Question about 2008 Toyota Yaris

Open Question

Hazard lights not working on toyota yaris 2008 model

Because the hazard lights are not working, neither are the flashing indicators when using remote central locking key.

Posted by Anonymous on

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 88 Answers

SOURCE: remoe dont lock or unlock the doors. hazard lights, indicators and horn dont work.

You might have a blowen fuze. I would check that first. If it is blowen and continues to blow after replaceing it, then you have a short somwere in the wiring.

Posted on May 19, 2009

  • 1 Answer

SOURCE: yaris 2003 remote control lock problem

You need to reprogram the remote. Please se this website:
http://toyotaownersclub.com/forums/index.php?showtopic=85266

Posted on Oct 12, 2009

  • 163 Answers

SOURCE: my toyota 2007 yaris 4dr sedan keyless entry not working

they may need to recode your pad see dealer

Posted on Dec 30, 2009

  • 136 Answers

SOURCE: how to remove 2008 toyota yaris rear bumper

Go to this site. http://www.yarisworld.com/forums/showthread.php?t=33767

Further down you will see a diagram of the bumper removal.

remove the two bolts under the hatch, the four plugs along the bottom edge, and the plate light. Don't forget the red circle clip or bolt on the diagram. Then you just pull it off.

Posted on Dec 01, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi I'm driving Toyota yaris 2009 hatchback when i indicate it makes hazards please help


Make sure your actual hazard switch is off and try again. If you still have issues the problem is probably in the hazard switch.09 yaris hazard switch 2016 Toyota Yaris Hazard Warning Switch Lock switch Steering Part...

Feb 20, 2017 | Toyota Cars & Trucks

1 Answer

How & where do you remove fuel filter yaris yr 2008


Toyota has not used fuel filters since 2004 in most models.
The only filter you have is a small screen before the pump inside the tank.

Feb 14, 2013 | 2008 Toyota Yaris

1 Answer

P/s indicator light on


The power/steering indicator light definitely tells you of a problem...the easiest would be a "low fluid" indication...Check without car running...view proper fill line...also if this fixes the indicator light, you need to monitor the p/s fluid level for a few days to assure no leaks...Be sure to use the proper p/s fluid for your Toyota...some fluids have a "stop leak" additive which works well too. Hope this helps.

Mar 14, 2012 | 2008 Toyota Yaris 1.5

2 Answers

How to remove 2008 toyota yaris rear bumper


Go to this site. http://www.yarisworld.com/forums/showthread.php?t=33767

Further down you will see a diagram of the bumper removal.

remove the two bolts under the hatch, the four plugs along the bottom edge, and the plate light. Don't forget the red circle clip or bolt on the diagram. Then you just pull it off.

Nov 30, 2011 | Toyota Cars & Trucks

1 Answer

I have a 2008 Toyota Yaris, I just had the oil changed and I need to turn off my check engine light they did not do it where i got the oil changed. I have done it before but cant remember how??


Instructions
    • 1 Insert the key into the ignition. Turn the switch to the "On" position.
    • 2 Press the odometer reset button repeatedly until "Trip A" is displayed.
    • 3 Turn the ignition to the "OFF" position.
    • 4 Press and hold the odometer reset button. Turn the ignition switch to the "ON" position.
    • 5 Release the odometer reset button after the indicator displays "000000." The maintenance service light turns off.


Read more: How to Reset the Maintenance Service Light on a Toyota Yaris ' eHow.com http://www.ehow.com/how_7211378_reset-service-light-toyota-yaris.html#ixzz1QfXJpIaWI do hope you meant the maintenance required light and NOT the check engine light as you said.

Jun 29, 2011 | 2008 Toyota Yaris Sedan

1 Answer

I have a maitenance requried light on in my 2008 Toyota Yaris


my toyota's light comes on every 5000 miles . It's to let you know it's time to change the oil

May 05, 2010 | 2008 Toyota Yaris Sedan

1 Answer

2006 Toyota Sienna Taillight will not work I had remote start installed and when you remote start the tail light and parking light will flash indicating car is remote started. Problem: When I put the key...


Bypass the fuse? Bypassing a fuse is a fire hazard in the first place. When they worked on that everything should work normally plus the added feature. Not compromising anything. Take it back there and have it done properly or put it back the way it was, and have it done somewhere else. You work hard for your money so you deserve a good job on your car.

Nov 14, 2009 | 2008 Toyota Sienna

1 Answer

Yaris P/S light and Ignition


Car is covered by a 3 year warranty, return to supplying dealer before attempting any fixes yourself. Power steering is electric on these cars, I'm guessing it's something simple like the battery.

Mar 14, 2009 | 2008 Toyota Yaris

Not finding what you are looking for?
2008 Toyota Yaris Logo

Related Topics:

86 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7782 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...