Question about 2002 Lincoln Continental
My interior lights always stay on inside
It's bad keypad, the keypad light is on by itself then trigger the interim lights. it used to happen due to the bad /cold/rain weather. all you need to do is disable it (unplug the wire at the door penal) or replace the new keypad. I did mine.
Posted on Dec 27, 2014
Faulty dooor switch ,,,, swop left to right
Posted on Feb 15, 2012
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
pop the trunk and right behind where the lights are pull the carpet
down and their will be of the following depending on the trim.
You will either see the light sockets themselves that you can twist and pull to change the bulb, or you will see the plastic nuts/screws that you can remove to remove the entire assembly in order to access the bulbs.
If it's your 3rd brake light, the screws to access the housing are located in the upper part of the trunk
Posted on Oct 26, 2009
the same thing would happen to me.. all i did was spray some wd-40 in to the door latches it's been over 2 years and it has not done it again
Posted on Jul 13, 2009
Is the fluid full enough? there should be a dipstick to tell where the level should be. Also is the belt tight enough? Wires loose?
Posted on Aug 22, 2009
Tips for a great answer:
Jun 05, 2015 | 2000 Lincoln Continental
Jul 11, 2014 | Lincoln Continental Cars & Trucks
Dec 28, 2010 | 2002 Lincoln Continental
Apr 21, 2010 | 2002 Lincoln Continental
May 30, 2009 | 1993 Lincoln Continental
Apr 03, 2009 | 1997 Lincoln Continental
Mar 14, 2009 | 1990 Lincoln Continental
Oct 16, 2008 | 1995 Lincoln Continental
451 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: