Question about 1996 Chevrolet Lumina Mini

1 Answer

I need a diagram for push rods positioning. - 1996 Chevrolet Lumina Mini

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Chevrolet Master
  • 5,332 Answers

The old long and short push rods. The long pushrods are for the exhaust valves. You can remember this by thinking, it's been a LONG day...I'm EXHAUSTed. The short ones are for the intake valves. You can distinguish the exhaust and

Posted on Feb 15, 2012

  • Jeremy W.
    Jeremy W. Feb 15, 2012

    Intake valves by loking through the intake passages in the head when the lower intake is removed. If you can see the valve it is an intake valve and a short pushrods will go tn between that rocker and lifter.

    Let me know if you have any questions and I'll do my best to answer them. Thank you for using FixYa.com!

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Push rod diagram


Exhaust push rods are longer
  • 6.0740 Inch Overall Length
  • Standard Size
  • Intake valves are
  • 5.7460 Inch Overall Length
  • Standard Size. Front head.
front head standing in front of car passenger to driver side
Ex , in ,in Ex ,in Ex

rear head standing in front of car passenger to driver side
Ex. ,In , Ex , In , In , Ex

remember exhaust push rods are longer
Rocker arm bolt ................................ 124 lb. in.plus 30 degrees

Apr 21, 2014 | 1999 Pontiac Grand Am GT

1 Answer

1984 ford f150 ignition switc/ actuator rod. For years now I have been using a pair of pliers to start my truck, I roll the key forward to disengage the steering wheel lock, then push the actuator rod...


Yea, you'll still need your key to unlock the steering wheel. Just get a properly rated DPDT (double pole double throw) switch that is "on-off-on" from radio shack or somewhere similar, as we'll as a momentary switch/push button to actuate the solenoid. Make one position on the DPDT your accessory position and the other your run position. Make sure it's in the run position when you go to start it. Again, you will need the key to unlock the column and possibly your shifter. Look up diagrams to figure out which wires you will need to have on the switch. It'll take a little engineering on your part, but if you know your wires, you can do it. Best of luck!

Oct 28, 2012 | Cars & Trucks

2 Answers

Valve lash procedure


i need to know how to adjust the valves on 02 pont sunfire

Nov 20, 2011 | 1991 Chevrolet K1500

1 Answer

Need position on long and short push rods on GM 3100 v-6 1998


Goto your local chevy dealership, they have a parts counter and they can print from there pc all diagrams you might need and other info on that motor.

Mar 16, 2011 | 2003 Chevrolet Impala

2 Answers

Excursion limited edition. Brake lights stay on.


Check that the pedal height isn't sagging due to low brake fluid level. Also check for adjustment of the brake light switch or the BPP (Brake Pedal Position) switch.

Brake Pedal Position (BPP) Switch Removal & Installation To Remove:
  1. Disconnect battery negative cable.
  2. Disconnect brake pedal position (BPP) switch electrical connector.
  3. Remove self locking pin.
  4. Remove switch from brake master cylinder push rod.
  5. Remove push rod spacer.
  6. Remove push rod bushing.
To Install:
  1. Install push rod bushing.
  2. Install push rod spacer.
  3. Install switch to brake master cylinder push rod.
  4. Install self locking pin.
  5. Connect electrical connector.
  6. Connect battery negative cable.
prev.gif next.gif

Jan 25, 2011 | 2003 Ford Excursion

1 Answer

I need good photos or instructions to change the brake light switch on a 1999 ford expedition


from autozone.com
f43af9d.gif Fig. 2 Brake pedal position switch removal- F-150, F-250, Expedition and Navigator; 1999-00 F-250SD, F-350, and F-Super Duty Models
  1. Disconnect the negative battery cable.
  2. Disconnect the brake pedal position switch.
  3. Remove the self-locking pin.
  4. Remove the brake pedal position switch from the brake master cylinder push rod.
  5. Remove the brake master cylinder push rod spacer.
  6. Remove the brake master cylinder push rod bushing.
  7. The installation is the reverse of the removal.

Sep 24, 2010 | 1999 Ford Expedition

1 Answer

I need advice on how to get the ignition switch out to replace it


Hope this helps you! Please don't forget to rate....thanks!!


c025733.gif
Ignition switch installation-1984-90 models


  1. Disconnect the negative battery cable.
  2. Remove the steering column cover.
  3. If equipped with automatic transaxle, position the gear selector into DRIVE and disconnect the indicator cable.
  4. Remove the lower panel reinforcement.
  5. Drop the steering column for switch replacement.
  6. Disengage the wiring connector from the ignition switch.
  7. Position the ignition lock cylinder into the LOCK position.
  8. Tape the ignition switch rod to the steering column to prevent the rod from falling out of the lock cylinder assembly.
  9. Remove the screws attaching the ignition switch to the column jacket.
  10. Remove the ignition switch by rotating the switch 90 degrees and pulling up to disengage from the rod.
To install:
  1. Rotate the switch 90° and push down to engage the rod.
  2. Install the screws to the ignition switch mounting plate but do not tighten.
  3. Remove the tape holding the rod to the column.
  4. Adjust the switch by pushing up on the switch to take up rod system slack. This must be done with the key cylinder in the LOCK position and the key removed.
  5. Tighten the screws attaching the switch to the column.
  6. Connect the wiring connector to the ignition switch.
  7. Install the steering column.
  8. Install the steering column cover.
  9. Connect the negative battery cable.

May 11, 2010 | 1990 Plymouth Grand Voyager

2 Answers

Where can i find a steering column diagram for a 1995 ford f-series truck.  The ignition spins freely and I can't find the problem.  I can't shut the truck off by the ignition.


the spindle has broke or the switch doesnt work ,think its a complete unit ,withjkey in a pin can pushed in on the casing releasing the barrel so that it can be changed ,key must be in aux position to release

Dec 12, 2009 | 1995 Ford F150 Styleside Regular Cab

1 Answer

Need the positioning of push rod long and short push rods 3.1 motor


Hi the LONG push rods are EXHAUST
the SHORT ones are INTAKE

May 17, 2009 | 1995 Pontiac Grand Am

1 Answer

Push rod diagram


Found on the web, not sure what you mean about pinholes, the push rods spin freely when they are in the engine.

1d607a3.jpg

Apr 10, 2009 | 1992 Chevrolet Lumina

Not finding what you are looking for?
1996 Chevrolet Lumina Mini Logo

177 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8522 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...