Question about 1990 Oldsmobile Eighty Eight

1 Answer

Water pump 1990 oldsmobile 88 royale

The water pump is wobbling and the serpentine belt keeps winding off. can i tighten the water pump so that it wont wobble or do i have to replace the water pump?

Posted by on

  • richard allen Jun 04, 2012

    you have a bad w pump iv chnged 100,s make sure the belt tentioner is ok (not crooked) and i wd sugjest a new belt

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Oldsmobile Master
  • 5,370 Answers

For water pump replacement i suggest you to check the help link provided below.click the link below :----Water pump replacing procedure for all vehicles? http://technoanswers.blogspot.com/2011/11/water-pump-replacing-procedure-for-all.html
---------HOW TO REPLACE A WATER PUMP

http://schematicsdiagram.blogspot.com/2011/07/how-to-replace-water-pump.html

------------------
How to route Water Pump Belt for 1992 Oldsmobile ?

http://carbeltrouting.blogspot.com/2011/12/how-to-route-water-pump-belt-for-1992.html

---------
How to replace Water Pump on Car ?

http://repairhelpcenter.blogspot.com/2011/11/how-to-replace-water-pump-on-acura-car.html

---------
How to Remove Water Pump?

http://technoanswers.blogspot.com/2011/12/how-to-remove-water-pump-on-toyota.html

-------
Where is Water Pump located ? http://technoanswers.blogspot.com/2011/12/where-is-water-pump-located-on-toyota.html
----------Below is the master help link provided to go through belt routing diagram:---Timing belt,drive belt,serpentine belt,accessory belt,fan belt,engine belt routing diagrams for all types of car models?
Click the link below :----http://carbeltrouting.blogspot.in/2012/02/timing-beltdrive-beltserpentine.html
----------This will help.Thanks.

Posted on Feb 17, 2012

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 48 Answers

SOURCE: 1996 Oldsmobile 88 shakes and wobbles when Drive or reverse gear and stopped

its possible the motor mounts are worn out. not sure about cost

Posted on Jun 21, 2008

  • 1118 Answers

SOURCE: How to replace the Serpentine belt in a 1993 oldsmobille 88 royal

There should be a diagram under the hood that shows you how to route the belt, If no diagram, All your major auto parts stores have web sites you can go to to get detailed instructions and diagrams to do it.

Posted on Apr 01, 2009

bschilz
  • 2049 Answers

SOURCE: Serpentine belt diagram 94 olds 88 royale

Here's a link to the serptentine diagram for our '94 Olds 88 Royale...

http://www.gates.com/common/part_locator/view_diagram.cfm?id=S6005

Posted on Jan 10, 2010

  • 102 Answers

SOURCE: 1983 Delta 88: how much MPG does a 1982 Oldsmobile delta 88 royal...

Personal experience between 13 - 20 for most models with the v-6 and v-8. the 5.7l is about the most fuel efficient at roughly 17

Posted on May 19, 2010

  • 4977 Answers

SOURCE: i need a picture of

there may be a white decal on the upper rad support that shows the belt routing if its still there.i`m assuming that the belt is off and you need to know how it goes back on,if not then draw the routing on a piece of paper or go to a parts store they may have the diagram there or go to a library and look for it in the auto books.

Posted on Apr 14, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Water pump


Which engine?

  1. Drain the radiator

91192665


  1. Loosen the water pump pulley bolts.
  2. Remove the serpentine belt.

91192666
  1. Remove the water pump pulley bolts and pulley.
  2. Remove the water pump bolts, pump and gasket.
  3. Clean the water pump mating surfaces.
Installation Procedure
  1. Install the water pump gasket and pump.
91192667


  1. Install the water pump bolts. Tighten the water pump bolts to 89 inch lbs.

91192668
  • Install the water pump pulley and bolt until snug.
  • Install the serpentine belt.
  • Tighten the water pump pulley bolts. Tighten the water pump pulley bolts to 18 ft. lbs.
  • Fill the cooling system and purge of air.
  • Inspect for leaks.
  • Sep 27, 2012 | 2001 Oldsmobile Alero

    1 Answer

    How to tighten a water pump on a 1990 oldsmobile 88 royale


    For water pump replacement i suggest you to check the help link provided below.

    click the link below :----

    Water pump replacing procedure for all vehicles?

    http://technoanswers.blogspot.com/2011/11/water-pump-replacing-procedure-for-all.html
    ---------

