Question about 2004 Chevrolet Suburban
2004 Suburban 1500 Z71; passenger door ajar warning when door is shut, plus interior lights come on as a result. Also noticed that alarm has come on a couple times while in a store recently. Might be coincidental, but saw someone post about this elsewhere too. Initially thought it would be a simple fix of the typical push-button switch in the door jam...but alas, there isn't one! Some research indicates it might be the Body Control Module (BCM) and the stealership would likely have to R/R.
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: 2001 Suburban 1500
try to remove your door panel and check to see if your latch is still connected. some times the rods will drop off. That or your catch on the door itself has come loose and dropped down enough to cause the door to stick and will not open from both inside or out
Posted on Feb 23, 2009
Your going to have to remove the inside door panel to get to the three bolts that hold the out side mirror assembly. Once you have the door panel off you'll see the three bolts that hold the mirror assembly, just un-bolt and un-clip the wire harness to the electric/heated mirror. To install the new mirror assembly, just do everything in reveres. Go to Auto Zone and by extra door panel clips, there is a good chance of breaking some of the retainer clips and Auto Zone will have the step by step instructions to replacing the mirror assembly and the removal to the door panel. Good luck and keep me posted. Be glad to help.
Posted on Jun 22, 2009
Replace the rear door pin-switch if needed after testing proper operation.
It is telling the alarm the door is open all the time.
Most likely corroded terminals or wire.
Thanks for using FixYa - a 4 THUMB rating is appreciated for answering your FREE question.
Posted on Aug 29, 2009
Garage door openers hold the key to this issue. Get a ladder and read the label on your opener motor. Now days they use rolling code technology and an invitation process.
Read carefully, there are two processes, one excludes ALL other remotes, and one adds new ones...
Essentially the process is press and hold button on transmitter, then press and hold programming button on the opener... When lights flash, the two have communicated and will assign themselves a new communication code (rolling code) on every use...
Posted on Sep 21, 2009
Tips for a great answer:
Mar 26, 2017 | 1998 Lincoln Navigator
Jul 10, 2014 | 2003 Chevrolet Suburban 1500
Mar 18, 2011 | 2003 Chevrolet Suburban 1500
Aug 18, 2010 | 2005 Chevrolet Suburban
Aug 10, 2010 | 2003 Chevrolet Suburban 1500
Jan 25, 2010 | 2004 Chevrolet Suburban
Nov 19, 2009 | 2004 Chevrolet Suburban
360 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: