Question about 2001 Chrysler Sebring

Open Question

Replacing brake caliper 2001 sebring - 2001 Chrysler Sebring

Posted by Anonymous on


3 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 11896 Answers

SOURCE: i have a chrysler sebring lx sedan 2001 and i have

This is most likely your bushings or axle boots you are hearing. Is it mostly when turning? Or when driving? Are your tires worn?

Posted on Aug 28, 2009

  • 140 Answers

SOURCE: Replaced rear brake calipers on

Try pumping breaks and let go then break bleeder loose if fluid shoots out it usually means the rubber line is collapsed on the inside and needs replaced

Posted on Jun 27, 2011

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Replace front brake pads

1. Raise vehicle
2. Support on jack stand
3. Remove lug nuts
4. Remove wheel
5. Remove bolts holding caliper
6. Remove calipers
7. Remove brake pads
8. Push piston into caliper
9. Inspection rotor for damage if damaged replace
10. Install new pads
11a. Replace caliper on rotor
11 b. Replace bolts in caliper and tighten
12. Bleed brakes
13. Replace wheel
14. Replace lug nuts
15. Lower vehicle
16. Tighten lug nuts
17. Test drive vehicle

Oct 17, 2015 | 2004 Chrysler Sebring

1 Answer

Where is the bleeder valve on an 01 sebring

Bleeder valve for brakes is on the caliper, bleeder valve for radiator is at the top, middle left near front of motor if thats what youre looking for.

May 08, 2014 | 2001 Chrysler Sebring

1 Answer

Replaced rear brake calipers on 2003 Sebring. Now caliper does not release off of rotor. Brake line has been bled. Changed caliper out because previous one was not releasing... Any ideas why this is...

Try pumping breaks and let go then break bleeder loose if fluid shoots out it usually means the rubber line is collapsed on the inside and needs replaced

Jun 27, 2011 | 2003 Chrysler Sebring

1 Answer

I changed front brakes on a 2004 sebring now the pedal is soft

If you opened a brake line,or bleed screw,then you will have to bleed the brakes.If not,check the calipers to see if one is not letting go of the brake rotor,if so,there is a brake hose going to the brake caliper ,that is colasped inside,and it needs to be replaced.

Jul 18, 2010 | 2004 Chrysler Sebring

1 Answer

Change front brake rotors on sebring 2001

jack front of car up, put on jack stands, remove tires, remove break calipers, remove caliper mounting bracket if nessisary, remove rotor.

Mar 18, 2010 | 2001 Chrysler Sebring

1 Answer

'97 sebring w/ rusted brake lines need replacing

Look at spending around 200-400 dollars to replace all the lines, and possibly calipers or wheel cylinders if the bleeder screws are rusted out also.

Jun 23, 2009 | 1997 Chrysler Sebring

1 Answer

Brake problems

There are seven (7) common causes of brake grab/lock. All of them are listed in the following linked handy diagnostic article:

You speak of having replaced the caliper, but does include the piston, itself. Of the seven causes, caliper piston may be stuck. Check the other six causes in the article linked above.

Good luck!

Jun 14, 2009 | 1999 Chrysler Sebring

Not finding what you are looking for?
2001 Chrysler Sebring Logo

Related Topics:

101 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts


Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8548 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides