes for that.
and 4 major systems to test. do you have tools. an meters and gauges to check engines.? if not get a mech, that has that
if you want to DIY , then get the tools.
ill list the 4 systems. (not each test)
1: 12vdc power to the whole EFI system.
2: good compression
3: lost spark.
4: bad fueling

there are test to find the 4 paths. #1 is easy a voltmeter will tell you good or bad.
check all fuse first. as always,

Jan 31, 2014 | 2007 Toyota Yaris

1 Answer

Toyota yaris power steering problem

It usually happens immediately after replacing the battery. Check and delete the power steering codes with scan tool.

Sep 19, 2012 | 2007 Toyota Yaris

2 Answers

Power steering and dashboard power goes out intermittantly

check for a loose ground or harness conection

Jul 07, 2009 | 2007 Toyota Yaris

Not finding what you are looking for?
2010 Toyota Yaris Logo

Related Topics:

500 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts


Level 3 Expert

80608 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8841 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides