Question about 1994 Mazda MX-3

Open Question

1994 mazda se v6 dies when taken off the oil cap

Posted by Anonymous on

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

GARYca
  • 672 Answers

SOURCE: consume too much gas after replacing spar plugs, wires, cap

were the plugs properly gapped?? If it was, I would recommend checking the distributor for proper adjustment, timing may be off. Have this checked by a mechanic. Hopefully this helps

Posted on Aug 16, 2009

  • 357 Answers

SOURCE: 1994 Mazda B3000 V6 engine

Failure of head gasket between cylinder head and block.

Because oil pressure is higher than coolant pressure, oil will creep across poor sealing area of head gasket from the oil riser drilling that feeds the cylinder heads cam assembly's.

Worst case scenario would be a cracked cylinder head/s. No totally unheard of but rare.

Continued oiling of the coolant system will rot out the coolant hoses from the inside to the point they will burst.

Due to the year of this engine it may be prudent to find a used engine with less miles and swap it out.

Posted on Jan 19, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1994 MAZDA 929


Buen dia,
tengo un mazda 929 del 93 y se comporta bien en Bogota (Colobia) pero al salir a poblaciones mas bajas(clima calido) me da problemas de recalentamiento cuando estoy de vuelta a Bogota (al subir). Ayuda!!!!

Mar 03, 2013 | Cars & Trucks

1 Answer

Type of engine oil?1994 plymouth voyager v6


API SG or SG/CD look on the Cap or Label of the Oil Container (Quart, Gallon, or 5 Quarts).
10W 30 for Winter.
10W 40 for Summer.
V6 3.0L gets 4.0-quarts.
V6 3.3L and 3.8L gets 4.5 quarts.
Always change Oil Filter with the Oil Change.
Let me know if this helped or if you have additional questions or information. Feel free to contact me at FixYa.com!

Jan 12, 2010 | 1994 Plymouth Voyager

1 Answer

Intalling timing belt


i saw some marks on the motor but i not sure that they are the marks that i need to synchronize with the pulleys. could you send me the diagram? thanks.

Dec 17, 2009 | 1994 Mazda 626

1 Answer

Just wanted to change the #6 sparkplug how do i do this it seams hard to get to from thr top 1996 pontaic bondiville v6


to give more room - the motor cover can be taken off by unscrewing oil cap out of front valve cover - reach across or lay across motor to reach rear plugs

Sep 19, 2009 | 1996 Pontiac Bonneville SE CA Value

2 Answers

Consume too much gas after replacing spar plugs, wires, cap


timing will need to be readjusted!
Then the air fuel mixture!
Cheers Rob

Aug 16, 2009 | 1994 Mazda MPV

2 Answers

What type of oil use the mazda 6 2004 v6


most cars now uses 5W - 30 for cold weather OR 10W-30. for hot weather. dont use synthetic oils it will void your warranty.

Jul 04, 2009 | 2005 Mazda 6

1 Answer

Mazda 626 with no spark


be for you dig to deep into something like that take off the distributor cap and then pull off the rotter and check your connection at that point. that part might have to be changed

Mar 23, 2009 | 1994 Mazda 626

1 Answer

I cannot find themostat on 1994 mazda 626 2.5liter v6 engine


The thermostat is located on the front left of the motor facing the radiator(Almost directly below the radiator cap). The lower radiator hose is attached to the thermostat housing.

Mar 21, 2009 | 1994 Mazda 626

1 Answer

1992 Mazda MX 3 V6 wont start


replace the oil cap and try again you may have to hold it to the floor the first time untill it starts

Mar 19, 2009 | 1992 Mazda MX-3

Not finding what you are looking for?
1994 Mazda MX-3 Logo

Related Topics:

27 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8152 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...