Question about 2003 Ford Crown Victoria

Open Question

2003 Crown vic gauges keep blowing fuses,does the lcm also operate it?and/or where is the relay?

I can up the fuse size and drive a little and the fuse for the gauges blows! I cannot find a relay and have already replaced all the fuses under the dash...does the lcm also control the instrument cluster?

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 77 Answers

SOURCE: 2003 F350 Intrument Cluster

If everything keeps going like that then it sounds like its a problem with the onboard computer. The computer controls all the guages and would explain why they all fail at the same time.

Posted on Oct 20, 2008

  • 7 Answers

SOURCE: Instrument cluster not showing odometer and

It could be the voltage regulator for your instrument cluster is the problem.

Posted on Jul 20, 2009

  • 2841 Answers

SOURCE: what size tires were on the 1984 crown vic's?

It should be listed on the driver's door post. The correct size for your car is 215/70-15

Posted on Sep 30, 2009

  • 1 Answer

SOURCE: 03 Crown Vic LCM problems. Can you rebuild the

http://www.crownvic.net/ubbthreads/ubbthreads.php?ubb=showflat&Number=1159835&nt=5&fpart=4

Posted on Dec 05, 2009

joevanek
  • 19 Answers

SOURCE: 92 crown vic - temperature guage on the dash is not working...

0900c152801e4775.gif

The temperature gauge sending unit is located in the front section of the intake manifold, just to the right of the alternator on the 4.6L engines. Got this from autozones repair manuals


Posted on Mar 16, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Where where do i find the fuse for the speedometer on a 2001 Crown Vic


There are three fuse's for the instrument cluster , all located in the central junction box (fuse panel ) inside the vehicle ,under the dash !
Fuse # 14 a 10 amp , fuse # 23 15amp. and #6 15amp . Look behind right and left kick panel . But i don't think this is a fuse problem , gauge itself could be bad .

Dec 09, 2016 | 2001 Ford Crown Victoria

1 Answer

The headlights don't work in my 2003 Mercury Marquis


First check the light bulbs if they are not the reason then, Welcome to the ford world, there is a thing called LCM (light control module in the grand marquis crown vics and lincoln town cars, sometime they go bad, your best bet before you look for replacing the LCM is to look for the headlight fuse and the relay, when you are sure it is not these two, then you can be sure its the LCM

Nov 19, 2014 | Mercury Cars & Trucks

1 Answer

'99 Ford Crown Vic LX: #12 30A Maxi fuse blows seconds after starting or ignition turned on.


i had this problem with my 1999 jeep grand cherokee laredo with the brake lights it kept popping fuses right after the ignition was turned on try putting a higher amp fuse in place of the old one that keeps blowing then check for shorts to the starter and check grounds and wires and also the transmission issue check the fluid and then if the fluid is fine change the transmission filter the filter may have not gotten replaced when the transmission was rebuilt and may be clogged or dirty

Oct 04, 2012 | 2002 Ford Crown Victoria

2 Answers

Insrument panel loses power periodically


this is just a loose fuse or connector wiggle the connector of the lighting control module just above you gas pedal under the dash.turn lights on try to kick slightly the module(black metal box).Sometimes you need to open it and re apply heat and solder on the relay terminals fixed on the board.

Feb 01, 2010 | 2006 Ford Crown Victoria

4 Answers

03 Crown Vic LCM problems. Can you rebuild the relay in it?


http://www.crownvic.net/ubbthreads/ubbthreads.php?ubb=showflat&Number=1159835&nt=5&fpart=4

Nov 25, 2009 | 2003 Ford Crown Victoria

2 Answers

Hvac blower not operating any speed,


have you tried replacing the blower resister module?

Sep 29, 2009 | 2003 Ford Crown Victoria

2 Answers

I have a 2003 Crown Vic The air conditioning don't work, Where do I start looking for the problem? Is there a Fuse I can check?


When the Police decommissioned the car they removed Relay 204 in the fuse box under the hood. I replaced the Relay. Problem solved.

Jun 22, 2009 | 2003 Ford Crown Victoria

3 Answers

2001 crown vic keeps burning 30A PCM relay fuse


have fuel pump checked i have known a bad fuel pump shorting out causing pcm fuse to blow.

May 10, 2009 | 2001 Ford Crown Victoria

1 Answer

2003 ford crown vic hard steering


i would have to say to check for a relay in your fuse boxes for power steering pressre switch or it may have its own police pkgs have a lot of relays due to all the extras

Sep 10, 2008 | 2003 Ford Crown Victoria

1 Answer

1997 Crown Vic blows radio fuses


Try checking all the grounds for the radio, over time they can weeken. If that doesn't work, put in a new ground wire with a heavier gauge, that should fix it. It sounds like a ground problem.

Good luck, Daniel

Jul 09, 2008 | 2003 Ford Crown Victoria

Not finding what you are looking for?
2003 Ford Crown Victoria Logo

Related Topics:

186 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5470 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...