Question about 1997 Ford Taurus

Open Question

I have a 2001 ford taurus and my sunroof stop working everything else works just the sunroof that is not wrking

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

chuck943
  • 783 Answers

SOURCE: Spark plug firing order Ford Taurus 2001

1-4-2-5-3-6

Posted on Apr 08, 2009

juststinks
  • 98 Answers

SOURCE: fuse box number for cig lighter for ford 2001 taurus

it should be a 15 amp fuse. the color is blue

Posted on May 19, 2009

c17hydro
  • 2984 Answers

SOURCE: how to bleed the brakes for 2001 ford taurus

Please don't forget to rate:


Bleeding The Brake System Bleeding When any part of the hydraulic system has been disconnected for repair or replacement, air enters the lines causing spongy pedal action (because air can be compressed and brake fluid cannot). To correct this condition, it is necessary to bleed the hydraulic system to ensure all air is purged.
Always begin bleeding the brake system from the furthest wheel cylinder or caliper from the master cylinder; the right rear.
NOTE: The right side of the vehicle is the passenger side. The sides of the vehicle are determined from the driver's perspective. This reference is taken from sitting in the driver's seat, facing forward.
Maintain a full reservoir during the bleeding operation. Never use brake fluid that has been drained from the hydraulic system, or from an open container, no matter how clean it is. Always use brake fluid from a new, sealed container. The front and rear reservoir will drain as the front or rear brakes are bled.

  1. Park the vehicle on a level surface. Place the vehicle in PARK (automatic) or REVERSE (manual) with the engine OFF, and apply the parking brake. Chock the rear wheels to prevent vehicle movement. NOTE: Wheel chocks may be purchased at your local auto parts store, or a block of wood cut into wedges may be used.
  2. Loosen the lugnuts from all four wheels, but do not remove the lugnuts until the vehicle is raised and supported properly.
  3. Use an approved jack and raise the vehicle high enough to place jack stands under all four corners of the vehicle. Place the jack stands under the frame or axles of the vehicle. Ensure that the front of the vehicle is raised higher than the rear.
  4. Remove the wheels from the vehicle.
  5. Clean all dirt from around the master cylinder fill cap. Remove the cap and fill the master cylinder with brake fluid until the level is within 1/4 in. (6mm) of the top edge of the reservoir.
  6. Clean the bleeder screws at all four wheels. The bleeder screws are located on the back of the brake backing plate (drum brakes) and at the top of the brake calipers (disc brakes).
  7. Attach a length of rubber hose over the bleeder screw and place the other end of the hose in a plastic jar.
  8. Have an assistant place and hold pressure on the brake pedal.
  9. Open the bleeder screw 1/2 - 3/4 turn. As the bleeder is opened, the brake pedal will travel to the floor. Have the assistant inform you when the pedal has bottomed out. NOTE: Do not remove pressure from the brake pedal once it is bottomed out. No movement to the pedal should occur until the bleeder is closed and the assistant is made aware of the situation. Failure to do this will draw more air into the system.
  10. Close the bleeder screw and tell your assistant remove their foot from the brake pedal. Continue this process to purge all air from the system.
  11. When bubbles cease to appear at the end of the bleeder hose, tighten the bleeder screw and remove the hose.
  12. After bleeding each wheel, check the master cylinder fluid level and add fluid accordingly.
  13. Repeat the bleeding operation at the remaining three wheels, ending with the one closet to the master cylinder. The pattern is, RR, LR, RF, LF.
  14. Fill the master cylinder reservoir to the proper level and install the reservoir cap.

Posted on Jul 22, 2009

  • 1146 Answers

SOURCE: I need a replacement keys for 2001 ford taurus

A good place to start is a ford dealer. Often they can cut you a key off the VIN number. You will have to go there in person., and some kind of proof of ownership would be needed!

Posted on Apr 02, 2010

csmock132
  • 4669 Answers

SOURCE: 2001 ford taurus 3.0 liter ohv serpentine belt

3.0 OHV Vin U24dba77.gif

Posted on Apr 03, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Radio stopped working in 2001 ford taurus


check your fuses for blown and engine fuses everything is tied together

Nov 09, 2013 | Ford Taurus Cars & Trucks

2 Answers

2001 Ford Taurus No Heat I am having trouble with


possibly the bled door is stuck open so only the cold air from a/c works when on defrost vs closing to allow heat to cycle through the system as defrost runs through the a/c system

Sep 18, 2013 | 2001 Ford Taurus

1 Answer

Tach almeter 2001 ford taurus


If everything else in the instrument cluster works, I would say its the tachometer. It gets a signal from the ECM.

Jun 26, 2012 | 2001 Ford Taurus

1 Answer

My sunroof in my 2001 f150 lariat only closes most of the way


Check the tracks, make sure everything is clean and lubricated.

Jun 07, 2012 | 2001 Ford F150 Styleside SuperCrew

1 Answer

2001 FORD TAURUS IDLES BAD


i recently had this issue with my 2001 taurus dohc engine. when you drive it seems that everything is fine. when you stop, the car will idle very low and somethimes shut off. there is a hose under the throttle body that is attached to the pcv valve. over time, this hose will collapse and eign to tear. i replace that hose (autozone for $10) and it solved my idling problem.

May 17, 2012 | 2001 Ford Taurus

1 Answer

My 2001 ford taurus won't start but everything is working on the insise of the car


close all the doors, lock them all with the key and then unlock the drivers door with the key and start the car that should reset the theft interlock

Feb 10, 2012 | 2001 Ford Taurus

1 Answer

Parking and backup lights quit working.everything else works including instrument lights.checked fuses and parking light relay both are good. Can someone please come up with a suggestion.


Try checking out your light bulbs in parking and backup light locations. Sometimes when one bulb goes out or just comes loose, it stops the entire circuit from operating.

May 20, 2010 | 2001 Ford Taurus

2 Answers

Radio and clock stopped working on '93 Taurus


check the number 10-fuse under the hood in the fuse box to make sure its good

May 11, 2009 | 2001 Ford Taurus

1 Answer

Stereo stopped working along with speedometer


It's probably not a fuse. It sounds like your vehicle speed sensor went bad in the transmission. The reason your radio stopped working was because your radio is probably equipped with speed sensitive volume and it requires a speed signal to work.

Apr 10, 2009 | 2001 Ford Taurus

2 Answers

I have a 1997 ford taurus and i have a bad problem...My car wiil not start. It is not getting gas to the feul injectors,my cooling fans are not working, my sunroof is not working, and when i turun the key...


check the fuse for the radio first. replace fuel filter. and get nuetral safety switch. radio adn sunroof might be related? hope this helps. fuel filter 10 dollars nuetral safety switch 30 dollars auto zone. easy fix.

Mar 31, 2009 | 1997 Ford Taurus

Not finding what you are looking for?
1997 Ford Taurus Logo

Related Topics:

153 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5474 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...