Question about 1996 Pontiac Sunfire

2 Answers

How to change spark plugs wires 1996 pontiacsunfire

How to change the spark plugs wire in a 1996 pontiac sunfire?

Posted by on

  • pat  murray
    pat murray May 11, 2010

    what engine 2.2 =2.4 ??

×

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Pontiac Expert
  • 293 Answers

No response

Posted on Nov 04, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 123 Answers

2.2L and 2.4L are both extremely easy. If the 2.2L You'll need a a flat head screw driver for the clips and a pair of pliers to remove the boots. Remove one wire at a time. longest from the left to shortest to the right. If the 2.4L engine, they are small boots that are connected directly to the plugs to a coil- on-plug set up. You'll need to remove the 4 10mm or 13mm Bolts (can't remember which they are.) On the right hand side there is a black clip you need to remove. Once that is removed you can pickup the entire aluminum housing and you'll sell the boots them selves. Replace your new boots on to the plate and gently set the housing back down in there correct holes. Press down once all aligned and it will be ready for the bolts. If you need any clarifications, message me back and we'll go from there. Thank you for using fixya.com here is a link for a picture of what the boots will look like if you have the 2.4L engine. http://l.yimg.com/g/images/spaceball.gif

Posted on Oct 25, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to change spark plugs in 1998 pontiac sunfire


WITH 5/8 SOCKET AND THE RACHET PULL THE WIRES OFF ONE BY SO YOU WILL NOT MISS UP THE FIRING ORDER OF GETTING THE WIRES CROSS UP SET THE ON THE GAP THAT THEY SUPPOSE TO GO ON BUY THEM PRESET ,ANDBUY A SPARK GAPPER TO CHECK THEM ANY WAY , WITH A DIME A COIN THAT IS .........

Mar 13, 2011 | 1998 Pontiac Sunfire

1 Answer

How do i change spark plugs on my 4 cylinder pontiac sunfire


take one spark plug wire off at a time so u dont mess up the firing order. take plug out with plug socket and wratchet. may require socket extension

May 31, 2010 | 1996 Pontiac Firebird

1 Answer

MY 96 PONTIAC SUNFIRE 2.2LITER WONT START AFTER IT RAINS OR IT WILL STALL OUT AFTER BEING TAKEN THROUGH AUTOMATIC CARWASH ANY SUGGESTIONS ANYONE?? THANKS!


check spark plug wires and coils for moistore put some lube on the coil wires check for spark after it wont start if itll crank but not start its 1 of 2 thinks no spark or no fuel usally when the coils get too wet they wont allow spark to come through or will cause it to arc

May 07, 2010 | 1996 Pontiac Sunfire

3 Answers

Pontiac sunfire 2.2 1995 no spark from spark plugs


check for power coming from coil packs to wires, could be bad wires, coil packs, ignition module(under coilpacks). check all fuses as well

Oct 06, 2009 | 1996 Pontiac Sunfire

1 Answer

Spark plug wires correctly installed on pontiac sunfire


you need to know the firing order and then where #1 plug wire goes. Need a shop manual.

Distributor or distributorless ignition?

Feb 21, 2009 | 2003 Pontiac Sunfire

1 Answer

Help spark plug wire 95 sunfire 2.2


so did u change the wires or not? - if not thats what yu need to do...esp the main coil wire. Also did u change the rotor button and distributor cap ? if not do those too.

Jan 07, 2009 | 1995 Pontiac Sunfire

1 Answer

Changing spark plug wires


WEll u dont need to remove anything This is what i did lift your car up with a jack. where you oil filter is you will see you plug wires running into your (ICM) Ignition Module unplug them and slide them to the top of your motor. dont get them mixed up otherwise your timeing will be messed up and your car wont start. on the ICM from the top to bottom the plug numbers are 2,3,1,4 and on top of the moter from left to right 1,2,3,4 just make for sure u have the right order..

Aug 28, 2008 | 1995 Pontiac Sunfire

Not finding what you are looking for?
1996 Pontiac Sunfire Logo

282 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

60792 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...