Question about Cars & Trucks

1 Answer

Feul presher reglater - Cars & Trucks

Posted by on

  • yadayada
    yadayada Feb 14, 2012

    Do you mean "FUEL PRESSURE REGULATOR" Very creative spelling.

  • Jeremy W.
    Jeremy W. Feb 14, 2012

    year, make, model, and engine size. Fuel pressure regulators are usually fairly simple to replace. I will need the above info to help you further.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Cars & Trucks Master
  • 5,332 Answers

On a 97 5.7 liter the regulator is located on the CPI unit under the upper plenum. The upper plenum will need to be removed from the engine in order to gain access to the regulator.

Basically you will remove the metal fuel lines from the top of the engine. Unplug all the connectors. remove the throttle cables, disconnect vacuum lines, unthread EGR pipe, and remove the bolts holding the plenum in place.

Posted on Feb 14, 2012

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Oil presher guage .polarity .wires hooked right new guage new sender .sender wire off guage goes behind o its suposto peg doesnt


you need a new sending unit and stop unplugging things when there is power to them,you can ruin it

May 04, 2015 | Cars & Trucks

1 Answer

Feul raglator were is it located o3 deville


The fuel pump will still be working after the engine starts as it is required to produce fuel pressure for the engine to run under all load conditions. How hard it runs is determined by the load and rpms. If the regulator is faulty there will be problems with starting and performance. However it would be advisable to have a pressure test done on the fuel manifold to check the pump, regulator and filters

Dec 04, 2013 | 2003 Cadillac Deville

1 Answer

Where is the feul pump relay located on 1992 s10?


Here's where it's at. here's what it look's like.

Feb 17, 2013 | Cars & Trucks

1 Answer

Put in a fuel pump and fuel filter and now have no pressure in the fuel rail


I dont know the year so it is difficult to be specific.Is there enough feul in the tank for the feul pump to pick up.Some feul filters have the same connections on both sides and can be installed backwards, this will cause a restriction because feul will only flow one direction.Can you open the feul cap and hear feul pump turn on for 3 seconds when the ignition switch is cycled.Let me know if i can help?

Feb 09, 2011 | Cadillac DeVille Cars & Trucks

1 Answer

1991 corolla oil light is flashing


dont run your engine till you have the oil presher checked out,,,if it is low on presher you will burn out your motor,,,change the oil presher switch it could have gone faulty

Nov 28, 2010 | 1991 Toyota Corolla

1 Answer

2006 chevy trailblazer


have the presher switch checked out it could be faulty,,dont drive the car or run the engine till you know you have oil presher,,,your engine wont live very long without oil presher,,,only minuets at best!!!

Jul 13, 2010 | 2006 Chevrolet Trailblazer

2 Answers

The light and buzzer comes on for oil pressure but oil is fine and pressure is good how do i turn it off


you dont,,,,first replace the oil presher sender switch if the oil light and buzzer are still on then use an oil presher gauge to check that there realy is oil presher in the engine if there is presher look for a fult in the wireing

Feb 23, 2010 | 1988 Volkswagen Cabriolet

1 Answer

Engine warning light has come on


ok what warning light come on???? oil or charging light,,,if its the oil light i gess there is no oil left in the engine or there is no oil presher,,,in witch case the engine is shot away,, if its just a charging light my gess is the hight presher water jet shot water inside the altornator it may dry out but if its got oil inside of it then you need to get a new one fitted or strip your down and clean it all out, using hight presher water hoses is a big mistake

Feb 11, 2010 | 1984 Oldsmobile Omega

1 Answer

Stalls upon acceleration and back fires during engine speed.


check your fuel presher . mazda have a high fuel presher,

Apr 20, 2009 | Mazda B2200 Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

54 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...