Question about 1999 Plymouth Neon
Check the spark output at the coil. If there is still weak spark than make sure there is 12 volts to the coil. If there is than the coil is probably bad.
Also make sure the engine is turning over properly. If the battery is low or the starter is drawing to many amps than there may not be enough power left over to deliver enough spark from the coil.
I’m happy to assist further over the phone at https://www.6ya.com/expert/jeremy_d728a59f986299fa
Posted on Feb 14, 2012
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
shoot some starting fluid in the air intake and try to start again. If it starts you have a fuel problem. If still no start could be an ignition problem.
Posted on Apr 08, 2009
SOURCE: 1999 plymouth neon fuses
Start by checking for a wire shorting to ground if that checks good you will need to go thru the circuit and check the amp draw at each component, fuel pump,ignition coil,ect. until you find the bad part
Posted on Jul 25, 2009
have to remove the fuel tank to pump combustible.Desconecta change the battery, disconnect the hoses that are in the tank. and you can pump out. Thanks
Posted on Feb 26, 2010
Tips for a great answer:
Jan 11, 2015 | 1999 Plymouth Breeze
Nov 29, 2013 | 1997 Plymouth Voyager
Aug 05, 2012 | 1999 GMC Jimmy
i got 3.0 v6 1999 plymonth voyger i have fire fuel weak spark coming from the disstrubider check engine light dosnt come on is it crank sencor or timing belt skiping time.
May 27, 2012 | Plymouth Voyager Cars & Trucks
Dec 16, 2011 | 1999 Plymouth Voyager
Jun 08, 2011 | 1999 Plymouth Voyager
Apr 08, 2011 | 1999 Plymouth Neon
Mar 17, 2011 | 1999 Plymouth Neon
Feb 23, 2011 | 1999 Lincoln Continental
Oct 04, 2009 | 1995 Plymouth Neon
197 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: