Question about 1996 Ford Crown Victoria
This problem is caused by a heat damaged headlight switch and the connector to it, replace both parts, the connector is available as a repair part as well as the switch. When you replace the connector (A MUST DO!) SOLDER IT ON, NO SPLICE CONNECTORS! Shrink tube the connections. If you don't replace both parts then the new switch will quickly fail again and back to blinking headlights.
Posted on Feb 14, 2012
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: HEADLIGHT FLICKER THEN SHUT OFF
check to ensure the connection is secure at the light socket itself even jiggle the connection to ensure this dirt etc may cause a faulty connection ...also is this just one or both headlights
Posted on Sep 12, 2009
Sounds like the multifunction switch. Try working the hazard switch up and down a few times to see if you get some lights to work. If so then replace the switch.
Posted on Nov 09, 2009
SOURCE: where do put antifreeze in
Goes in the overflow tank, see if there is not a small petcock on the bottom of the radiator so you can drain some old stuff out when it is cold.
Posted on Oct 28, 2010
Tips for a great answer:
Jun 11, 2013 | 1996 Ford Crown Victoria
Mar 13, 2010 | 1996 Ford Crown Victoria
Nov 09, 2009 | 1996 Ford Crown Victoria
May 26, 2009 | 1996 Ford Crown Victoria
Apr 01, 2009 | 1998 Ford Crown Victoria
Aug 05, 2008 | 2005 Ford Crown Victoria
221 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: