Question about 1998 Ford Windstar
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: PATS KEY
Unfortunately there is no other solution unless you can find a shop that has an NGS scan tool,this tool will work also.
You might try some of your local locksmiths some of them have this technology now. See in order to program another key when you only have one is to be able to link up to the pats system and perform a security access.
Posted on Feb 04, 2009
insert one key and turn on quickly insert second key and turn on then off and same for the third new key if the third programmed correctly the theft light should be on steady not blinking
Posted on May 23, 2009
SOURCE: Ford Windstar
need to see if u have fuel and spark... if u do then lock drivers door with key wait for maybe 3 min then unlock door with key... then try to start also check fuel pressure
Posted on Jun 25, 2009
those two codes are for the o2 sensors. both are the upstream sensors on the front and rear banks. so they are desinagted bank 1 sensor 1 and bank 2 sensor 1. them most common cause for this is faulty o2sensors , bad gas and of a poor running engine. so if your car runs good (no misfire) and gas is ok then replace the o2sensor witch is the very most common cause.
Posted on Jan 28, 2010
Testimonial: " Help With Problem But Where Are These O2 Sensor"
Tips for a great answer:
Jul 06, 2017 | Ford Cars & Trucks
Mar 21, 2016 | Ford Cars & Trucks
Mar 02, 2013 | 2001 Ford Windstar
Jun 14, 2011 | 1999 Ford Windstar
Aug 22, 2010 | 1999 Ford Windstar
Aug 17, 2010 | 2003 Ford Windstar
May 01, 2010 | 1998 Ford Windstar
May 22, 2009 | 1999 Ford Windstar
54 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: