Question about 2005 Mazda MX3

Open Question

Mx 3 immobiliser resetting

Replaced battery on my MX3 now It won't start and the alarm goes off, anyone know the reset sequence, it has a push button fob and one you have to position near the stearing column    HELP

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 89 Answers

SOURCE: Immobiliser problem - 94' Golf Mk3 GTI 2lt 8 valve

just unplug the immobiliser unit. its behind the glove compartment for rhd models.

Posted on Mar 18, 2009

Ad
  • 170 Answers

SOURCE: Mazda mx3 wont start

VSS or vehicle speed sensor aka cam sensor or crank position sensor. Test the battery and alternator. You should also check for blown fuses, bad wires and grounds on a car as old as yours. If you find it's getting spark and fuel after further testing, check the timing belt. It could have slipped or broke even if it was changed recently so either pull off the cover or at least do a compression test.

Posted on Apr 16, 2009

  • 18 Answers

SOURCE: how do I remove the nearside headlight unit on my MX3

first remove the 3 screws linking the metal bracket to the headlight, the the 2 bolts on top, and the last bolt inside the bumper, you will need a flashlight to see, it's not easy to find

good luck

Posted on Jun 16, 2009

pippall
  • 1486 Answers

SOURCE: immobiliser on mercedes a class will not switch

The fob and car have to go to the dealer to have it reprogramed.

Posted on Sep 16, 2009

  • 347 Answers

SOURCE: After having replacement battery fitted, my

disconnect the immobilizer

Posted on Oct 02, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I reset my aftermarket alarm it's a viper alarm model 7284V the battery died in the key fob so I took them out and the buttons got pushed so it decoded itself And my wife some how got the alarm


Put new batteries into the fob.
Switch the ignition on and off several times.

Then leave the ignition switched on for 5 minutes.

The fob may well reprogram itself

Feb 17, 2016 | Cars & Trucks

1 Answer

Alarm wont set 2008 jeep commander


the car came with 2 RKE FOBs
are both dead.?
alway have 3 FOB if not you can not reprogram a new one. self.
can cost you $300 for more to tow your car to the dealer if the 1 fob dies. never run one fob. or bad happens.
put in a new battery in the FOB for door issues
the transponder part does not use the battery .
the transponder must be good, or the car would never run.
the jeep cuts fuel after 2 seconds if the transponder fails.

Apr 20, 2014 | 2008 Jeep Commander Sport

1 Answer

Key fob wont re set on my ssan yan rexton


I recently changed the battery on my key fob for my ssanyong rexton. I then did the following for the key fob to make it work. 1. Enter vehicle and close all doors.

2. Put seatbelt on (or clip it into the buckle) to shut the warning buzzer off.

3. Put key in ignition, turn to run position but don't start it.

4. Press and hold both buttons on key fob until red light on fob stays on. Then let go of both buttons. Then pressed the alarm button then the panic button, somthing like that. To be fair the button sequence after the red light came on is a bit vague. The alarm was blaring so i was happy when it just stopped.

May 23, 2012 | SsangYong Rexton Cars & Trucks

2 Answers

2003 Monte Carlo SS, FOBS won't unlock doors (new batterries), use key and open the door with the door open FOB will lock and unlock the door, shut the door and the FOB won't lock the doors. After...


If the passkey is messed up, there will be a light on the dash that says security, or have a picture of a car with a lock thru it. If there is no light when the key is turned forward, then its NOT a passkey problem.



tayjoejoe_35.jpgtayjoejoe_36.jpg

Aug 17, 2011 | 2003 Chevrolet Monte Carlo

1 Answer

WHEN I PUSH TO BUTTON TO UNLOCK MY 2007 HYUNDAI VERACRUZ LIMITED, IT UNLOCKS OK BUT THEN WHEN I OPEN THE DOOR THE ALARM SOUNDS UNTIL I TURN THE IGNITION SWITCH. AFTER THAT, EVERYTHING OPERATES NORMALLY. ...


the car has two codes one is fixed the other is a rolling code which changes each time you press the unlock button,the first is allowing you to unlock the car but when you open the door it thinks your trying to steal it and the alarm goes off,then when you put in key it is recognising the key and switching off the alarm....NOW if you follow the instructions in the book you can reset the alarm(as i worked for hyundai over 5 years ago i cant remember the sequence,sorry)

Aug 21, 2010 | 2007 Hyundai Veracruz SE

1 Answer

Almost every 2 hours the alarm beeps 6 times quickly, how do I stop this?


put the key into the ign or drivers door and push and hold any button for 10 seconds this should reset the alarm system..have you replaced the fob batterys latly,if all fails then the alarm is oversenitave and needs reset by a dealer.adrian,,,,,,,,

Aug 17, 2010 | Dodge Intrepid Cars & Trucks

1 Answer

Replaced starter on '99 Yukon. When reconnected


I can't say for sure but it sound like you either trigger the "Panic" button or alarm system if equiped. Hook the battery up (negative last) and push the "Panic" button on the key FOB.
If you don't have the FOB you may be able to reset but disconnecting the negative cable only.
If it's an alarm system, locking and then unlocking with the FOB should reset it, also using the key to turn on the ignition is supposed to reset it.

Jun 06, 2010 | 1999 GMC Yukon

1 Answer

I disconnected the battery to clean the posts, and the alarm kept going off. I pushed the "unlock" button to turn it off, which happened several times. The truck started thereafter, and again this morning,...


your alarm is the problem, if you do not have the fob for it, then get it removed. otherwise if you really want to start the motor, you will have to use a remote start button every single time until you get the fob problem addressed

Jan 18, 2010 | 2001 Toyota Tundra

1 Answer

2004 Sonata Alarm


Yes!... reset the alarm with the fob!

Aug 02, 2009 | 2005 Hyundai Sonata

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

188 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

77194 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8743 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...