Question about 1987 Honda Accord

Open Question

I need the timing mark specs for a 1987 Honda Accord. Just put on new timing belt and dont know where to point crankshaft

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
leedavidian
  • 1420 Answers

SOURCE: timing belt marks for honda accord with 2.3L

Thank you for Using FixYa.com, Regards, Lee Davidian29dd0e2.png6bc5020.pngc49973d.png6f9942d.png

Posted on Mar 25, 2010

Ad
  • 8 Answers

SOURCE: crankshaft pulley timing marks

http://www.manualnguide.com/download/manual-guide/honda-civic-1988-1990-service-manual.html

Posted on Sep 01, 2008

  • 333 Answers

SOURCE: vacumm hose diagram for 1987 honda accord

You did not clarify which motor you have. Here are both diagrams.

The fuel injected model:
549028f.gif

And the carb model:
d73392d.gif

Posted on Sep 10, 2009

Testimonial: "Guru this is amazing I have to ask where did you find this I have been on the web for days and just couldn't find one till now --I bow down God Bless"

  • 105 Answers

SOURCE: No vacuum hose routing diagram under the hood 1987 honda accord

email me at TOSTYLEZ@LIVE.CA
I will send u it

Posted on Sep 24, 2009

SOURCE: Torque specs for 96 Honda Accord 2.2L

the main bearings bolts is to 1st step 30Nm or 22lbs ft and the last step is 75Nm or 54lbs ft in this tighten secuence. 9 3 1 5 7 on the top bolts and........ ........ ........ ... 8 6 2 4 10 botton bolts and the connecting rod 45Nm or 34 lbs ft i hope be help you

Posted on Nov 09, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i time my car with out a timing gun


A "timing gun" is used for setting the distributor/ignition timing when the engine is running. If you are trying to replace a cam timining belt, the timing mark for the crankshaft is on the REAR of the engine on the flywheel and the transmission housing. The cam timing marks are on the camshaft sprocket and you align them with the valve cover mating surface on the cylinder head./

Dec 26, 2011 | 1987 Honda Accord

1 Answer

Need to know how to replace the belts on a 1992 Honda accord.


How to dismantling and change timing belt for CB7 engine:
1. remove elektrik power (+) from accumulator
2. put suport on below engine
3. remove the bolt and left engine mounting
4. remove upper engine cover
5. open side engine cover (timing cover from black plastic)
6. please remember top marking on the crankshaft
7. make to slack tensioner wheel, and remove the belt.

note : there are two timing belt on cb7 engine, smaller and bigger

you can try
my number call +6281808024008 (Dede)

Jul 12, 2011 | 1992 Honda Accord

1 Answer

Timing belt alignment for an 1988 honda accord


Put the crank on top dead centre.there will be a mark on the crank sprocket and case also there will be a mark on the cam gear. Though allways use tippex to put your own marks on the sprockets and case before removing the old belt . If you can locate the factory marks highlight them with tippex aswell. If you do this you know that the new belt has gone back exactly in the right place. Taking a few photos after you have marked it and before removing the old belt will be useful. I have had times where ive relied on factory marks and it has not been right.

Apr 20, 2011 | 1988 Honda Accord 4 Door

1 Answer

How do I tighten my timing belt on my 1987 honda accord lxi with a fuel injected A20A1 motor. I started the car and it was loose but not super loose, I want to tighten it for safety so let me know if you...


The philosophy "if ain't broke do not fix", doesn't work for the timing belt. If it broke the overhead cam stops, but the crank shaft keeps moving, and the result is one or more bent valve. Normally the repair cost is ten times more, than a timing belt change. The timing belt cannot be tighten up, it must be replaced with a new one. The manual recommend to change the timing belt at 90000miles. It is a good idea to replace other belts, and the water pump. Make sure to send your car to professionals. It is not rare for people to have problems with engine after replacing the timing belt. In all my cars I do it by myself. It is not impossible, but you will spend more time than a professional. If you decide to do it by yourself, then get the Haynes Repair Manual (Based on a complete tear down and rebuilt), specific for your car. I have one for each of my cars. Go to the part Engine, and use the chapter Timing belt removal inspection, and Top Dead Center (TDC) location, and put the number one piston at TDC on the compression stroke. This can be found by putting the thumb over the spark plug hole and the pressure will push your finger upward till piston reaches the upper point. This can be done by inserting a long blunt object into the spark plug hole. Note the point where the object stops moving out this is the TDC. Hope this will help.

Oct 24, 2010 | 1987 Honda Accord

2 Answers

Put in new rod and main bearings oil drops to zero after warmup 1997 2.2 honda accord put in manual gage to check for sure also put in new headgasket and rings good oil pressure to start then gone what am...


Well the cam bearings will have to do with this also,if it has them,if not it can be the wear in the cam carriers.But most likely the crankshaft journals are worn to much,the crank would need turning,and over size rod,and main bearings would need to be installed.

Apr 23, 2010 | 1997 Honda Accord

1 Answer

Trying to find a diagram of the timing markings for a 1989 Honda Accord


My sincere apologies for the severly delayed response.
I am personally going back to answer your unanswered questions.

I do not know if you still need this information, however I am answering it in case you still do.


Click on the following direct Link. It has the Timing Belt Diagrams with Marks for the Camshaft and Crankshaft that you will need.


Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com

http://www.2carpros.com/car_repair_information/year/1989/make/honda/model/accord/1989_honda_accord_timing_belt_diagram_marks.htm

Mar 09, 2010 | 1989 Honda Accord 4 Door

1 Answer

Camshaft timing mark crankshaft timing mark


Belt covers need to be on. Timing mark on crankshaft (while on compression stroke) should line up with TDC mark on cover. then Camshaft mark, needs to line up by looking through access hole of cover, and align mark on cam sprocket with pointer on inside of belt cover.

Oct 22, 2009 | 1987 Ford Ranger

1 Answer

I have a 1996 Honda Accord and I have replaced the timing belt...I need to know if anyone can help me with the camshaft and crankshaft markings.


There should be markings on the gears or pulleys for both parts. It would be a diamond or dot. The top part should be your cam and the mark would go on the bottom directly over the mark on the crank. The crank mark should be at high noon. They should not offset, they should be directly inline. Single overhead cam only.

Jul 07, 2009 | 1998 Honda Accord

1 Answer

Timing belt


Well basicaly there is no adjustment it has timing marks and the belt goes on with the marks on the points.cam pulley has a stamped mark up with line marks that go evenly one on each side has to be even with top of the head.crank pulley the woodruff key goes straight up facing the cam pulley.The balance pulley has a v mark on the pulley and a mark on the block and those go together, dont worry about the water pump there is not timing mark on that.Good Luck

May 23, 2009 | 1994 Honda Accord

1 Answer

Timing belt


timing may be off , NOT SET RIGHT. here is a diagram good luck and contact if you need more help.http://www.2carpros.com/car_repair_information/tec_info/1987/honda/accord/1987_honda_accord_timing_belt_diagram_marks.htm

Feb 03, 2009 | 1987 Honda Accord

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

434 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...