Question about 2005 Ford Taurus SE

Open Question

Code p0352 changed coil pack still miss not solid

Posted by Anonymous on

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: ENGINE MISSING

How do you know when you need to change your coil packs? How would your car perform if you need to change your coil packs?

Posted on Sep 15, 2008

Ad
  • 1565 Answers

SOURCE: pulled codes p0303 p0304 and p0352. replaced

http://www.bba-reman.com/content.aspx?content=DTC_P0352

look for a poor or broken connection

Posted on Oct 10, 2010

jaysonemanme
  • 500 Answers

SOURCE: service engine light on OBD

p0352 is not a misfire code... and anytime a coil is changed you must also change the sparkplug

Posted on May 20, 2011

  • 14036 Answers

SOURCE: 99 expedition misses. I

COULD BE CLOGGED FUEL INJECTORS OR LOW COMPRESSION IF EVERY THING ELSE CHECK OUT OKAY BEEN REPLACED.

Posted on Aug 29, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

I have a miss fire on cylinder 2and 3 I have changed coil pack ,spark plugs and wires still have the missing in it did not make a difference what else can I do


Is the computer code coming up as a misfire or are you actually feeling the misfire when you drive? Make sure all the grounds for the coil packs and engine are solid and clean. Many times there is rust corrosion under the pack or the retaining screws etc, Low compression can feel like a misfire as well. If all items are OK do a compression check to verify its not an issue.

Mar 03, 2015 | 1998 Toyota Sienna

1 Answer

I have a 2005 grand pix and 3 and 6 coil pack has no speak I change all that and the plugs and wires and the has a miss fire what do I do


check your modulator under your coil pack might have a bent pins on that coil pack or damage if only those 3/6 coil missing

Sep 10, 2013 | Cars & Trucks

1 Answer

Changed spark plugs ht leads and coil and still the car is missing when i drive it wot am i missing


With the miss you have it could be a few things.
did you change all the coil packs?
did you refit the heat shields to the new spark plug needs as these can cause a miss .
it could be the electronic module under the coil pack.
it could be a faulty injector or fuel problem..

Aug 31, 2013 | 1998 Holden VT Commodore

3 Answers

My 2004 chevy trailblazer is missing badly. Had them read the code for me at auto zone and it said I had a miss fire on the number one cylinder. I changed the plugs and it is still missing badly


Try moving the coil pack from cylinder 1 to another cylinder (swap locations) and see if the same code comes up. If code is different, then coil pack is bad. Other reasons for miss; bad injector, poor compression.
Also, I know you changed plugs already, but always use AC Delco 43-103 plugs on this vehicle.

Sep 11, 2011 | 2004 Chevrolet TrailBlazer

1 Answer

1999 Isuzu amigo, code for cylinder 1 misfire.....changed plugs still missing.....what next?


coil pack or distibuter...if coil pack you will need to change the coil pack that # 1 wire is attached to

Mar 05, 2010 | 1999 Isuzu Amigo

2 Answers

P0302 #2 cylinder miss fire code. Replaced plugs and wires but at 40 mph runs very rough. Idles smoothly but not when put in gear.


I have a 1999 ford escort 2.0, its got a miss on cylinder 3 and 4. I changed the wires and the coil pack but its still missing. When scanned I get code p1506, p0303 and p0304

Jan 02, 2010 | 2000 Ford Windstar

1 Answer

Sounds like my car has a miss


if i remember right you have a coil pack? or distibutor? if coil pack it sounds like you have a bad coil pack. if you have a pair of insulated pliers pull each plug wire to where they are just sitting in coil start car and lift each wire one at a time see if one has no spark. change coil pack

Jun 04, 2009 | 1994 Ford Thunderbird

1 Answer

1997 fordexplorer 5.0 awd #3 misfire


Change the coil that's the only thing you did not change and a coil if it's weak will cause a miss fire. You can do a compression check on #3 also. If timing was out the truck would be missing like crazy. Change the coil pack.

Mar 26, 2009 | 1997 Ford Explorer AWD

2 Answers

ENGINE MISSING


You need to see what is going on, have it put on an engine analyzer to see cause of miss, igntion or low cylinder compression, there is no other way.

Sep 06, 2008 | 1999 Ford Crown Victoria

Not finding what you are looking for?
2005 Ford Taurus SE Logo

Related Topics:

59 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5522 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...