Question about Cars & Trucks
How to locate and replace the correct dashborad fuse
1 does it have a picture on the back of the lid of the cover of the dashboard fuse and if so put the cover right next to the fuse control panel and look at the picture of it and you will find the right fuse to take out and put it in a new one.
2 if it doesn't have a cover and the picture on the back of it then I reccomend that you take your vechile to a dealership and they should help you out with that.
3 if that doesn't work bring your vechile into a mechanic shop and tell the person what's wrong he/she will take care of it.
4 if you can't do neither of the above then your in tough luck there and you will need to find a way to figure it out by yourself.
Posted on Feb 13, 2012
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Posted on Aug 24, 2008
It is located on the back side of the underdash fuse box (junction block). You remove the lower steering column cover and knee blocker reinforcement. Then remove two plugs from the bottom of the BCM.
Remove the bolts holding the junction block to dash panel mounting bracket. Remove the junction block from the bracket. Remove screws holding the BCM to the junction block. Slide the BCM downward to disengage guide studs on jb from channels on BCM mounting bracket
Posted on Mar 23, 2009
the relay is located in the power distribution box under the hood the relay will be a square black or gray cube just pull out and make sure you rerplace it with the same type relay. refer to your owners manual for any questions regarding the fuses and relays
Posted on May 08, 2009
I had the same problem on my 07 and it turned out to be caused by the bulbs getting too hot and melting the surrounding plastic which opened the circuit powering them. I was able to fix the problem by removing the bulbs and cleaning the sockets allowing the bulbs to seat correctly. The lenses snap off to give you access to the bulbs. If you are not familiar with how interiors of cars come apart, I would not suggest doing it as you may crack the lens.
Posted on Oct 13, 2009
Tips for a great answer:
Feb 15, 2016 | 2002 Chrysler Town & Country
Dec 21, 2015 | 1996 Chrysler Town & Country
Jan 14, 2013 | 2002 Chrysler Town & Country
Jul 11, 2011 | 2005 Chrysler Town & Country
Feb 11, 2011 | 2002 Chrysler Town & Country
Dec 27, 2010 | 2002 Chrysler Town & Country
May 01, 2009 | 2001 Chrysler Town & Country
76 people viewed this question
Usually answered in minutes!