Question about 1998 Chevrolet Cavalier

Open Question

Replacement of engine cradle - 1998 Chevrolet Cavalier

Posted by on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need to remove the exhaust manifold on the right side of a 94 4.9l engine in a cadillac deville. It has a broken bolt in the exhaust. What is involved in removing the manifold?


I suggest you use all new exhaust manifold hardware and torque new bolts to 20 Ft Lbs.
4.5L and 4.9L Engines
RIGHT
Disconnect the negative battery cable. Remove the air cleaner. Remove the exhaust crossover pipe. Disconnect the oxygen and coolant temperature sensors. Remove the catalytic converter-to-AIR pipe clip bolt. Remove the upper manifold-to-cylinder head bolts. Raise and safely support the vehicle. Disconnect the converter air pipe bracket from the stud and remove the converter-to-manifold exhaust pipe. Support the engine cradle with screw jacks and remove the rear cradle bolts. Loosen the front cradle bolts and slightly lower the Engine cradle. Remove the remaining exhaust manifold-to-cylinder head bolts, the AIR pipe, and the manifold. Clean the gasket mounting surfaces.
To install:
Install the exhaust manifold and replace the AIR pipe. Tighten the manifold mounting bolts to 16-18 ft. lbs. (21-24 Nm). Install the manifold-to-converter exhaust pipe and replace the converter air pipe bracket to the stud. Raise the Engine cradle and install the rear cradle bolts. Tighten to 75 ft. lbs. (102 Nm). Lower the vehicle. Replace the upper manifold-to-cylinder head bolts. Replace the converter air pipe to AIR pipe clip bolt. Connect the coolant temperature and oxygen sensor connectors. Replace the exhaust crossover pipe. Replace the air cleaner and connect the negative battery cable. Start the Engine and check for leaks.

Mar 28, 2017 | Cadillac Cars & Trucks

1 Answer

Does the Hyundai accent 2000 have a front cradle?


if it is a unibody then it will have an engine cradle or sub-frame that supports the engine and transmission. If you plan on replacing the subframe you will need to support the engine and transmission from the top side with an engine support fixture.



26303677-npphzl2gzuh4obgjeqzdintl-4-0.gif


Subframe/cradle



26303677-npphzl2gzuh4obgjeqzdintl-4-1.png

Oct 07, 2016 | 2000 Hyundai Accent

1 Answer

How to replace engine cradle on 2001 alero


1st thing you need to do is have the engine secured with an engine brace bar across top of engine with chains, next lift car in air high enough to get under it, next disconnect exhaust from down pipe, remove bolts from engine mounting brackets should be at least 2 one in front and one in rear,next disconnect power steering rack bolts out, they will be in the rear of the engine, next take the remaining cradle bolts out should be 19 or 21mm bolts, or somewhere in that size range, there should be 4 ouf them on each corner of the cradle. cradle is now out. hope this helps

Jun 11, 2014 | 1999 Oldsmobile Alero

1 Answer

How to replace engine cradle 1994 toyota truck


The truck doesn't have a seperate engine cradle the engine mounts directly to the frame to brackets that are welded on.

Dec 08, 2012 | Toyota Cars & Trucks

1 Answer

How do I replace pipes in back of engine for heater


Hello: One way is to remove the cover on the front bottom of the engine/cradle assembly. Then put a jack under the center of the cradle at the front of the engine. Remove the two front cradle bolts (18mm) and lower the cradle/engine assembly down, this will give more room to access the clamps that hold the pipes on. It is not an easy task.

Nov 08, 2010 | 1999 Cadillac DeVille

1 Answer

How hard is it to remove engine cradle


ENGINE CRADLE OR DOLLY YOU SET ENGINE DOWN ON ROLL ENGINE AWAY FROM VECHICLE TO REMOVE ENGINE FROM CRADLE USE A ENGINE CRANE OR ENGINE CHAIN HOIST.

Oct 30, 2010 | 1999 Oldsmobile Alero

1 Answer

How to replace the cradle on a 2006 monte carlo


you will need an engine support that mounts up top and holds engine up. and just remove bolts to cradle mounts and control arms,steering rack so forth.

Feb 11, 2010 | 2006 Chevrolet Monte Carlo

2 Answers

What is a engine cradle


The engine cradle holds or "cradles" the motor in place. It acts as the sub frame of the car. Hyundai has a big problem with the cradles rusting through in places making the car unsafe to drive.

Oct 12, 2009 | 2001 Hyundai Sonata

2 Answers

When I drive over bumps I feel something hitting under my feet


I have Chrysler's 8year 80000 mile max care warranty and Chrysler just spent about 4,000 dollars replacing my engine cradle. HAVE ALL PACIFICA'S CHECKED FOR RUST ON ENGINE CRADLE IF IT IS RUSTING CALL NHTSA THEY WILL TAKE A COMPLAINT OVER THE PHONE. YOU NEED A RECALL ON THIS ALSO CALL THE BETTER BUSINESS BUREAU

Apr 01, 2009 | 2004 Chrysler Pacifica

Not finding what you are looking for?
1998 Chevrolet Cavalier Logo

Related Topics:

328 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8152 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...