Question about 1998 Mitsubishi Eclipse

1 Answer

Left signal light wont turn off but the hazard light will come on.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Try holding the hazard button slightly down a little at a time. this happend on my truck and my hazard switch was bad

Posted on Feb 14, 2012

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

co7196
  • 3433 Answers

SOURCE: my right turn signal is always on.. no matter

Replace the turn signal flasher unit. Contacts seem stuck closed. Good Luck _Ned_

Posted on Sep 26, 2009

sleepygsx
  • 98 Answers

SOURCE: turn signals wont work

also could be the actual turn signal lever, i have an extra if you want it, erik-mcdonald@student.kirkwood.edu also have anyother part you would need good luck
erik,

Posted on Sep 11, 2008

  • 88 Answers

SOURCE: When turning left, push down signal and nothing

try checking the fuse for the turn signal if not that try replacing bulb turn signal is differnt than hazzards or try replacing flasher its a big grey cylinder on fuse panel.

Posted on Oct 10, 2009

HansPP
  • 2510 Answers

SOURCE: Left and right turn signals do not work. Hazard

Check the indicator switch, that seems to be all that is left in the system, except the flasher relay, depending on whether the vehicle uses the same one for the hazards or not.

Posted on May 13, 2011

Testimonial: "I'll check it, thanks"

elix0411
  • 3530 Answers

SOURCE: Turn signal and hazard lights

Welcome to Fixya

Flasher is located underneath the dash (Driver side fuse panel). See picture of the flasher below.
elix0411_59.jpg Thank you for using Fixya!

Posted on Jul 14, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2002 Park Avenue my turn signals do not work my flashers work


gmlogoflat.gifService Information
2002 Buick Park Avenue ' Park Avenue (VIN C) Service Manual ' Body and Accessories ' Lighting Systems ' Description and Operation ' Document ID: 643323


Turn Signal/Cornering Lamps
The HZDT/SIG fuse in the fuse block - underhood - left supplies battery positive voltage to the turn signal/hazard flasher module and have ground at G202. The turn signal lamps may only be activated with the ignition switch in the ON or ACCY position. The T/SIG fuse in the fuse block - underhood - left supplies battery positive voltage to the turn signal switch. When the turn signal switch is placed in either the left or right position, current flow is from the turn signal switch assembly to the turn signal/hazard flasher module. The turn signal/hazard flasher module then sends an on-off voltage signal to either the left or right turn signals and their instrument cluster (IPC) indicator. When the hazard switch is pressed, all the turn signal lamps will flash including both IPC turn signal indicators. The left turn signals have ground at G106, G400 and at G402. The right turn signals have ground at G105 and G400. The turn signal switch supplies battery positive voltage to the cornering lamps, the left cornering lamp has ground at G105 and the right cornering lamp has ground at G106.
+snpvvsvwho06+5aqhepgaaaabjru5erkjggg==










2002 Buick Park Avenue ' Park Avenue (VIN C) Service Manual ' Body and Accessories ' Lighting Systems ' Description and Operation ' Document ID: 643323

May 10, 2016 | Cars & Trucks

1 Answer

No turn signals. hazard lights work only when button is held in. Hazzards will not stay on. Is problem in turn sig switch or hazard light switch


If hazard switch wont stay engaged and the turn signals run through it I would replace hazard switch then retest

Apr 11, 2015 | Cars & Trucks

1 Answer

Left turn signal and left Hazard light blow fuse


Probably a bad bulb, or a short in the wiring. Try a new bulb, if that does not work, trace the wiring looking for any chafing against metal.

Sep 26, 2014 | Cars & Trucks

1 Answer

I have an 02 kia sportage. my signal lights come on but dont blink outside. no lights for the signal lights come on on the dash at all. also, no hazard lights.


If the 15A HAZARD fuse in the passenger compartment fuse box is OK, power is getting to the hazard function of the flasher unit. Pressing the hzard switch should cause the hazard lights to flash. HOWEVER, there is an electronic time and warning indication system module connected to to the hazard switch lead and that may be affecting things. If the 10A TURN fuse is OK, power is applied to the turn switch (with the engine in START or RUN) and you state you can select a right or left turn. HOWEVER, the RED/WHT and RED/BLU outputs from the flasher unit connect directly to the front and rear turn lamps and the instrument cluster turn indicators so you are not getting any flasher output. Again, that electronic time & warning indication system module could be affecting things

Oct 26, 2012 | Cars & Trucks

1 Answer

How to locate and replace the flasher relay. the turn signals and hazard lights wont work.


The flasher module is located behind the left side of the dash. (See Picture below)
On your vehicle, the power for both the turn signals and the hazard flashers goes through the hazard switch.
The symptoms you are describing can be caused by the flasher module, however, it could also be caused by the hazard switch.

Please also review this article: What Else Could Be Wrong?



dttech_58.gif

Apr 26, 2011 | 2001 Kia Sephia

3 Answers

Turn signals wont work


replace the hazard fuse under the dash any repair shop can heklp you with it

Aug 31, 2008 | 1999 Mitsubishi Eclipse

Not finding what you are looking for?
1998 Mitsubishi Eclipse Logo

120 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8140 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...