Question about 2006 Ford Fusion

1 Answer

My ford fusion will not start,it gives me a message saying brake failure,but then will start after several try's any ideas?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 5,370 Answers

Car not starting or turning over indicates towards multiple possibilities. It can be issue with battery or weak battery. But if battery checks out ok, then it can be starter issue or faulty alternator or problem with low fuel pressure or no spark at spark plugs due to dirty spark plugs or faulty ignition coil or injectors getting cracked or dirty and needs to be cleaned.


To confirm the problem, the basic troubleshooting is required.


Click this link below and follow the troubleshooting:------

http://technoanswers.blogspot.in/2012/02/car-starting-issues.html

---------

This will help.

Thanks.

Posted on Mar 03, 2012

Testimonial: "Yes bad battery was the problem got a new one and no more problem thaks"

Ad

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

SOURCE: I have a 5dr ford fusion with a brake light that goes on -on turns

Possible the brake line is being crimped. Need to look under the wheel and turn it to the right to see what is going on.

Posted on Oct 18, 2008

  • 280 Answers

SOURCE: ford focus brake light failure !!!

1 - are you SURE theyre the right bulbs! - if theyre too bright they can blow the fuse, if theyre the wrong type of bulb they will blow the fuse.. best get the bulbs direct from ford, they are always in stock, so are the proper fuses.
2 - theres a center brakelight isnt there? check this bulb too for proper wattage and size/shape
Other than that maybe the wiring in the boot is damaged and shorting?? -----
Leave feedback good or bad.

Posted on Jan 21, 2010

thisway35
  • 70 Answers

SOURCE: I HAVE A 2009 FORD FUSION AND IT'S NOT GOING OVER 20 MPH

You are not driving in first gear are you? Is the park brake on?

Posted on Dec 01, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

2009 fusion SEL has data compass error after being rear ended and a shop did repair.


WHAT IS A COMPASS ERROR FOR A 2009 FORD FUSION ...

www.fixya.com/cars/t16705785-compass_error_2009_ford_fusion
Feb 21, 2013 - WHAT IS A COMPASS ERROR FOR A 2009 FORD FUSION A MESSAGE COMES UP ON MY DASH SAYS COMPASS NO ... SOURCE: I HAVE A2009 FORD FUSION AND IT'S NOT GOING OVER 20 MPH ... Compass data error -- how do i determine my zone-- ... Jan 28, 2010 ' 2007 Ford Edge SEL Plus.

Compass - Ford Fusion Sport - Ford Fusion Forum

www.fordfusionforum.com/topic/9390-compass/
Jan 23, 2013 - Compass - posted in Ford Fusion Sport: 2011 Fusion SEL without navigation screen. Following windshield ... I have recalibrated and reset the compassaccording to the manual instructions (several times) but cannot correct the error. Can anyone help? ... picture of where it is: 2009-08-30_051718_2.gif.

Nov 08, 2015 | 2009 Ford Fusion

2 Answers

2014 ford fusion engine wont crank after wreck


Ford fusion won't start - YouTube

? 2:01
www.youtube.com/watch?v=H0BhHWT2cyY
Sep 16, 2014 - Uploaded by mlmunoz21
Ford fusion won't start ... Published on Sep 16, 2014 .... 2004-2008 F150 Died Out No Crank Theft Light ...

Ford Fusion won't start - YouTube

? 0:32
www.youtube.com/watch?v=lmH7R6Ebmyc
Jan 9, 2015 - Uploaded by Nicholas A.
Any ideas why it won't start? 2007 ford Fusion awd 6 cylinder. ... And P1260 2007 Ford Fusion - Theft ...

Nov 02, 2015 | 2014 Ford Fusion

1 Answer

Trying to find the earthing point on my ford fusion?


The earthing point goes from the bulb holder to the chassis of the car, try connecting the metal bulb holder surround with a piece of wire, if OK make it a permanent connection.

Feb 09, 2015 | 2005 Ford Fusion 1.6

1 Answer

Rear brake cailpers won't collapse on 2007 ford fusion


Open bleeder valve & push caliper piston, in as
you rotate piston to screw in parking brake

Do this by hand,only use a clamp on the front calipers

Apr 08, 2013 | 2008 Ford Fusion

1 Answer

2012 ford fusion 2.5 misfiring but no dtc's


You have a mechanical problem,There is no sensor that can do this, Running out of fuel can do this,A cam and crank that is not synchronized can do this,Try this remove the variable timing actuator,clean out the port with brake cleaner,install and restart,

Feb 26, 2013 | 2012 Ford Fusion S Sedan 2.5L 4-cyl....

1 Answer

2010 fusion tail lights won't turn off


I suggest check brake switch, underdash, top back side brake pedal or some short/ground there.

Apr 23, 2012 | 2010 Ford Fusion 3.5

1 Answer

I HAVE A 2009 FORD FUSION AND IT'S NOT GOING OVER 20 MPH


You are not driving in first gear are you? Is the park brake on?

Dec 01, 2011 | 2009 Ford Fusion

3 Answers

How to overide limp mode in 2006 ford fusion


put the key in the ignition, and turn it so the lights and everything come on, do not start the engine, then pump the brakes 3 times, turn it off, and then start the engine. This worked for my 2008 for fusion. (if the brakes don't work, try the gas 3 times make sure the engine is off and the car is in park)
Best of luck!

Mar 01, 2011 | 2006 Ford Fusion

1 Answer

Our ford fusion wont start then battery goes flat weve tried tried jumping it but it still wont start any ideas


Check the Inertia switch and push the reset button for 3 seconds. This switch is usually in the rear area of the vehicle. It can activate if a door or trunklid is slammed too hard.

You should hear the fuelpump running for several seconds when you turn the key on. If this does not work you need to determine if it is a spark or fuel problem. Also look at the front of the motor if it is a 4 cylinder to see if the timing belt broke.

Nov 29, 2009 | 2004 Ford Fusion

1 Answer

I have a 5dr ford fusion with a brake light that goes on -on turns


Possible the brake line is being crimped. Need to look under the wheel and turn it to the right to see what is going on.

Oct 13, 2008 | 2006 Ford Focus

Not finding what you are looking for?

Open Questions:

See all 2006 Ford Fusion Questions

2006 Ford Fusion Logo

1,252 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5522 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...