Question about 2005 Audi A3
I need to replace the window switches from the drivers door panel
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
You need to look Very closely, on the underside of the handles, for small, 'hidden' fixings to release the switch gear.
The card itself,is hooked onto the door.
So there aren't too many screws actually holding it all together.
Good luck with that.
Posted on Aug 01, 2009
On the inside trim, you can remove screws (these screws may be covered by filler pieces or may be visible, or they may require you pry a plastic piece off that covers the screws) that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls.
Posted on Oct 30, 2009
if hinges are in good order, then ,with the door ajar "adjust" by grabbing hold of the bottom of the door edge and lifting upwards a little at a time to get correct fit,a common problem with heavy doors nowadays....
Posted on Mar 18, 2010
- Door trim.
- Unclip decorative panel -2-.
- Remove decorative panel -2- toward front.
- Remove bolts -3- (3x) from door trim -1-.
For vehicles with electric window regulators
- Window regulator switch, removing and installing Page 70-25 .
For vehicles with manual window crank
- Manual window crank, removing and installing Page 70-26 .
For all vehicles
- Unclip door trim -1-. Replace damaged clips Fig. 3
- Raise door trim -1- upward approx. 20 cm. out from door shell.
- Disengage Bowden cable for interior door mechanism Fig. 1 .
- Disconnect electrical harness connectors Fig. 2
Posted on Dec 03, 2010
Tips for a great answer:
Feb 04, 2017 | 2006 Audi A3
Oct 10, 2015 | 2009 Audi Q7
Nov 22, 2013 | Cars & Trucks
Nov 09, 2013 | Audi A3 Cars & Trucks
Dec 03, 2010 | 2005 Audi A3
Apr 26, 2017 | 2006 Audi A3
Oct 30, 2009 | 2005 Audi A3
Aug 01, 2009 | Audi A3 Cars & Trucks
Mar 01, 2009 | 2003 Audi A4 Cabriolet
318 people viewed this question
Usually answered in minutes!