Question about 2000 Mercury Sable

Open Question

Where is the horn relay located?

Horn stopped working, but you hear the clicking sound inside the car. Fuse looks okay, but I can not locate the horn relay, if there is one?

Posted by on

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

MNfisherman
  • 11896 Answers

SOURCE: 2000 mercury grand marquis horn doesn't work.

The horn is in the very front behind the grille on the drivers side. Eiher the horn is bad or disconnected or the switch in the steering wheel is bad.

Posted on Nov 10, 2010

Testimonial: "Thank you. I asssumed that the problem was between the relay socket and the horn. You told me the horn location and I found the cable unplugged."

  • 254 Answers

SOURCE: my horn isn't working when i push it i hear

that sound that uyou are hearing is the horn relay clicking. you will have to go directly to the source which is the horn itself. Try adding power to the horn itself, to see if it will blow. Looking at the age of the car, most likely it will be the horn.

Posted on Oct 07, 2010

clifford224
  • 1975 Answers

SOURCE: horn dont work need location

I don't see a fuse for the horn but I can tell you the horn relay is located in the power distribution box located under the hood of the car in the engine compartment on the drivers side of the vehicle. Below is a diagram of the fuse layout. The horn relay is the one marked "R6". This should be in your owners manual if you have one. If you don't and would like a copy, you can email me at csautomotivecars@att.net with your make, model and year and I will be happy to email you a copy. No worries, no cost for it. I hope this helps and good luck.


clifford224_942.gif

Posted on Jun 29, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Where is horn located on 2003 chevy caviler


Horn(s) are typically located under the hood, behind and near the headlight assembly. It is not uncommon for a horn to stop working over time. It is also not unlikely that horn button in the steering column fails. To verify that the button is working, get the car to a very quiet location. Turn off all radios, blowers, etc. to make the car interior as quiet as possible. When you press the horn button, listen for a "click" noise from under the dashboard. This is the horn relay. If that happens, you know that the button(s) in the steering wheel are ok. If you don't hear the click, then the horn button or the horn relay may be the cause of the horn not working.

Jan 02, 2015 | Cars & Trucks

1 Answer

Bought a 1992 acura vigor and found horn fuse missing. when I replaced the fuse alarm goes off and constantly sounds. how do I stop it? I've read that there's a relay somewhere under the hood


horn relay located on the right side kick panel,you will see a row of relays,if horn relay is okay, more likely your horn control pad has a short inside causing horn button contacts to stick causing horn to keep blowing.

Oct 01, 2012 | 1992 Acura Vigor

1 Answer

The horn for my 1995 Subaru Legacy AWD will not work. I checked fuse and it is good. I just hear a clicking noise when I depress horn switch. Can you advise to how I can fix?


okay, the clicking noise is the horn relay which tells me the horn pad and the relay are working so the only thing left is the horns,look to make sure the horns are connected and if they are then i would say you have bad horns, the horns are a little hard to find sometimes, they are located in the front sometimes behind front bumper or on the inside of the front fender area. good day.

Jun 04, 2011 | Subaru Legacy Cars & Trucks

2 Answers

The horn in my 2003 chevy cavalier stopped working and i need to know why it stopped working and where the horn is located


It may be your horn fuse. It will be in one of your fuse boxes. Just follow your diagram on the fuse box lid.

Mar 05, 2011 | 2003 Chevrolet Cavalier

2 Answers

Horn not working


With something like this it's most likely a fuse burnt out. There is a fuse box located under the hood as well as inside the Jeep. Usually the lid has a map describing which fuses do what. If not, there should also be a map in your owner's manual.
1.Find the fuse associated with the horn and check if the metal piece in the middle is broken.(like a light bulb)
2.If its broken, replace with a fuse with the same amp rating. (number on the side/color)
3. If it still doesnt work than the connectors to the horn or the horn itself need replaced. The horn is usually located behind the grille or front bumper. It kind of looks like a black plastic snail usually.

Mar 02, 2011 | 1995 Jeep Wrangler

2 Answers

My horn stopped working.Cant find the fuse location or the relay ?


did you look under the hood driver side fire wall

Jan 24, 2011 | 1995 Buick LeSabre

1 Answer

My horn isn't working when i push it i hear clicking coming from where the fuse box is located


that sound that uyou are hearing is the horn relay clicking. you will have to go directly to the source which is the horn itself. Try adding power to the horn itself, to see if it will blow. Looking at the age of the car, most likely it will be the horn.

Oct 07, 2010 | 2000 Mercury Sable

1 Answer

Horn won't honk from horn button on wheel. Horn works from panic button. How can I check button on steering wheel? The car is a 2005 Mercury Grand Marquis. Thanks for help.


I replaced the horn relay which is located inside of fuse panel under the hood of car on the firewall, have someone push button to be able to hear a clicking sound coming out of the correct relay, then trade out relay of the same and see if horn works

Aug 14, 2010 | 2005 Mercury Grand Marquis

1 Answer

I need help with a 2000 Jeep Cherokee locating and fixing a horn that stopped working...fuse is okay


get a long wire and test the horn directly from the battery positive, if it works many times the vibration clears the problem, If you press the horn and do not hear a clicking sound from under dash, find fuse box in engine compartment, study all relays, find two that are exactly alike and swith with horn relay, test, if it works, there it is!

Mar 02, 2010 | Jeep Cherokee Cars & Trucks

2 Answers

Horn doesn't toot


the clicking will possible be the relay clicking . so it sound like you need a new horn mate.

Aug 25, 2009 | Chevrolet Cavalier Cars & Trucks

Not finding what you are looking for?
2000 Mercury Sable Logo

Related Topics:

348 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

fordexpert

Level 3 Expert

5495 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...