Question about Plymouth Laser

1 Answer

My 93 plymouth laser wont start - Laser Plymouth Cars & Trucks

Posted by on

  • jerry nunya Feb 16, 2012

    thank you for your input ! you mentioned a fuel pump relay, any chance you would know were that is located on the 93 plymouth laser

  • jerry nunya Feb 16, 2012

    also i have no spark i changed the ecm, that didnt help

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Plymouth Master
  • 75,117 Answers

If a starter is able to crank the engine but it won't start you usually have either an electrical or fuel problem. It's also remotely possibly that it's compression.

If an engine has proper fuel, spark and compression, it will start when you crank it. So your challange is to find out which part isn't working right. Start with fuel. Spray a little starting fluid into the air intake while someone tries to start the engine. If it starts briefly when you're spraying starting fluid, you probably have a fuel delivery problem. That could be injectors, fuel pump, fuel filter, relay, fuse... who knows what until you check into it.

If it doesn't start with starting fluid, check the spark. Pull a plug wire and attach it to a spare sparkplug and set the plug on a solid metal part of the engine. Have a helper crank the engine while you watch the plug. If you have a good spark, it might just be out of timing.

In any case, you'll need to start isolating the problem. Find out which part isn't working then you'll know what to replace/repair.

Posted on Feb 14, 2012

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Replaced an ignition module in a 1990 plymouth laser 1.8 still wont fire why it was replaced was because it died on me driving down road someone told me to start there,help


Start with looking for a vacuum leak, check all lines and at the throttle body. Make sure all the mounting bolts are tight. Then I would look at the fuel pump and the electrical connections. Last look to see if the head gasket is leaking, perform a compression test. Might check camshaft lobes for wear. Hope that Helps.

Feb 02, 2014 | 1990 Plymouth Laser

2 Answers

My 93 Plymouth voyager wont start or make a clicking noise when I urn the key


The clicking you hear it the starter engaging the flywheel but not rotating it - the starter motor has failed. It must be replaced.

Sep 01, 2010 | Plymouth Voyager Cars & Trucks

1 Answer

93 plymouth laser, what could cause it to slow drive, as in on take off, i can have the gas pedal to the floor and it will take a while to get up to 20 mph, it is extremely slow on take off. and it has...


EITHER THE TRANSMISSION SLIPPING.CHECK FLUID.IF IT LOOK DARK SMELL BURNT REPLACE TRANSMISSION FLUID AND FILTER.IF TRANSMISSION CHECKS OUT OKAY.YOU COULD HAVE A PLUGGED EXHAUST SYSTEM LIKE STOPPED UP CATALYTIC CONVERTER OR STOPPED UP MUFFLER.

May 31, 2010 | 1993 Plymouth Laser

1 Answer

I have a 1993 Plymouth Laser and it wont start. It will turn over but no spark. I tried to do the on ACC on ACC On and the check engine will not blink any codes. Any suggestions?


crank sensor, PCM, or Ignition module could be bad You car may have a ign fuse or ecm fuse that could of popped. Now if your not sure it has spark then you could have a fuel issue. If someones sprays a little brake cleaner in the Throttle body and it starts then you have a pump issue. If it still doeant fire up then you know for sure you have a spark issue.

Nov 21, 2009 | 1993 Plymouth Laser

1 Answer

91 plymouth laser sat 30days wont start


Dead battery? Need more info to help you. Whats it doing? Does the engine turn over?

Oct 04, 2009 | 1991 Plymouth Laser

1 Answer

Very hard to start when cold


Solution: don't start when cold.

Dec 19, 2008 | 1993 Plymouth Laser

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

323 people viewed this question

Ask a Question

Usually answered in minutes!

Top Plymouth Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7772 Answers

Are you a Plymouth Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...