Question about 1989 Suzuki Samurai

1 Answer

Transfer case has been stuck in nutral we fixed the problem but at the end of the shifter were it is in the transfer case is the a bush that gose right on the end because there is a lot of slap

Posted by on

  • yadayada
    yadayada Feb 14, 2012

    I have no idea what the problem is by the current discription posted above, please rethink about what is wrong and write it in clearer terms. Thanks so darn much!

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 138 Answers

The original shifter bush (shifter sheet) is made of nylon and after 20 years of sitting in oil they crumble away and disappear.
Replacement is cheap and easy.

Posted on Jan 04, 2014

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

tunde007
  • 2382 Answers

SOURCE: hi i have a 94

Hi, am pretty sure it would be almost impossible to get the workshop breakdown page of the transfer case you are requesting for because such parts are not normally displayed in the manual except you get a auto mechanic specialized in Suzuki to help out.
You can also contact Haynes on 1-800-242-4637 to see if they can help out with the manual..

Posted on Sep 26, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

TRANSFER CASE REBUILT SAME PROBLEM 2H GOES INTO NUTRAL WHEN ACCELERATION


is the shifter bent or is the spring on the side of the shifter broken on the out side

Oct 12, 2015 | Cars & Trucks

1 Answer

Transfer case stuck in neutral


take the 4 wheel drive shifter out, and follow it down, open up ur transfer case and you can will see your shifterforks, order a shifter sheet bushing for around $20 and install it. you can do all this without taking the transfercase off of the sami and it should take around 30 minutes to tear it down, put in the bushing, and put it all back together.if you dont understand that, heres a linkhttp://zukioffroad.com/Tech_Library/tcase_shifter_bushing.shtml

May 01, 2012 | 1987 Suzuki Samurai

1 Answer

Need breakdow drawing of a 1986 suzuki samurai 4x4 transfer case it lock up in 4 low and u can t get it back in 2wd


Go to www.trailtough.com and order a new shifter sheet. Your shifter bushing (called a shift sheet) is bad which allows the shifter to drop and miss the shift rails. It is a 15 minute fix, and a $3.50 part.

Mar 02, 2011 | 1986 Suzuki Samurai

1 Answer

95 Buick Riviera will shift into reverse but not nutral or drive the shifter feels stuck.


Worn bushings or linkage may be the issue due to age. There are many wear points. Can you do it without car running? If so it may be a transmission issue.

May 20, 2010 | Buick Riviera Cars & Trucks

1 Answer

1991 S10 blazer 4x4 4.3 popping coming from the front


the popping sound is the stabilizer links or the lower control arm bushings you can replace all bushings and both link kits for around 50.00 and the light is prob from the sensor on the transfer case or the front end i would remove and clean with dawn dishwashing liquid and put them back.

Jun 23, 2009 | 1991 Chevrolet S-10 Blazer

1 Answer

My truck is stuck in 4LO and it won't come out of 4LO.


Likely either a shifter position sensor, transmission position sensor, or a differential position sensor. Had same issue w/ my Montero and it ended up being one of the 5 sensors on the transfer case. It was pretty tough to get to, so replaced all 5. That fixed it.

Jul 16, 2017 | 1998 GMC Jimmy

1 Answer

Jeep stuck in 4 wd and transfer case shifter moves about freely


OK, simple problem, and a quick fix...  (And I consider changing my own oil to be the extent of my automotive education.)  I had this happen today.  A little online research from the jeep community showed me the external cable that connects your 4WD knob with the arm on the transfer case is held on that arm with a plastic clip that is fond of disappearing.  
When the jeep cooled down, I crawled under, found the cable end hanging freely, and simply set it back on the arm.  With no clip it will pop off again, but it allowed me to shift back to 2WD and roll home.  I understand a zip tie will keep it in place until you get a 3/16 nut of some sort.  (Can't be more specific about the nut yet, I'm waiting for more info.)  
It was a relief to find out that I didn't need to have anything done with the transfer case, etc...  If you show the dealer the problem, I'm told they often want to replace the whole cable, as the clip comes as part of the whole.  Waste of time and $$$, and I canceled the appointment with the dealership when I learned the simplicity of the problem.  

Jun 02, 2009 | 2008 Jeep Wrangler

4 Answers

Transfer is stuck in a neutral on a 1988 samurai


check your gear oil if that is fine then its your shifter guides they are more then likley wore out i had the same problem in my 87 zuk you can buy a rebuild kit for around 75 bucks

Feb 22, 2009 | 1987 Suzuki Samurai

1 Answer

Suzuki sj 410 transfer box jammed


The thing to do to get it unjammed now is to remove the transfer shifter biushing and then replace it.  Remove the cover, then the boot, then depress and rotate the retaining ring (can be done with needle nose pliers inserted nose-down).  Then pull out the black rubber ring, wipe it off, then reinstall everything.  Get the transfer case into some gear and get back home.  When you get back home buy a new transfer case bushing from somebody like Suzuki John on Ebay.  The new bushing will fix the problem.

Oct 16, 2008 | 1986 Suzuki Samurai

2 Answers

Transfer case


you will have to take the shifter out of the transfer case,remove the shifter bushing, then look down into the transfer case.you will need a flash light,you will see the ends of two rods that have slots in them.take a long screwdriver and move the rods so the notches in them are even with oneanother.the rods will slide back and forth.once the notches are lined up you can shift your tranny.the bushing needs replacing in the shifter on the transfer case.look on EBAY and you will find them.

Sep 10, 2008 | 1987 Suzuki Samurai

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

85 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Boyet Soriano
Boyet Soriano

Level 2 Expert

293 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...