Question about 1983 Ford Econoline

1 Answer

Freeze plugs ford econoline 150

How do you replace freeze plugs on 1980's model ford econoline 150 van? Do you have to pull engine? How long should this repair take?

Posted by on

  • 3 more comments 
  • vtasc13 Oct 25, 2008

    Need help with a ford van !!


  • Anonymous Mar 13, 2014

    what problems could arise if you replace the engine?

  • Anonymous Mar 14, 2014

    Cambio de bujias van econoline 150

  • Anonymous Mar 28, 2014

    I need to remove engine cover on 1996 ford econoline van

  • Anonymous Mar 28, 2014

    where are relays on ford econoline van

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 153 Answers

The freeze plugs can be fixed with the engine in the veicle. There are some rubber plugs available that have a bolt thru the middle. Pry out failed plug, push in rubber replacement, tighten bolt to expand rubber. Fixed.

Posted on Oct 25, 2008

  • rocsal
    rocsal Jan 20, 2014

    replace cable on trasmission

  • rocsal
    rocsal Jan 20, 2014

    can i just add oil to it

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to replace the spark plugs on 2006 E 150


MOST VANS HAVE A HUMP INBETWEEN THE SEATS UNDER THE DASH! THERE SHOULD BE A LATCH ON EACH SIDE OF THIS HUMP, THAT WILL LET YOU GAIN ACCESS TO THE ENGINE FROM INSIDE THE VAN! FROM THERE YOU CAN REPLACE THE PLUGS!

Mar 05, 2011 | 2006 Ford Econoline Cutaway

1 Answer

We have a 1989 ford 150 van 351 and it idle very


idle air control valve needs replaced loaded up with carbon

Apr 23, 2010 | 1988 Ford Econoline

1 Answer

HOW TO INSTALL SERPENTINE BELT ON 87 FORD VAN


For the 1987 Ford Econoline Van:
Size Engine??
Engine Options (AC/No AC)??

Click on the following direct, Free Link. It has the Serpentine Belt Diagram for your 1987 Ford Econoline Van depending on your size Engine and Engine Options.

Let me know if this helped....

http://www.2carpros.com/car_repair_information/year/1987/make/ford/model/econoline/1987_ford_econoline_drive_belt_routing_diagram.htm

Apr 14, 2010 | 1987 Ford Econoline

1 Answer

How can i replace a freeze plug on a ford e150 van . this particular plug is on the psssenger side and in the middle. its also blocked by a bracket from underneath.


I would get a long punch, pound the old one into the engine, and install an expandable frost plug in it. If you don't have room to work, , remove or loosen the bracket

Jan 06, 2010 | 1983 Ford Econoline

1 Answer

Heater motor not working, checked fuses none,ford van


Probably the resistor plug located under the dash.

Dec 29, 2009 | 1989 Ford Econoline

1 Answer

2002 econoline van Check engine light on. Code: P0307. Has to deal with spark plugs. Fix???


that is a number 7 misfire. try replacing the plug and coilpack. you can also swap coilpacks with another and see if the code changes. I am assuming its a 4.6 or 5.4 engine. you can get away with just the coilpack and dont forget the boot also. get only oem ford parts. probably cost about 120-150 dollars. did water get in it? can you erase the code or is it a hard fault? I try with info I have,sorry

Jul 14, 2009 | 2002 Ford Econoline Cutaway

1 Answer

94 econoline 150 van dont start


may be your fuel nozzles are clogged did you checked tham ? or may be your fuel filter is clogged that prevents sufficent amount of fuel comming to your engine

May 31, 2009 | 1994 Ford Econoline

3 Answers

How much oil in my van


5-6 quarts if empty.

May 31, 2009 | 1994 Ford Econoline

1 Answer

Got a PO118 code for my 1996 ford Econo 150 van.


I work for Ford and have never seen this code, but the sensor must be on the fuel rail on the top of the engine, vans have a hot stall/hessitation issue from vapor lock, maybe this is part of the fix.

Mar 24, 2009 | 1996 Ford Econoline

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

481 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

70374 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Ron Lankford

Level 3 Expert

5386 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...