Question about 2008 Chevrolet Equinox

2 Answers

Brake light driver's side burns out at least every 3or4 months

Tried two different bulbs just the brake goes out

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 54 Answers

Check the bulb socket for a white grease. if there is none or very little add some dielectric grease to the socket and re install bulb. some vehicles, like a PT Cruiser, tend to burn up alot of lights for no apparent reason.

Posted on Feb 15, 2012

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 202 Answers

Bad earths or poor connections ''''

Posted on Feb 15, 2012

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 44 Answers

SOURCE: I have a 1996 Chevy

Check the ground wire coming out of the plug to make sure it is grounded properly on that side.

Posted on May 12, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Bright filament on brake light not working


Try a different bulb. The high filament can burn out even if the low one works.

Sep 15, 2013 | Land Rover LR3 Cars & Trucks

1 Answer

Driver side blinker goes double time when headlights are on and all the bulbs in the rear flash at a different time. When the brake pedal is pressed driver side brake light goes out and both reverse l


You have a broken Ground wire From Body to Frame . You Should Have a Heavy Braided Ground wire From Engine Block to Frame on Pass side, Then You will have another one that goes from firewall to engine , like at the back of the Head on passenger side to a screw to firewall.,....One of these is Broken,Loose, Corroded.

Feb 29, 2012 | 1998 Chevrolet K2500

1 Answer

I would like a diagram of the 740 gle 1990 tail light wiring, I cannot seem to get them working correctly


You don't really need a diagram, it's simple. If you open both tail light boxes in the trunk you will see at the connector on the bottom a yellow wire in the first position. That goes to the brake bulb. If both tail lights do not work, make sure you are getting power to the driver side light first, if it is not getting power, the passenger side will not work either, they are in line with each other. If it is only the passenger side not working, the bridging wire could be bad.. try jumping it. Also, make sure you are getting power inside the tail light bulb holder. The metal connections can come loose. If there is no power to the driver side tail light it could be the bulb failure relay, that is the round red relay in the rear left side of the fuse box behind the ash tray/ cigarette lighter below the radio in front of the shifter. You should be getting power to the third brake light in the rear window...that is a different circuit and will not be affected. Try changing out the bulb failure relay, it supplies the power to the tail lights.

Jun 22, 2011 | 1990 Volvo 740

1 Answer

Bulb has been replaced...tail light and brake lights work on driver's side but only tail lights work on passenger side. when the brake is pushed that light goes completely out.


It sounds like a ground wire problem. Try to trace the ground wire from the passenger side. Look for a broken wire or a corroded ground connection.

Jun 01, 2011 | Toyota Celica Cars & Trucks

1 Answer

Regular lights work but when u press brake only passenger brake light goes on, i changed the brake bulb which was bad but still no brake light when pushing brake on driver side


sounds like you have a short in the drivers side brake light. it may be due to corrosion in the bulb inlet.try cleaning the bulb socket itself with wd40 or add bulb grease to the bulb. you may have a broken wire to it also.check with a test light to confirm you have power to the bulb when brakes applied,this will take 2 people 1 to press brakes and1 to check for current with a test light at the tail light itself. you may only have corrosion in the brake light bulb socket,so,,do this 1st. with lights off,, remove the bulb on driversside, add a little bulb grease to your bulb,insert it into the bulb socket,and then remove the bulb again,do this 3 times,make sure the bulbs getting connection. then apply the brakes and see if the light comes on. thank you for choosing fixya.com

Feb 27, 2011 | Dodge Sprinter Cars & Trucks

2 Answers

Left blinker flash fast, hit brake left blinker goes out left taillight goes out but both backup lights come on


Usually a fast flashing signal is because one of the bulbs is burned out or shorted out. If the signal and brakes use the same light which many cars do then check the wiring to it and replace bulb. If burns out again then it has a short between the signal switch and the actual light or the brake wiring to it is shorted.

Sep 03, 2010 | 1999 Chevrolet Silverado 1500

1 Answer

Brake light goes out when headlights are turned


there a e few different bulbs that look the same but are in fact different. go to your local parts store and they will be able to give you the correct bulb part number for the bulb. check that first to see if that helps.

Feb 17, 2010 | 2000 Jeep Grand Cherokee

1 Answer

My driver and passenger side brake lights are not working but the center brake light on the rear door works fine. The fuses and bulbs seem to be fine. Any ideas?


I would try changing the bulbs even if they seem fine. Usually when bulbs burn out both sides go at the same time.

Aug 21, 2009 | 2004 Dodge Durango

Not finding what you are looking for?
Cars & Trucks Logo

145 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...