Question about 2000 Ford Mustang

Open Question

2000 Ford Mustang Coil Pack Diagrm

3.8 Litre V6

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

emissionwiz
  • 75108 Answers

SOURCE: 99 mustang 3.8l coil pack

this diagram is from the Factory service manual,66b104f.gif the coil pack may be over the passenger valve cover on your year, the orientation of the coil leads is the same though.

Posted on Apr 07, 2009

  • 14036 Answers

SOURCE: ford mustang - year 2000 - 3.8 liter

BESURE TO NUMBER LOCATION OF PLUGS WIRES GOING TO COIL PACK.SO YOU WONT GET CONFUSED.REMOVE THE ELECTRICAL WIRES GOING TO COIL PACK.THEN REMOVE COIL PACK SCREWS.THEN REMOVE COIL PACK.I HOPE THIS HELPS.

Posted on Aug 30, 2009

Testimonial: "thanx, good advice. remember to suggest the code reader to people. take care"

mnelsonix
  • 58 Answers

SOURCE: ford mustang - year 2000 - 3.8 liter. The coil pack is out?

I replaced the coil pack to no avail. I also purchase a code reader while at the auto parts store. This device told me cylinder 3 was misfiring (P0303). I found that the spark plug wire had shorted out on the manifold sensor tubes. Replaced that wire and done.

I highly recommend keeping a code reader in your car tool kit. very useful.

Posted on Sep 09, 2009

  • 96 Answers

SOURCE: 2001 mustang 3-4 not firing

Have compression checked

Posted on Sep 24, 2009

  • 12 Answers

SOURCE: I need to know of any transmission changes in the

The V6 Mustang Auto transmissions from 1999-2004 Auto transmissions will be compatible as the speedo sensor will be digital in them. I believe the 1994 - 1998 are all analog.

Posted on May 30, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Both coils do not fire on 1 and 4. Will start but only running on 2 cylinders. Could both coils be bad or should I look elsewhere?


Part 3 -How to Test the Ignition Module and Crank Sensor ...

easyautodiagnostics.com > Ford > 2.3L
Mar 1, 2012 - Spark plugs for cylinders #2 and #3 get spark at the exact same time. ...voltage -12 Volts) to both individual ignition coils within the coil pack. ... Ford Mustang or Ranger (or 2.3L Mazda B2300), this is what you'll need ... for this 'Switching Signal' at the coil pack... but you can also test this ... 1991, 1992, 1993.

How to Diagnose a Misfiring Cylinder (2.3L Ford Ranger ...

troubleshootmyvehicle.com > Ford > 2.3L
Apr 3, 2012 - Bad Fuel Injectors can cause a Misfire Condition. ... the ignition system on the 2.3L Ford Mustang or Ranger consists of 2 ignition coil packs, ...

2002 ranger misfire rough idle - Discussion on Topix

www.topix.com > Ford Ranger
Jul 27, 2007 - My truck is giving the code misfire in number 4 cyl. I replaced my spark plugs, Wires, Coil packs (both of them) and all my fuil ... three (3.0L v6) go bad, the fuel/air mixture gets messed up. Judged: 2. 2 ... My truck runs rough only at idle. ...code for ford ranger 2002, 2.3 5speed. truck runs like a champ but that ...

Extremely stumped! I need the best and brightest 1994 Ford ...

answers.edmunds.com > Edmunds Answers

Jan 31, 2016 | Cars & Trucks

1 Answer

1997 MAGNA EXECUTIVE TF 4 CYLINDER OR 6 CYLINDER


both types ones a 2.4 and there are 2 variant V6
2.4-Litre "4G64"I4
3.0-Litre "6G72"V6
3.5-Litre "6G74"V6


Sep 26, 2014 | 1997 Mitsubishi Magna

1 Answer

Need torque spec for a 1998 3.1 litre chevy v6


Hi there:
Are you refer at engine torque specf? Please confirm us.

Aug 10, 2012 | 1998 Chevrolet Malibu

1 Answer

Need to know if a 305 will bolt up to a v6 transmission in a omega 3.8 v6


i have 79 monza, 3.8 litre, v6, 4 speed standard...i want to replace it with 305...will it bolt to the transmission??

Aug 05, 2012 | Cars & Trucks

1 Answer

Firing order diagram on 4998 ford mustang


Firing order diagram on 1998 Ford Mustang V6: 1 - 4 - 2 - 5 - 3 - 6 LEFT bank numbered 1 to 3, right bank numbered 4 to 6 coil Pack: 1 2 3 5 6 4

e23db4c.jpg

Please rate my response. Thanks!

May 20, 2010 | Cars & Trucks

1 Answer

2000 Mustang: which is the position for the wires for the sporck...


For the 2000 Ford Mustang:
Based on your question you should have the 3.8L V6 and not the 4.6L SOHC or DOHC V8; however I have included all below.

For the 3.8L V6:
Firing Order:
1-4-2-5-3-6
Cylinders:
......(back)......
|..3..|.......|..6..|
|..2..|.......|..5..|
|..1..|.......|..4..|
......(front)
Ignition Coil Connections:
....(back).....
|..1...2...3..|
|..5...6...4..|-this is correct (564).
....(front)

For the 4.6L SOHC and DOHC:
Firing Order:
1-3-7-2-6-5-4-8
Cylinders:
........(back).........
|...4...|......|...8...|
|...3...|......|...7...|
|...2...|......|...6...|
|...1...|......|...5...|
........(front)

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!

May 17, 2010 | 2000 Ford Mustang

Not finding what you are looking for?
2000 Ford Mustang Logo

Related Topics:

31 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5471 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...