Question about 1991 Mercury Capri

Open Question

1991 Capri - the oil pressure gauge always reads low. Seller told me this was the same since new. Drives okay and oil looks fine. Is this a known issue with ford capri 1991?

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
richrobi
  • 15 Answers

SOURCE: 1991 4 clinder mercury capri build down under,

The firing order is 1-3-4-2
All things Capri are found at:
http://www.techcapri.com/

Hope this helps

Richard R
SE XR2 turbo

Posted on Jan 07, 2009

Ad
richrobi
  • 15 Answers

SOURCE: power windows wont work

All things Capri are at //www.techcapri.com/
The manuals are there - check them out ...
Wiring diagrams are there. Probably fixed by now anyway.

Regards
Richrobi

Posted on Jan 07, 2009

  • 1 Answer

SOURCE: I need to replace timing belt in my 1991 mercury

www.techcaori.com Has the whole capri manual that you can view using adobe reader.

Posted on Jun 09, 2009

  • 3 Answers

SOURCE: Looking for a wiring diagram

check out the service manual pdf files on techcapri.com i believe they have one there.

Posted on Sep 12, 2009

  • 1 Answer

SOURCE: looking for a service manual for a 1991 mercury

www.techcapri.com It's the 1993 service manual, but nothing major really changed, so it's the best you can get for free.

Posted on Nov 05, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Oil pressure gauge not working and it has low oil level some please explain this to me


A low oil level will cause the gauge not to work or read "low" because the sensor is designed to read pressure of the oil as it travels through the engine. Are you getting a message displayed as well ? I would start by making sure the oil is clean and at the proper level on the dipstick. If the oil level is low make sure you first fill it to the proper level then look for a leak. If the oil level is okay then it is possible the oil pressure sender could be bad. Good luck ?

Sep 10, 2013 | 2002 Chevrolet Monte Carlo

1 Answer

Why does my oil pressure gauge on dash show low oil pressure when slowing . or during long drives when using low revs


The reason would be physics based. Low pressure can go down to under 10 psi. and be okay. What you do is hook up an external gauge and measure your pressure, both cold and warmed up. Your pressure may be okay.

Aug 05, 2011 | 2000 Isuzu Trooper

1 Answer

On my 93 Dodge Caravan ES 3.3L, when it comes to a stop and idles (at a light mostly) the check gauges light comes on. When the check gauges light comes on the oil gauge is at the bottom. When I tap...


Okay What it means is that the oil in your car is either low in level or the oil pressure at low revolutions is low. I highly recommend you to stop driving the car when this happen because you can internally damage the engine with a low oil or a low pressure of oil. Check the oil level first..make sure level is fine and oil looks good. Black and burned oil will give you a low oil pressure as well. If it happen that your car need a oil change. Make sure you get it done and see if the problem goes away. Very rarely oils pressure sensor goes bad but if oil is new and level is fine you can take the oil pressure sensor and connect a tester for a oil pressure. If this is not under the manufacturer specifications.. oil pump is worn out and you have to replace it for a new one.
Good luck and don't forget to rte me. Thanks

Mar 22, 2011 | Dodge Caravan Cars & Trucks

1 Answer

I have a dodge ram van 250 1991. It seems like the reading onthe oil pressure guage on the dash has over time gotten so it is lower and lower, however, my spouse disagrees. It would be helpful to know...


Hi Harvey

this sounds correct to me, oil pressure on nearly all gauges should sit around the middle so 4 or 4.30 would be correct. Does the car have any issues at all or are you just concerned? a reading to high suggestes a blockage in the oil or "black death" as it's known in the trade this is caused by cheap oil builing up and being carbonated within the engine. the other side is when the oil pressure is low meaning the oil pump is failing and therefore not pumping to the top of the engine.

If it was mine I would be happy to say thats a healthy engine reading.

Regards and a god new year to you.
Dan

Dec 28, 2010 | 1991 Dodge Ram 350

1 Answer

I may need a new oil sender/switch for my Capri XR2. My mechanic can't find the OEM one, it's discontinued. I have found some aftermarket ones with a range of 15-100 PSI. I read that operating pressure is...


I myself would go for the pressure sensor, should be located either on the side of the block or on the side of the side of the oil pan. If you're concerned about the reading, the aftermarket sensors you mentioned should work just fine.

May 30, 2010 | 1991 Mercury Capri

1 Answer

Oil pressure really high


get the oil pressure sender and gauge checked most likley cause is incorrect reading not sudden high oil pressure

Oct 22, 2009 | 1991 GMC Sierra

2 Answers

91 Capri, no oil pressure...


the turbo booster is filled with oil and if you have no oil pressure there is no boost

Aug 27, 2009 | 1991 Mercury Capri

3 Answers

Low oil pressure after engine has heated up.


With the car warmed up, oil pressure should be 1.5 kg/cm^2 @ 800 rpm. If your not getting that much, you may want to get an oil pressure gauge (mechanics type) to check it. 8d774a8.gif Using this type of gauge will give you an accurate reading. The stock gauge may not be very accurate, especially if the sending unit is old.

7a5c4c7.jpg
a3499dc.jpg
9a6435d.jpg

Feb 10, 2009 | 1991 Nissan 240SX

1 Answer

Oil gauge reading?????


okay if you look at the oil pressure gauge the is a mark right below the "o" in oil. once the car is fully warmed up, at idle the gauge should read a little before that mark. at full throttle the gauge should be around the mark to the left of the "H"

Jul 10, 2008 | 1991 Mitsubishi Eclipse

Not finding what you are looking for?
1991 Mercury Capri Logo

Related Topics:

203 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

fordexpert

Level 3 Expert

5546 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...