Question about Cars & Trucks
The car jerks when it goes in every gear
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: 2000 Buick Lasabre jerks
By jerking I am assuming you mean abrupt shifting? If so, my 2000 Buick Lesabre did the same thing going from first gear to second and then again when it went into overdrive. The culprit was the pressure control solenoid in the transmission. There is a pressure test to determine if it is bad. Apparently sediment from the trans fluid can cause this soleniod to stick and this coould be the cause of your problem.
Posted on Feb 06, 2009
you should go to a transmission guy they have computers that will find the problem and i think that its free... but i think that your transmission needs to be rebuilt, theres a lot that can go wrong with them things
Posted on Mar 25, 2009
HI MY NAME IS JUAN:
I HAVE A 93 BUICK SKYLARK CUSTOM
AND I HAD THE SAME HESITATION.
I CHAGED GAS FILTER, AIR FILTER, AND USE SEA FOME IN MY GAS TANK AND USE IT ALSO TO CLEAN THE INTAKE SYSTOM, AND IT HELPED ALOT. TWO MONTHS DOWN THE LINE HADE THE SAME HESITATION AND IT WAS ONE OF THE INISION COIAL PACK WAS NOT GIVING THE ELETRICAL SPARK TO THE PLUG. I CHECK IT BY PULLING THE CABLE OFF THE SPARK PLUG WITH THE CAR RUNNING AND FOUND THE ONE THAT WAS NOT GIVING SPARK. I REPLACED THE PACK FOR THAT CILINDERS PLUG AND THE PROBLEM WAS GONE.
HOPE THIS CAN HELP YOU.
Posted on Sep 21, 2009
CHECK ENGINE light??? Whenever the 'CHECK ENGINE' (Service Engine Soon) light comes on, the ECU (Engine Control Unit) sets a Diagnostic Trouble Code (DTC). These codes identify the particular engine management system which caused the light to come on.
You'll need to use/find an OBDII (On-Board Diagnostic) Scanner to retrieve any code which have been stored in the ECU computer. Afterward, we might be able to help you DIAGNOSE the problem and perhaps eventually fix the problem.
Posted on Oct 04, 2009
Tips for a great answer:
Dec 01, 2014 | 2005 Buick LeSabre
Aug 06, 2014 | Volkswagen Golf Cars & Trucks
Apr 16, 2012 | Cars & Trucks
Feb 27, 2012 | 2005 Buick LeSabre
Feb 21, 2010 | 1995 Buick Park Avenue
Jan 30, 2010 | 2000 Buick LeSabre
Dec 16, 2009 | 2005 Buick LeSabre
Feb 05, 2009 | 2000 Buick LeSabre
29 people viewed this question
Usually answered in minutes!