Question about 1995 Isuzu Pickup

1 Answer

When I start my 1995 Isuzu Pup its idel is really low why?

Posted by on

  • Anthony Dale Feb 15, 2012

    I can't really fix it without help the people at advanced auto wont even touch it

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Isuzu Master
  • 76,164 Answers

You may have a dirty throttle valve and idle speed control valve, it is common on older systems, to clean the system that holds the idle speed up cold do the following:

To correct this problem Buy a can of throttle valve cleaner (it is made by CRC) from the local auto parts store, NEVER USE CARB CLEANING SPRAY, IT DESTROYS THE ANTI-STICK TEFLON COATING, spray it into the air intake through the throttle body of the engine until you have used about half the can, you will need to hold the idle up while you do this, it will try to stall, after this shut the engine down and disconnect the Negative (-) battery cable for 5 minutes. The intake is now clean, if you continue to have the idle speed control problems you may need to seek the help of a professional.

Posted on Feb 15, 2012

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the heater fan relay switch on a 1981 Isuzu pup


Blower motor fuse - IsuzuPup.com

www.isuzupup.com/viewtopic.php?t=18202
Mar 4, 2013 - Never seen a blower motor without a relay whether it has a/c or not. Just trace the wires from the blower speed switch. 1989 Isuzu Trooper S/ ... Blower motor turning instruments cluster lights on?
Apr 8, 2013
Blower motor problems
Jun 29, 2012
wiring diagram for 82 luv/pup
Jan 3, 2011
blower fan control, 81 luv diesel
Oct 14, 2009
More results from www.isuzupup.com

1981 ISUZU PICKUP 2.2L L4 DIESEL Auto Parts - RockAuto


Nov 29, 2015 | Isuzu Cars & Trucks

2 Answers

Howdo i find a 4 speed transmission to fit on a G200Z engin modle Isuzu pup 1985


I would start by calling local salvage yards and see what they have. If they don't have one they can usually put it on a parts seach and locate something.

Jun 07, 2015 | 1985 Isuzu Pickup

1 Answer

How to route vacuum lines 95 isuzu pup 2.3 fi w/map sensor


so something different. run the line thru the hood and to the rear end of the vehicle

May 31, 2014 | 1995 Isuzu Pickup

1 Answer

I have a1985 isuzu pup with the 1.9 ga s engine and when i crank it it idels high with the carburater rebuilt


check the position of the idle screw on the throttle linkage and adjust the idle /mixture screw as well as both affect the idle speed . Check for any vacuum leaks before this

Nov 30, 2013 | Cars & Trucks

1 Answer

My car runs rough even will stall changed spark plugs and wires service engin soon light still comes on when ideling it sound like pup pup like it cant breath


Take it to Autozone or similar and get a free scan. Do what the clerks tell you or get the Code numbers and return to this site for advice.

Oct 08, 2012 | 1989 Chevrolet Celebrity

1 Answer

1985 isuzu pup cold the pickup has oil psi 45 hot it has oil psi 10- 0psi ?


Well how recant is the reading been saying this i mean did it all of a sudden start reading low . 10 PSI is to low for a hot engine you could try replaceing the oil pressure sending unit but if this dosn't fix it then i would have to say you have a serious problem interinaly in the engine eighter valve or ring related or a big oil leak somewhere dose it burn oil?

May 04, 2011 | 1985 Isuzu Pickup

1 Answer

My 91 isuzu pickup with 2.3L starts and idels but dies right down


make sure your fuel filtre okay and breather on fuel tank

Apr 13, 2010 | 1992 Isuzu Pickup

1 Answer

1991 isuzu pup idle problem


Before you do anything check the coolant level,not just the reservoir but the radiator(check it when the engine is cold!).

Mar 20, 2009 | 1991 Isuzu Pickup

1 Answer

Failure of heater blower


The blower motor might be shot

Dec 05, 2008 | 1995 Isuzu Pickup

Not finding what you are looking for?
1995 Isuzu Pickup Logo

247 people viewed this question

Ask a Question

Usually answered in minutes!

Top Isuzu Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Steve Hurc
Steve Hurc

Level 3 Expert

450 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...