    HOW TO REPLACE A WATER PUMP

    http://schematicsdiagram.blogspot.com/2011/07/how-to-replace-water-pump.html

    ------------------
    How to route Water Pump Belt for 1992 Oldsmobile ?

    http://carbeltrouting.blogspot.com/2011/12/how-to-route-water-pump-belt-for-1992.html

    ---------
    How to replace Water Pump on Car ?

    http://repairhelpcenter.blogspot.com/2011/11/how-to-replace-water-pump-on-acura-car.html

    ---------
    How to Remove Water Pump?

    http://technoanswers.blogspot.com/2011/12/how-to-remove-water-pump-on-toyota.html

    -------
    Where is Water Pump located ?

    http://technoanswers.blogspot.com/2011/12/where-is-water-pump-located-on-toyota.html

    -----------

    This will help. Thanks.

    Feb 14, 2012 | 1990 Oldsmobile Eighty Eight

    1 Answer

    1995 Oldsmobile Cutlass Ciera, replace waterpump


    Hi there:
    Check this procedure...

    2.2L Engine (see Figure 1)
    Partially drain the engine coolant from the vehicle.
    Remove the serpentine drive belt from the vehicle.
    Loosen and position the alternator to one side.
    Unbolt the water pump pulley, then remove the pulley.
    Unbolt the water pump, then remove the pump and gasket.

    12_16_2011_1_35_31_pm.gif

    Fig. 1: Water pump used on 2.2L engines

    Clean the gasket areas thoroughly.

    To install:
    Install a new gasket to the water pump mating surface.
    Attach the water pump to the engine with the retaining bolts, tighten them to 18 ft. lbs. (25 Nm).
    Attach the water pump pulley, then tighten the bolts to 22 ft. lbs. (30 Nm).
    Properly position the alternator.
    Install the serpentine drive belt.
    Fill the coolant system, start the engine, then top off the fluid.


    3.1L Engine (VIN M)
    Partially drain the coolant from the vehicle.
    Remove the serpentine drive belt from the vehicle.
    Unbolt the pulley from the pump.
    Remove the water pump mounting bolts.
    Remove the pump from the engine, then clean the gasket area.

    To install:
    Attach the water pump with gasket to the engine with the mounting bolts.
    Tighten the mounting bolts to 89 inch lbs. (10 Nm).
    Attach the pulley with it's mounting bolts. Tighten them to 18 ft. lbs. (25 Nm).
    Install the serpentine drive belt.
    Fill the coolant system, start the engine and top off the fluid. Check for leaks.


    Hope this helps; also keep in mind that your feedback is important and I'll appreciate your time and consideration if you leave some testimonial comment about this answer.

    Thank you for using Fixya, and have a nice day.

    Dec 01, 2011 | 1995 Oldsmobile Cutlass Ciera

    2 Answers

    Need the belt routining diagram for 1983 olds delta 88 royale, 5.0 liter engine


    Air pump/Smog pump and Compressor go on first, on the shaft. Power steering goes on next Altenator is the last one. After market pulleys and the above mentioned parts may change this order.. 1983 olds delta 88 royale

    Aug 19, 2011 | 1983 Oldsmobile Delta 88

    1 Answer

    I need a picture of a 1995 oldsmobile 88 royal 3800 serpentine belt diagram


    there may be a white decal on the upper rad support that shows the belt routing if its still there.i`m assuming that the belt is off and you need to know how it goes back on,if not then draw the routing on a piece of paper or go to a parts store they may have the diagram there or go to a library and look for it in the auto books.

    Apr 14, 2011 | 1995 Oldsmobile 88

    1 Answer

    How to install a serpentine belt and tension it on a 1990 Dodge


    you should have a tensioner look under the hood for a belt schimatic btw your local library has auto manuals its a good resource.

    Apr 23, 2009 | 1990 Dodge Caravan

    1 Answer

    How to replace the Serpentine belt in a 1993 oldsmobille 88 royal


    There should be a diagram under the hood that shows you how to route the belt, If no diagram, All your major auto parts stores have web sites you can go to to get detailed instructions and diagrams to do it.

    Apr 01, 2009 | 1993 Oldsmobile Eighty Eight

    Not finding what you are looking for?
    1990 Oldsmobile Eighty Eight Logo

    403 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Oldsmobile Experts

    yadayada
    yadayada

    Level 3 Expert

    75807 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22133 Answers

    Jeff Turcotte
    Jeff Turcotte

    Level 3 Expert

    8172 Answers

    Are you an Oldsmobile Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...