Question about 1999 Mercury Sable

1 Answer

Heater doesn't work

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Mercury Master
  • 5,332 Answers

Make sure the coolant level is full in the reservoir.

If the coolant level is good feel the hoses that go to the heater core back by the firewall. If one is cold and one is hot that the heater core is plugged. I have had fairly good success back flushing the heater cores and getting them to work. If back flushing does not work than the heater core will need to be replaced. The entire dash will need to be removed to do this.

If both the hoses are hot than it may be the blend door actuator. You should hear a distinct difference in the air flow from the vents by moving the heat control from full hot to full cold.

The last thing is the t-stat could be stuck open. If this where the case than the temp gauge will also be reading low.

Check those out and let me know what you find.

Posted on Feb 14, 2012

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2005 dodge durango front heater/ac blower motor doesn't work


Check fuses and relays. On relay just switch with one you no works.

Feb 20, 2013 | 2003 Dodge Durango

1 Answer

Automatic temperature control it's bad burn on me, I order a used "ATC" automatic temperature control and still doesn't work check the fuses and relays still doesn't work


There should be some kind of valve that controlls the actual amount of coolant running through the heater core and there for controlls the temp. There may also be a door that might be stuck that controlls the amount of air traveling through the heater core.

Jan 31, 2013 | Cars & Trucks

1 Answer

Blower for the heater doesn't work


most likely you had a bad resitor they go bad on gm all the time also check your fuses frist

Dec 01, 2012 | 2002 Buick LeSabre

1 Answer

The heater doesn't work


your heater doesn't work any more

Apr 23, 2012 | 1994 Opel Astra

1 Answer

Heater blower motor doesn't run


check under your dash by the fuse box might be there

Mar 24, 2012 | 1998 GMC Sierra

1 Answer

Heater doesn't work


which heater? cabin heater or heater plugs

Mar 03, 2012 | Honda Pilot Cars & Trucks

1 Answer

99 ford mustang 6 cylinder. Recently i had to add antifreeze to my car couldn't find the radiator drain to take some of the water out so i loosened the lower coolant hose to drain some out after...


replace any soft hoses.
collapsed hoses cause water flow constriction
.that increases temp fast

to bleed air out of the system . if no air bleeder as such
with heater on full .-engine running
loosen the bypass pipe for the closed thermostat till only coolant flows no air bubbles
check if
the engine cooling fan spinning fast enough
the water pump in good condition
the interior directional flaps motors or actuators working

Apr 01, 2017 | 1999 Ford Mustang Cobra

1 Answer

I have numerous proglems. I have a 2000 intrique. The right back signal light blinks very fast, doesn't work in the front. The ac blower works fine but blows warm air.A mechanic , someone my hysband...


Your rear turn signal flashes fast because the front is not working. Most likely you have a burnt out bulb in the front. If your A/C compressor can be turned over by hand and doesn't lock up or make any clanking sounds it's probably alright. The compressor will not run if the system is low on refrigerant. If you're having problems with the A/C and heater controls, that would be the first ting to repair. It doesn't sound at all like any electrical problems.

Jul 20, 2011 | 2000 Oldsmobile Intrigue

2 Answers

Temperature gauge fluctuates and the heater blows cold air


Definitely check your fluid level in your radiator. Top it off all the way. I've seen that happen multiple times on cars that were low on anti-freeze. If that doesn't work try replacing your thermostat. It's cheap and the easiest place to start if topping off the fluid doesn't get you fixed up.

Oct 16, 2009 | 1997 Chevrolet Camaro

Not finding what you are looking for?
1999 Mercury Sable Logo

198 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

fordexpert

Level 3 Expert

5546 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...