Question about 2008 Ford Escape

1 Answer

2008 FORD ESCAPE NOT GETTING HEAT BUT BLOWER IS WORKING

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

  • Contributor
  • 4 Answers

A possible cause is your heater core or an incorrect thermostat.

Posted on Feb 15, 2012

Ad

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 4 Answers

SOURCE: HOW TO INSTALL AHITCH ON A 2008 FORD ESCAPE

I have a 2007 Ford Escape Hybrid. The best hitch is the one available at your Ford dealer parts department. You cannot install a generic hitch because this is a unitized body/frame car. The Ford hitch bolts right onto existing bolts. It took me only about 2 hours to do the job. You have to cut a small square hole in the plastic bumper for the hitch to stick out.

Posted on Oct 13, 2009

Zeevert
  • 373 Answers

SOURCE: 2008 Ford Escape heater blower no longer runs in

It could be the blower resistor. While I'm not familiar with the 2008 Escape, most resistors are located near the blower motor under the dash on the passenger side. It'll have a plug with several wires, and usually 2 screws holding it in.

Posted on Aug 07, 2011

  • 84 Answers

SOURCE: ABS & traction control just went out on 2008 Ford Escape.

Chances are it is a bad ABS sensor. Need to get scanned to know for sure and which one.
Not much i know but I hope that helps.

Posted on Feb 03, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Problem answers for no heat, 08 Escape


are the heater hoses connected ?? does it have a electric motorised solonoid to open the hearter hose feed ,Sorry never seen one of these vehicles so i do not know the build/layout of components on this vehicle ,with my head in the engine bay i soon see the problem but just never seen on to know .

Jan 03, 2016 | 2008 Ford Escape

1 Answer

No heat but blower works 2008 ford escape


The inlet pipe for the heater matrix has a temperature control valve usually under the windscreen known to sieze up try that first

Nov 23, 2015 | 2008 Ford Escape

1 Answer

I just got my ignition switch replaced on my 2008 Ford Escape, and now my AC blower only works on the high position. It worked fine on 2 speed driving to dealer. Any thoughts?


Hi Joe it could be the blower motor resistor pack. It may have happened at the Garrage or could be coincidence. Regards Jim...

Jun 04, 2015 | Ford Cars & Trucks

1 Answer

What is that musty smell cming form my air conditioning and heat in my 2008 Ford escape


Either a coolant leak or water getting into the cabin.

Pull the carpet back & make sure they are not soaked,
before you diagnose thing further

Sun roofs leak onto the carpet also

Apr 23, 2014 | 2008 Ford Escape

1 Answer

2008 Ford Escape Limited- Air/Heat stopped working in all 4 speeds- Dad replaced resistor and it still does not work. Help!


replace the heater fuse/breaker and, the whole resistor set (each resistor controls a different speed on the heater fan: low,medium, high speed

Dec 03, 2013 | 2008 Ford Escape

1 Answer

2008 Ford Escape heater blower no longer runs in position 1. Works great in positions 2 thru 4.


It could be the blower resistor. While I'm not familiar with the 2008 Escape, most resistors are located near the blower motor under the dash on the passenger side. It'll have a plug with several wires, and usually 2 screws holding it in.

Aug 07, 2011 | 2008 Ford Escape

1 Answer

2008 ford escape. The climate control fan runs only on speed selection no. 4. Does not work in speed selection no. 1, 2, and 3.


the problem is most likely is the blower motor resister.the info on the 08 this still limited. but i found this.


sgm1115_68.pngsgm1115_69.png

May 04, 2011 | 2008 Ford Escape

1 Answer

2008 ford escape back outlet


check fro separate fuse in manual

https://www.fleet.ford.com/maintenance/owners_manuals/default.asp

May 21, 2009 | 2008 Ford Escape

Not finding what you are looking for?
2008 Ford Escape Logo

Related Topics:

792 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76691 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

fordexpert

Level 3 Expert

5537 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...