Question about 2000 Mercury Sable
How do you get at the radiator to flush out and put in coolant, in a 2000 mercury sable.
Posted on Jan 25, 2009
Go thru a process of elimination....check the fuse-check the relay-check the plug for the fan and if its connected
Posted on Oct 24, 2008
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Sep 11, 2011 | 1999 Oldsmobile Intrigue
Physically look in the radiator under the cap(if one exsist's) when cool, for coolant level, and check the valve in the cap for sticking. If air is present in the radiator it can't get out, and more coolant can't get in,(from the overflow). Either clean the cap or replace it and check that it is the CORRECT cap.
If radiator is low on coolant fill it to overflowing, replace cap, and check that coolant overflow is filled to the COLD line or mark. The overflow is normally where you would add coolant. (never overfill the overflow)After refilling as outlined above, check the level every morning for 2 or 3 days until coolant level stops dropping below the cold mark and add coolant to the overflow ONLY. Do not open the radiator cap. Also, if you have even a tiny coolant leak anywhere in the system, air will get drawn in, instead of coolant from the overflow.
For more OVERHEATING PROBLEMS try these...
Radiator fins dirty, clean with a strong stream of water, not high pressure water.
Radiator clogged, try backflushing it, or replace.
Thermostat stuck open or shut, replace it.
Water pump worn out, can no longer move enough coolant, replace it.
Fan shroud broken or missing....
Electric Fan(s) not working, Check the fan, relay, fuse and engine temperature sensor's.
Belt driven fan, belt slipping, fan clutch is bad, fan blades have flattened out.
Air dam under front bumper is gone, loose, or broken. It actually has a purpose other than scraping on the driveway or curbs. It forces air up into and thru the condenser and radiator. If it's loose, airflow can actually push it out of place making it useless or blocking the airflow. Along with that, there may also be a plastic piece attached to the bottom of, and wraps up behind the bumper. If it
Aug 28, 2011 | 2001 Chevrolet Cavalier
Aug 04, 2011 | 1999 Oldsmobile Alero
Aug 01, 2011 | 1994 Cadillac DeVille
Jul 17, 2011 | 1999 Oldsmobile Alero
Jan 25, 2011 | 1999 Volkswagen Jetta
Nov 28, 2010 | 1996 Toyota Avalon
Sep 04, 2009 | 2007 Ford Escape Hybrid FWD
308 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: