Question about 2007 Dodge Nitro R/T New Cars

Open Question

Remove dashboard bezel Dodge Nitro - 2007 Dodge Nitro R/T New Cars

Posted by Anonymous on

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 125 Answers

SOURCE: I have a 2009 Dodge Nitro 4X4. How do I remove the oil filter

First, I have to say that being retired profesionnally of the mecanic I have not change it by myself. However, it seems that the 4.0 L is relatively easy to replace but the 3.7 L one is located near/between front axle/differential, the harmonic balancer and masked by a bunch of hoses.
Several users reported that the factory one is hard to remove being too much tighted in place.
These things being said, depending on your mecanic experience I'm sure it 'feasible' taking maybe 45 minutes rather then 2 minutes.
My only warning will be to resist to the idea to 'break it ' with a scewdriver with the idea to pry it if it's tight in place. It's really amateur and you could really be in trouble if it doesn't work. A strap wrench is very ofter the most appropriate tool.
Assuming positively you will reach this point, make sure the previous oil filet gasket didn't stay in place and second, put some oil onto the new filter rubber gasket to make the next removal easyer. Tight strongly by hands.
Hope it will help
Sorry for my english
Dan

Posted on Dec 27, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I get in the new lug studs from here 2011 dodge nitro the gap is too small for me to get them in at an angle


Remove the brake shoes. If there is still not enough room, you may have to remove the axle.

Dec 22, 2016 | 2011 Dodge Nitro

1 Answer

How to rem ove and install climate control panel 2008 dodge ram 3500


2008 dodge or ram truck ram 3500 truck 2wd l6-6.7l dsl turbo








  • a/c heater control - removal



removal



warning: disable the airbag system before attempting any steering wheel, steering column, or instrument panel component diagnosis or service. disconnect and isolate the battery negative (ground) cable, then wait two minutes for the airbag system capacitor to discharge before performing further diagnosis or service. this is the only sure way to disable the airbag system. failure to take the proper precautions could result in an accidental airbag deployment and possible personal injury or death.






131139774












note: single zone a/c-heater control shown. dual zone similar.





  1. disconnect and isolate the negative battery cable.


  2. remove the center bezel (1) from the instrument panel and disconnect the wire harness connectors (4 and 5) from the back of the a/c-heater control (2) see: body and frameinterior moulding / trimdashboard / instrument panelservice and repairinstrument panel center bezel - removal .



note: take the proper precautions to protect the front face of the center bezel from cosmetic damage.




  1. place the center bezel on a workbench and remove the four screws (3) that secure the a/c-heater control to the center bezel and remove the control.


install------->>>>

installation




131139774












note: single zone a/c-heater control shown. dual zone similar.





  1. position the a/c-heater control (2) into the back of the instrument panel center bezel (1).


  2. install the four screws (3) that secure the a/c-heater control to the center bezel. tighten the screws to 2.2 nm (20 in. lbs.).


  3. connect the wire harness connectors (4 and 5) to the back of the a/c-heater control and install the instrument panel center bezel see: body and frameinterior moulding / trimdashboard / instrument panelservice and repairinstrument panel center bezel - installation .


  4. reconnect the negative battery cable.


assuming this is the correct application for your vehicle, you should be good to go. let me know if you need further assistance.

-tim

autoecu1

800-921-9060

Jan 21, 2015 | Dodge Cars & Trucks

1 Answer

2008 dodge nitro dashboard light looks like exclamation point


Mine was on because I forgot to turn my handbrake off and I was driving

Oct 08, 2012 | 2008 Dodge Nitro

1 Answer

Do i need some tool or something to get door panal of 2007 dodge nitro not like old school with push clips @ edges


  1. Remove door trim and the trim bezel. - 6
  2. Take off the fastener from around the door handle trim - 5,4
  3. Now you nee to remove the cap and screw covers with a panel tool or a small screwdriver. 3,4
  4. Turn out the screws off the door trim. 2,4
  5. Remove the window switch and unhook the connector.
  6. Remove the trim panel from the 4 way around the handle of the panel trim. 4
  7. Now gently lift up on the door panel and out.
  8. See diagrams for further help as well.
  9. Hope this helps.


ironfist109_130.jpg

ironfist109_131.jpg


Regards, Tony

Jun 09, 2011 | 2007 Dodge Nitro R/T New Cars

1 Answer

How can I replace dashboard bulbs on a 2005 grand caravan?


You must pop up the lower bezel cover first. Lift at the front towards the steering column. Lift up easy from the seat side only, theres 2 clipss that can be broken on the dash side. After poping up slide towards you. Remove the 4 screws holding the round bezel. Remove bezel towards you.Remove 4 screws that hold the instrument cluster. Tilt the cluster to remove. Blubs are PC74. Remove bulbs by turning counterclockwise.

Feb 02, 2010 | 2005 Dodge Grand Caravan

1 Answer

How can i replace a burned bulb in the dashboard on a 1999 dodge caravan


The bezel around the dash should have 2-4 screws holding it on. Once these are out, the bezel should come out maybe with a small screw driver to pry behind bezel. After this removed there will be 4-6 screws around the gauge cluster, remove these and your cluster will come out, your bulbs are on the back of the gauge cluster.

Jan 18, 2010 | 1999 Dodge Caravan

2 Answers

Where is the oil filter on a 2007 dodge nitro v6


You can access the oil filter easily from underneath next to the front, driver-side wheel at the front of the engine. There is clear access to the filter there.

For more info on Dodge Nitro, visit the forum at
http://www.dodge-nitro.com/dodge-nitro/

Aug 08, 2009 | 2008 Dodge Nitro

1 Answer

Dashboard Gauge


  1. Disconnect and isolate the battery negative cable.
  2. Remove Over Steering Column Bezel Replacement.
  3. Remove over steering column bezel.
  4. Remove left end cover.
  5. Remove screw at left end of cluster bezel and headlamp switch.
  6. Remove screws holding cluster bezel to instrument panel from each side of steering column.
  7. Disconnect clip holding cluster bezel to instrument panel from above right vent louver.
    1. Separate cluster bezel from instrument panel.
    2. Disconnect wire connectors from back of the bezel.
    INSTALLATION
    1. Connect wire connectors into back of the bezel.
    2. Place cluster bezel in position on instrument panel. Use care not to place hands on louvers.
    3. Connect clips to hold cluster bezel to instrument panel. Use care not to add pressure on the A/C louvers to seat the cluster bezel clips.
    4. Install screws to hold cluster bezel to instrument panel on each side of steering column.
    5. Install screw at left end of cluster bezel and headlamp switch.
    6. Install left end cover.
    7. Install over steering column bezel.
    8. Install lower steering column cover.

    I wouldnt Recomend This Procedure To Anyone juse for Cleaning Purposes Unless Your VIEW OF IT IS "SERIOUSYL IMPARED IF it Moisture Has Accumilated Behind Face of it Then Find Out WHY and Resolve THAT PROBLEM FIRST Onherwise Here you Are. Have A Great DAY !! And Please Dont forget to RATE Me Thank You !

Jan 15, 2009 | 1999 Dodge Caravan

Not finding what you are looking for?
2007 Dodge Nitro R/T New Cars Logo

Related Topics:

69 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7754 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...